e1000_get_phy_cfg_done(9)

💅 e1000_get_phy_cfg_done(9) ✨

okay bestie, welcome to the Kernel API Manual 🎀 — this page is all about e1000_get_phy_cfg_done, and yes she's a kernel function, yes she's got a (9) after her name, and yes that's just how manpages do. main character energy fr.

---

🌸 NAME 🌸

e1000_get_phy_cfg_done —

not me leaving the description blank 😭 that's literally how the original page is, the dash is just sitting there with nothing after it, living its truth, and honestly? iconic. no notes.

---

🦋 SYNOPSIS 🦋

s32 e1000_get_phy_cfg_done (struct e1000_hw *hw );

that's the whole vibe — she takes one pointer and hands you back a s32, periodt.

---

💖 ARGUMENTS 💖

• hw — a struct containing variables accessed by shared code. yes, shared code, the communal apartment of kernel structs 🏠✨

---

🔥 DESCRIPTION 🔥

the actual job: checks if the PHY configuration is done 👑

that's it. that's the whole function. she looks at the PHY config, she finds out if it's finished or not, and she tells you. lowkey a vibe check for hardware. 🫶

---

⭐ RETURN ⭐

• E1000_ERR_RESET if it fails to reset the MAC — 😭 that's the bad ending
• E1000_SUCCESS at any other case — 💖 that's the good ending, we love to see it

so like, two outcomes: the MAC reset didn't go through and you get the error, or literally anything else and it's a E1000_SUCCESS slay. 🌈

---

👑 SEE ALSO 👑

the source file for this whole situation lives at Kernel file ./drivers/net/ethernet/intel/e1000/e1000_hw.c — go read her, she's long but she's worth it 🧚

and here's the extended fam, all of them (9) pages, all of them exactly as printed, no cap:

• e1000_set_phy_type(9), e1000_phy_init_script(9), e1000_set_mac_type(9), e1000_set_media_type(9), e1000_reset_hw(9), e1000_init_hw(9)
• e1000_adjust_serdes_amplitude(9), e1000_setup_link(9), e1000_setup_fiber_serdes_link(9), e1000_copper_link_rtl_setup(9), e1000_copper_link_preconfig(9), e1000_copper_link_igp_setup(9), e1000_copper_link_mgp_setup(9), e1000_copper_link_autoneg(9), e1000_copper_link_postconfig(9), e1000_setup_copper_link(9)
• e1000_phy_setup_autoneg(9), e1000_phy_force_speed_duplex(9), e1000_config_collision_dist(9), e1000_config_mac_to_phy(9), e1000_force_mac_fc(9), e1000_config_fc_after_link_up(9), e1000_check_for_serdes_link_generic(9), e1000_check_for_link(9), e1000_get_speed_and_duplex(9), e1000_wait_autoneg(9)
• e1000_raise_mdi_clk(9), e1000_lower_mdi_clk(9), e1000_shift_out_mdi_bits(9), e1000_shift_in_mdi_bits(9), e1000_read_phy_reg(9), e1000_write_phy_reg(9), e1000_phy_hw_reset(9), e1000_phy_reset(9), e1000_detect_gig_phy(9), e1000_phy_reset_dsp(9), e1000_phy_igp_get_info(9), e1000_phy_m88_get_info(9), e1000_phy_get_info(9)
• e1000_init_eeprom_params(9), e1000_raise_ee_clk(9), e1000_lower_ee_clk(9), e1000_shift_out_ee_bits(9), e1000_shift_in_ee_bits(9), e1000_acquire_eeprom(9), e1000_standby_eeprom(9), e1000_release_eeprom(9), e1000_spi_eeprom_ready(9), e1000_read_eeprom(9), e1000_validate_eeprom_checksum(9), e1000_update_eeprom_checksum(9), e1000_write_eeprom(9), e1000_write_eeprom_spi(9), e1000_write_eeprom_microwire(9)
• e1000_read_mac_addr(9), e1000_init_rx_addrs(9), e1000_hash_mc_addr(9), e1000_rar_set(9), e1000_write_vfta(9), e1000_clear_vfta(9)
• e1000_setup_led(9), e1000_cleanup_led(9), e1000_led_on(9), e1000_led_off(9), e1000_clear_hw_cntrs(9), e1000_reset_adaptive(9), e1000_update_adaptive(9), e1000_get_bus_info(9), e1000_write_reg_io(9)
• e1000_get_cable_length(9), e1000_check_polarity(9), e1000_check_downshift(9), e1000_config_dsp_after_link_change(9), e1000_set_phy_mode(9), e1000_set_d3_lplu_state(9), e1000_set_vco_speed(9), e1000_enable_mng_pass_thru(9), e1000_get_auto_rd_done(9)

that's the whole group chat, nobody left on read 💜

---

quick vibe check bestie: this page came out of the Kernel API Manual with the source/version line reading ./drivers/net/ethernet/intel/e... and dated October 2026, and the footer still signs off as e1000_get_phy_cfg_done(9). so if you're citing her, cite her right 🎀✨

okay bye, go check your PHY config, ily, slay 💅🦋🌸