lpfc_sli_brdready_s3(9)

💅 lpfc_sli_brdready_s3 — from the Kernel API Manual (yes, the real one, not a vibe)

Okay bestie, gather round, because today we're reading a kernel function and honestly? It's kind of a baddie. This is the page for lpfc_sli_brdready_s3, straight out of the Kernel API Manual, and it's about one thing and one thing only: finding out whether your SLI3 host finally woke up and got ready. ✨

---

🌸 NAME 🌸

lpfc_sli_brdready_s3 — check for sli3 host ready status. That's it. That's the whole job. She checks, she reports, she leaves. 👑

---

🎀 SYNOPSIS 🎀

int lpfc_sli_brdready_s3 (struct lpfc_hba *phba , uint32_t mask );

Returns an int, takes two args, no drama. 🫶

---

🦋 ARGUMENTS 🦋

• phba — pointer to the HBA context object. Like, the whole personality of your host bus adapter lives in here, so hand her over gently. 💖
• mask — the bit mask to be checked. This is the specific set of bits you're side-eyeing in the host status register. 👀

---

⭐ DESCRIPTION ⭐

So here's the tea, bestie: this function reads the host status register and compares it against the bit mask you handed it, all to figure out whether the HBA actually finished its restart. Like a "u up?" text, but for hardware. 📱💀

The way that it works is it waits in a loop for the HBA to complete the restart. She's patient. She's committed. She's sitting there refreshing the register like it's a group chat at 2am. 🌙

But — and this is the important part, ngl — if the HBA does not restart within 15 iterations, the function will reset the HBA again. Not a drill. Fifteen tries and then it's hands. 🙈

Return value, because you will be asked:

1. Returns 1 when the HBA fails to restart. 😭 (yes, one means bad, keep up)
2. Otherwise it returns zero. 🎉 Zero is the slay outcome here.

fr fr, don't flip these in your head. 1 = the HBA did not restart. 0 = everything's iconic and we move on. 💅

---

🔥 SEE ALSO 🔥

Everything is connected, iykyk. These all live in the kernel file ./drivers/scsi/lpfc/lpfc_sli.c — one big happy family of functions, and yes, you're getting the full list because we don't gatekeep here. 🌈

Kernel file ./drivers/scsi/lpfc/lpfc_sli.c lpfc_sli4_pcimem_bcopy(9),
lpfc_sli4_wq_put(9), lpfc_sli4_wq_release(9), lpfc_sli4_mq_put(9),
lpfc_sli4_mq_release(9), lpfc_sli4_eq_get(9), lpfc_sli4_eq_clr_intr(9),
lpfc_sli4_if6_eq_clr_intr(9), lpfc_sli4_write_eq_db(9),
lpfc_sli4_if6_write_eq_db(9), lpfc_sli4_cq_get(9),
lpfc_sli4_write_cq_db(9), lpfc_sli4_if6_write_cq_db(9),
lpfc_cmd_iocb(9), lpfc_resp_iocb(9), __lpfc_sli_get_iocbq(9),
__lpfc_clear_active_sglq(9), __lpfc_get_active_sglq(9),
lpfc_clr_rrq_active(9), lpfc_handle_rrq_active(9),
lpfc_get_active_rrq(9), lpfc_cleanup_vports_rrqs(9),
lpfc_test_rrq_active(9), lpfc_set_rrq_active(9),
__lpfc_sli_get_els_sglq(9), __lpfc_sli_get_nvmet_sglq(9),
lpfc_sli_get_iocbq(9), __lpfc_sli_release_iocbq_s4(9),
__lpfc_sli_release_iocbq_s3(9), __lpfc_sli_release_iocbq(9),
lpfc_sli_release_iocbq(9), lpfc_sli_cancel_iocbs(9),
lpfc_sli_iocb_cmd_type(9), lpfc_sli_ring_map(9),
lpfc_sli_ringtxcmpl_put(9), lpfc_sli_ringtx_get(9),
lpfc_cmf_sync_cmpl(9), lpfc_issue_cmf_sync_wqe(9),
lpfc_sli_next_iocb_slot(9), lpfc_sli_next_iotag(9),
lpfc_sli_submit_iocb(9), lpfc_sli_update_full_ring(9),
lpfc_sli_update_ring(9), lpfc_sli_resume_iocb(9),
lpfc_sli_next_hbq_slot(9), lpfc_sli_hbqbuf_free_all(9),
lpfc_sli_hbq_to_firmware(9), lpfc_sli_hbq_to_firmware_s3(9),
lpfc_sli_hbq_to_firmware_s4(9), lpfc_sli_hbqbuf_fill_hbqs(9),
lpfc_sli_hbqbuf_add_hbqs(9), lpfc_sli_hbqbuf_init_hbqs(9),
lpfc_sli_rqbuf_get(9), lpfc_sli_hbqbuf_find(9), lpfc_sli_free_hbq(9),
lpfc_sli_chk_mbx_command(9), lpfc_sli_wake_mbox_wait(9),
lpfc_sli_def_mbox_cmpl(9), lpfc_sli_handle_mb_event(9),
lpfc_sli_get_buff(9), lpfc_nvme_unsol_ls_handler(9),
lpfc_complete_unsol_iocb(9), lpfc_sli_process_unsol_iocb(9),
lpfc_sli_iocbq_lookup(9), lpfc_sli_iocbq_lookup_by_tag(9),
lpfc_sli_process_sol_iocb(9), lpfc_sli_rsp_pointers_error(9),
lpfc_poll_eratt(9), lpfc_sli_handle_fast_ring_event(9),
lpfc_sli_sp_handle_rspiocb(9), lpfc_sli_handle_slow_ring_event(9),
lpfc_sli_handle_slow_ring_event_s3(9),
lpfc_sli_handle_slow_ring_event_s4(9), lpfc_sli_abort_iocb_ring(9),
lpfc_sli_abort_fcp_rings(9), lpfc_sli_flush_io_rings(9),
lpfc_sli_brdready_s4(9), lpfc_sli_brdready(9), lpfc_reset_barrier(9),
lpfc_sli_brdkill(9), lpfc_sli_brdreset(9), lpfc_sli4_brdreset(9),
lpfc_sli_brdrestart_s3(9), lpfc_sli_brdrestart_s4(9),
lpfc_sli_brdrestart(9), lpfc_sli_chipset_init(9), lpfc_sli_hbq_count(9),
lpfc_sli_hbq_entry_count(9), lpfc_sli_hbq_size(9),
lpfc_sli_hbq_setup(9), lpfc_sli4_rb_setup(9), lpfc_sli_config_port(9),
lpfc_sli_hba_setup(9), lpfc_sli4_read_fcoe_params(9),
lpfc_sli4_read_rev(9), lpfc_sli4_get_ctl_attr(9),
lpfc_sli4_retrieve_pport_name(9), lpfc_sli4_arm_cqeq_intr(9),
lpfc_sli4_get_avail_extnt_rsrc(9), lpfc_sli4_chk_avail_extnt_rsrc(9),
lpfc_sli4_cfg_post_extnts(9), lpfc_sli4_alloc_extent(9),
lpfc_sli4_dealloc_extent(9), lpfc_ras_stop_fwlog(9),
lpfc_sli4_ras_dma_free(9), lpfc_sli4_ras_dma_alloc(9),
lpfc_sli4_ras_mbox_cmpl(9), lpfc_sli4_ras_fwlog_init(9),
lpfc_sli4_ras_setup(9), lpfc_sli4_alloc_resource_identifiers(9),
lpfc_sli4_dealloc_resource_identifiers(9),
lpfc_sli4_get_allocated_extnts(9), lpfc_sli4_repost_sgl_list(9),
lpfc_sli4_repost_io_sgl_list(9), lpfc_init_idle_stat_hb(9),
lpfc_rx_monitor_create_ring(9), lpfc_rx_monitor_destroy_ring(9),
lpfc_rx_monitor_record(9), lpfc_rx_monitor_report(9), lpfc_cmf_setup(9),
lpfc_get_platform_uuid(9), lpfc_sli4_hba_setup(9), lpfc_mbox_timeout(9),
lpfc_sli4_mbox_completions_pending(9),
lpfc_sli4_process_missed_mbox_completions(9),
lpfc_mbox_timeout_handler(9), lpfc_sli_issue_mbox_s3(9),
lpfc_sli4_async_mbox_block(9), lpfc_sli4_async_mbox_unblock(9),
lpfc_sli4_wait_bmbx_ready(9), lpfc_sli4_post_sync_mbox(9),
lpfc_sli_issue_mbox_s4(9), lpfc_sli4_post_async_mbox(9),
lpfc_sli_issue_mbox(9), lpfc_mbox_api_table_setup(9),
__lpfc_sli_ringtx_put(9), lpfc_sli_next_iocb(9),
__lpfc_sli_issue_iocb_s3(9), __lpfc_sli_issue_fcp_io_s3(9),
__lpfc_sli_issue_fcp_io_s4(9), __lpfc_sli_issue_iocb_s4(9),
lpfc_sli_api_table_setup(9), lpfc_sli4_calc_ring(9),
lpfc_sli_issue_iocb(9), lpfc_extra_ring_setup(9),
lpfc_sli_async_event_handler(9), lpfc_sli4_setup(9), lpfc_sli_setup(9),
lpfc_sli4_queue_init(9), lpfc_sli_queue_init(9),
lpfc_sli_mbox_sys_flush(9), lpfc_sli_host_down(9), lpfc_sli_hba_down(9),
lpfc_sli_pcimem_bcopy(9), lpfc_sli_bemem_bcopy(9),
lpfc_sli_ringpostbuf_put(9), lpfc_sli_get_buffer_tag(9),
lpfc_sli_ring_taggedbuf_get(9), lpfc_sli_ringpostbuf_get(9),
lpfc_sli_abort_els_cmpl(9), lpfc_ignore_els_cmpl(9),
lpfc_sli_issue_abort_iotag(9), lpfc_sli_hba_iocb_abort(9),
lpfc_sli_validate_fcp_iocb_for_abort(9), lpfc_sli_validate_fcp_iocb(9),
lpfc_sli_sum_iocb(9), lpfc_sli_abort_fcp_cmpl(9),
lpfc_sli_abort_iocb(9), lpfc_sli_abort_taskmgmt(9),
lpfc_sli_wake_iocb_wait(9), lpfc_chk_iocb_flg(9),
lpfc_sli_issue_iocb_wait(9), lpfc_sli_issue_mbox_wait(9),
lpfc_sli_mbox_sys_shutdown(9), lpfc_sli_eratt_read(9),
lpfc_sli4_eratt_read(9), lpfc_sli_check_eratt(9),
lpfc_intr_state_check(9), lpfc_sli_sp_intr_handler(9),
lpfc_sli_fp_intr_handler(9), lpfc_sli_intr_handler(9),
lpfc_sli4_els_xri_abort_event_proc(9),
lpfc_sli4_els_preprocess_rspiocbq(9),
lpfc_sli4_sp_handle_async_event(9), lpfc_sli4_sp_handle_mbox_event(9),
lpfc_sli4_sp_handle_mcqe(9), lpfc_sli4_sp_handle_els_wcqe(9),
lpfc_sli4_sp_handle_rel_wcqe(9), lpfc_sli4_sp_handle_abort_xri_wcqe(9),
lpfc_sli4_sp_handle_rcqe(9), lpfc_sli4_sp_handle_cqe(9),
lpfc_sli4_sp_handle_eqe(9), __lpfc_sli4_process_cq(9),
__lpfc_sli4_sp_process_cq(9), lpfc_sli4_sp_process_cq(9),
lpfc_sli4_dly_sp_process_cq(9), lpfc_sli4_fp_handle_fcp_wcqe(9),
lpfc_sli4_fp_handle_rel_wcqe(9), lpfc_sli4_nvmet_handle_rcqe(9),
lpfc_sli4_fp_handle_cqe(9), __lpfc_sli4_hba_process_cq(9),
lpfc_sli4_hba_process_cq(9), lpfc_sli4_hba_handle_eqe(9),
lpfc_sli4_dly_hba_process_cq(9), lpfc_sli4_hba_intr_handler(9),
lpfc_sli4_intr_handler(9), lpfc_sli4_queue_free(9),
lpfc_sli4_queue_alloc(9), lpfc_dual_chute_pci_bar_map(9),
lpfc_modify_hba_eq_delay(9), lpfc_eq_create(9),
lpfc_sli4_hba_intr_handler_th(9), lpfc_cq_create(9),
lpfc_cq_create_set(9), lpfc_mq_create_fb_init(9), lpfc_mq_create(9),
lpfc_wq_create(9), lpfc_rq_create(9), lpfc_mrq_create(9),
lpfc_eq_destroy(9), lpfc_cq_destroy(9), lpfc_mq_destroy(9),
lpfc_wq_destroy(9), lpfc_rq_destroy(9), lpfc_sli4_post_sgl(9),
lpfc_sli4_alloc_xri(9), __lpfc_sli4_free_xri(9), lpfc_sli4_free_xri(9),
lpfc_sli4_next_xritag(9), lpfc_sli4_post_sgl_list(9),
lpfc_sli4_post_io_sgl_block(9), lpfc_sli4_post_io_sgl_list(9),
lpfc_fc_frame_check(9), lpfc_fc_hdr_get_vfi(9),
lpfc_fc_frame_to_vport(9), lpfc_update_rcv_time_stamp(9),
lpfc_cleanup_rcv_buffers(9), lpfc_rcv_seq_check_edtov(9),
lpfc_fc_frame_add(9), lpfc_sli4_abort_partial_seq(9),
lpfc_sli4_abort_ulp_seq(9), lpfc_sli4_seq_abort_rsp_cmpl(9),
lpfc_sli4_xri_inrange(9), lpfc_sli4_seq_abort_rsp(9),
lpfc_sli4_handle_unsol_abort(9), lpfc_seq_complete(9), lpfc_prep_seq(9),
lpfc_sli4_handle_received_buffer(9), lpfc_sli4_post_all_rpi_hdrs(9),
lpfc_sli4_post_rpi_hdr(9), lpfc_sli4_alloc_rpi(9),
__lpfc_sli4_free_rpi(9), lpfc_sli4_free_rpi(9),
lpfc_sli4_remove_rpis(9), lpfc_sli4_resume_rpi(9),
lpfc_sli4_init_vpi(9), lpfc_mbx_cmpl_add_fcf_record(9),
lpfc_sli4_add_fcf_record(9), lpfc_sli4_build_dflt_fcf_record(9),
lpfc_sli4_fcf_scan_read_fcf_rec(9), lpfc_sli4_fcf_rr_read_fcf_rec(9),
lpfc_sli4_read_fcf_rec(9), lpfc_check_next_fcf_pri_level(9),
lpfc_sli4_fcf_rr_next_index_get(9), lpfc_sli4_fcf_rr_index_set(9),
lpfc_sli4_fcf_rr_index_clear(9), lpfc_mbx_cmpl_redisc_fcf_table(9),
lpfc_sli4_redisc_fcf_table(9), lpfc_sli4_fcf_dead_failthrough(9),
lpfc_sli_get_config_region23(9), lpfc_sli4_get_config_region23(9),
lpfc_sli_read_link_ste(9), lpfc_log_fw_write_cmpl(9), lpfc_wr_object(9),
lpfc_cleanup_pending_mbox(9), lpfc_drain_txq(9), lpfc_wqe_bpl2sgl(9),
lpfc_sli4_issue_wqe(9), lpfc_sli4_issue_abort_iotag(9),
lpfc_snapshot_mxp(9), lpfc_adjust_pvt_pool_count(9),
lpfc_adjust_high_watermark(9), lpfc_move_xri_pvt_to_pbl(9),
_lpfc_move_xri_pbl_to_pvt(9), lpfc_move_xri_pbl_to_pvt(9),
lpfc_keep_pvt_pool_above_lowwm(9), lpfc_release_io_buf(9),
lpfc_get_io_buf_from_private_pool(9),
lpfc_get_io_buf_from_expedite_pool(9),
lpfc_get_io_buf_from_multixri_pools(9), lpfc_get_io_buf(9),
lpfc_read_object(9), lpfc_get_sgl_per_hdwq(9), lpfc_put_sgl_per_hdwq(9),
lpfc_free_sgl_per_hdwq(9), lpfc_get_cmd_rsp_buf_per_hdwq(9),
lpfc_put_cmd_rsp_buf_per_hdwq(9), lpfc_free_cmd_rsp_buf_per_hdwq(9),
lpfc_sli_prep_wqe(9)

---

And that's the whole page, bestie. No notes. 💜

This little beauty lives in ./drivers/scsi/lpfc, and the version of the page you're reading is dated October 2026 — so like, future-era documentation, main character energy only. 🧚‍♀️✨ Go check your host status register. She's probably ready. If she's not, you've got exactly 15 iterations before things get spicy. 💀🔥