e1000_copper_link_igp_setup(9)

💅 e1000_copper_link_igp_setup(9) — like, the whole Kernel API Manual ✨

okay so bestie, buckle up 🎀 this one's a kernel API manual page (yes, from that manual, the Kernel API Manual one, iykyk) and it's about getting a copper ethernet link up on the e1000_phy_igp series of PHYs. lowkey iconic hardware behavior. let's get into it 💖

---

✨ NAME ✨

e1000_copper_link_igp_setup — Copper link setup for e1000_phy_igp series. that's it, that's the whole vibe 💅

---

🌸 SYNOPSIS 🌸

s32 e1000_copper_link_igp_setup (struct e1000_hw *hw );

it takes a pointer and returns an s32, periodt. ⭐

---

🦋 ARGUMENTS 🦋

• hw — Struct containing variables accessed by shared code. literally the shared-code brain cell for the whole driver, she holds all the state 🧚

---

💜 SEE ALSO 💜

so many siblings, she's got main character energy and a huge family 🌈 also, the kernel file lives at ./drivers/net/ethernet/intel/e1000/e1000_hw.c, if you wanna go peek 🫶

• e1000_set_phy_type(9)
• e1000_phy_init_script(9)
• e1000_set_mac_type(9)
• e1000_set_media_type(9)
• e1000_reset_hw(9)
• e1000_init_hw(9)
• e1000_adjust_serdes_amplitude(9)
• e1000_setup_link(9)
• e1000_setup_fiber_serdes_link(9)
• e1000_copper_link_rtl_setup(9)
• e1000_copper_link_preconfig(9)
• e1000_copper_link_mgp_setup(9)
• e1000_copper_link_autoneg(9)
• e1000_copper_link_postconfig(9)
• e1000_setup_copper_link(9)
• e1000_phy_setup_autoneg(9)
• e1000_phy_force_speed_duplex(9)
• e1000_config_collision_dist(9)
• e1000_config_mac_to_phy(9)
• e1000_force_mac_fc(9)
• e1000_config_fc_after_link_up(9)
• e1000_check_for_serdes_link_generic(9)
• e1000_check_for_link(9)
• e1000_get_speed_and_duplex(9)
• e1000_wait_autoneg(9)
• e1000_raise_mdi_clk(9)
• e1000_lower_mdi_clk(9)
• e1000_shift_out_mdi_bits(9)
• e1000_shift_in_mdi_bits(9)
• e1000_read_phy_reg(9)
• e1000_write_phy_reg(9)
• e1000_phy_hw_reset(9)
• e1000_phy_reset(9)
• e1000_detect_gig_phy(9)
• e1000_phy_reset_dsp(9)
• e1000_phy_igp_get_info(9)
• e1000_phy_m88_get_info(9)
• e1000_phy_get_info(9)
• e1000_init_eeprom_params(9)
• e1000_raise_ee_clk(9)
• e1000_lower_ee_clk(9)
• e1000_shift_out_ee_bits(9)
• e1000_shift_in_ee_bits(9)
• e1000_acquire_eeprom(9)
• e1000_standby_eeprom(9)
• e1000_release_eeprom(9)
• e1000_spi_eeprom_ready(9)
• e1000_read_eeprom(9)
• e1000_validate_eeprom_checksum(9)
• e1000_update_eeprom_checksum(9)
• e1000_write_eeprom(9)
• e1000_write_eeprom_spi(9)
• e1000_write_eeprom_microwire(9)
• e1000_read_mac_addr(9)
• e1000_init_rx_addrs(9)
• e1000_hash_mc_addr(9)
• e1000_rar_set(9)
• e1000_write_vfta(9)
• e1000_clear_vfta(9)
• e1000_setup_led(9)
• e1000_cleanup_led(9)
• e1000_led_on(9)
• e1000_led_off(9)
• e1000_clear_hw_cntrs(9)
• e1000_reset_adaptive(9)
• e1000_update_adaptive(9)
• e1000_get_bus_info(9)
• e1000_write_reg_io(9)
• e1000_get_cable_length(9)
• e1000_check_polarity(9)
• e1000_check_downshift(9)
• e1000_config_dsp_after_link_change(9)
• e1000_set_phy_mode(9)
• e1000_set_d3_lplu_state(9)
• e1000_set_vco_speed(9)
• e1000_enable_mng_pass_thru(9)
• e1000_get_auto_rd_done(9)
• e1000_get_phy_cfg_done(9)

---

ngl bestie, this page is short and sweet — a NAME, a SYNOPSIS, one ARGUMENT, and the longest SEE ALSO list you've ever seen in your life 😭 that's the whole thing, no cap 🔥

🦋 okay that's the page!! source/version footer time: this one's tagged ./drivers/net/ethernet/intel/e... and dated October 2026 — so mark your calendar, she's from the future, iconic behavior honestly 👑💖