section 9 · Kernel routines 🧠

87928 pages · page 81 of 440

all 9 (85608)9freebsd (2304)9lua (4)9p (12)

D (continued)

doc_ecc_bch_fix_data(9)Fix if need be read data from flash✨
doc_ecc_disable(9)Disable Hamming and BCH ECC hardware calculator✨
doc_erase(9)Erase a portion of the chip✨
doc_erase_block(9)Erase a couple of blocks✨
doc_fill_autooob(9)Fill a 16 bytes OOB from 8 non-ECC bytes✨
doc_get_bch_hw_ecc(9)Get hardware calculated BCH ECC✨
doc_get_erase_count(9)Get block erase count✨
doc_get_op_status(9)get erase/write operation status✨
doc_guess_autoecc(9)Guess autoecc mode from mbd_oob_ops✨
doc_hamming_ecc_init(9)Initialize hardware Hamming ECC engine✨
doc_page_finish(9)Ends reading/writing of a flash page✨
doc_probe_device(9)Check if a device is available✨
doc_read_data_area(9)Read data from data area✨
doc_read_oob(9)Read out of band bytes from flash✨
doc_read_page_ecc_init(9)Initialize hardware ECC engine✨
doc_read_page_finish(9)Ends reading of a flash page✨
doc_read_page_getbytes(9)Reads bytes from a prepared page✨
doc_read_page_prepare(9)Prepares reading data from a flash page✨
doc_read_seek(9)Set both flash planes to the specified block, page for reading✨
doc_release_device(9)Release a docg3 floor✨
doc_set_asic_mode(9)Set the ASIC mode✨
doc_set_device_id(9)Sets the devices id for cascaded G3 chips✨
doc_set_driver_info(9)Fill the mtd_info structure and docg3 structure✨
doc_set_extra_page_mode(9)Change flash page layout✨
doc_set_reliable_mode(9)Sets the flash to normal or reliable data mode✨
doc_setup_addr_sector(9)Setup blocks/page/ofs address for one plane✨
doc_setup_writeaddr_sector(9)Setup blocks/page/ofs address for one plane✨
doc_write_data_area(9)Write data into data area✨
doc_write_erase_wait_status(9)wait for write or erase completion✨
doc_write_oob(9)Write out of band bytes to flash✨
doc_write_page(9)Write a single page to the chip✨
doc_write_page_ecc_init(9)Initialize hardware BCH ECC engine✨
doc_write_page_putbytes(9)Writes bytes into a prepared page✨
doc_write_seek(9)Set both flash planes to the specified block, page for writing✨
docg3_probe(9)Probe the IO space for a DiskOnChip G3 chip✨
docg3_release(9)Release the driver✨
docg3_resume(9)Awakens docg3 floor✨
docg3_suspend(9)Put in low power mode the docg3 floor✨
dock_in_progress(9)see if we are in the middle of handling a dock event✨
dock_notify(9)Handle ACPI dock notification.✨
dock_present(9)see if the dock station is present.✨
dofileread(9)high-level file operations✨
dohooks(9)run all hooks in a list✨
domain(9)programming interface for kernel socket implementation✨
domain(9freebsd)network domain management✨
domain_add(9)programming interface for kernel socket implementation✨
domain_add(9freebsd)network domain management✨
domain_dirty_limits(9)calculate thresh and bg_thresh for a wb_domain✨
domain_is_scoped(9)Check if an interaction from a client/sender to a server/receiver should be restricted based on scope controls.✨
domain_scope_le(9)Checks domain ordering for scoped ptrace✨
DOMAIN_SET(9freebsd)network domain management✨
domain_setup_l3_mon_state(9)Initialise domain monitoring structures.✨
domainset(9)domainset functions and operation✨
domainset(9freebsd)domainset functions and operation✨
done_already(9)determine if a reference has been done already.✨
done_seqretry(9)end seqlock_t "locking or lockless" reader section✨
done_seqretry_irqrestore(9)end a seqlock_t lockless reader, or a non- interruptible locking reader section✨
dopowerhooks(9)run all power hooks✨
doshutdownhooks(9)run all shutdown hooks✨
dostartuphooks(9)run all startup hooks✨
down(9)acquire the semaphore✨
down_interruptible(9)acquire the semaphore unless interrupted✨
down_killable(9)acquire the semaphore unless killed✨
down_timeout(9)acquire the semaphore within a specified time✨
down_trylock(9)try to acquire the semaphore, without waiting✨
dp cec helpers(9)✨
dp dual mode helpers(9)✨
dp helpers(9)✨
dp mst helper(9)✨
dp83td510_cable_test_get_alcd_status(9)Get the status of the ALCD test for the DP83TD510 PHY.✨
dp83td510_cable_test_get_status(9)Get the status of the cable test for the DP83TD510 PHY.✨
dp83td510_cable_test_get_tdr_status(9)Get the status of the TDR test for the DP83TD510 PHY.✨
dp83td510_cable_test_start(9)Start the cable test for the DP83TD510 PHY.✨
dp83td510_update_stats(9)Update the PHY statistics for the DP83TD510 PHY.✨
dp83tg720_cable_test_get_status(9)Get the status of the cable test for the DP83TG720 PHY.✨
dp83tg720_cable_test_start(9)Start the cable test for the DP83TG720 PHY.✨
dp83tg720_get_next_update_time(9)Return next polling interval for PHY state✨
dp83tg720_update_stats(9)Update the PHY statistics for the DP83TD510 PHY.✨
dp_aux_ep_dev_release(9)Free memory for the dp_aux_ep device✨
dp_aux_ep_match(9)The match function for the dp_aux_bus.✨
dp_aux_ep_probe(9)The probe function for the dp_aux_bus.✨
dp_aux_ep_remove(9)The remove function for the dp_aux_bus.✨
dp_aux_ep_shutdown(9)The shutdown function for the dp_aux_bus.✨
DPAA2 FD - Frame Descriptor APIs for DPAA2(9)✨
dpaa2_caam_enqueue(9)enqueue a crypto request✨
dpaa2_cscn_state_congested(9)Check congestion state✨
dpaa2_dq_byte_count(9)Get the byte count in dequeue response✨
dpaa2_dq_fd(9)Get the frame descriptor in dequeue response✨
dpaa2_dq_flags(9)Get the stat field of dequeue response✨
dpaa2_dq_fqid(9)Get the fqid in dequeue response✨
dpaa2_dq_frame_count(9)Get the frame count in dequeue response✨
dpaa2_dq_is_pull(9)Check whether the dq response is from a pull command.✨
dpaa2_dq_is_pull_complete(9)Check whether the pull command is completed.✨
dpaa2_dq_odpid(9)Get the odpid field in dequeue response✨
dpaa2_dq_seqnum(9)Get the seqnum field in dequeue response✨
dpaa2_fd_get_addr(9)get the addr field of frame descriptor✨
dpaa2_fd_get_bpid(9)Get the bpid field in the frame descriptor✨
dpaa2_fd_get_ctrl(9)Get the control bits in the frame descriptor✨
dpaa2_fd_get_flc(9)Get the flow context in the frame descriptor✨
dpaa2_fd_get_format(9)Get the format field in the frame descriptor✨
dpaa2_fd_get_frc(9)Get the frame context in the frame descriptor✨
dpaa2_fd_get_len(9)Get the length in the frame descriptor✨
dpaa2_fd_get_offset(9)Get the offset field in the frame descriptor✨
dpaa2_fd_set_addr(9)Set the addr field of frame descriptor✨
dpaa2_fd_set_bpid(9)Set the bpid field of frame descriptor✨
dpaa2_fd_set_ctrl(9)Set the control bits in the frame descriptor✨
dpaa2_fd_set_flc(9)Set the flow context field of frame descriptor✨
dpaa2_fd_set_format(9)Set the format field of frame descriptor✨
dpaa2_fd_set_frc(9)Set the frame context in the frame descriptor✨
dpaa2_fd_set_len(9)Set the length field of frame descriptor✨
dpaa2_fd_set_offset(9)Set the offset field of frame descriptor✨
dpaa2_fl_get_addr(9)get the addr field of FLE✨
dpaa2_fl_get_bpid(9)Get the bpid field in the FLE✨
dpaa2_fl_get_ctrl(9)Get the control bits in the FLE✨
dpaa2_fl_get_flc(9)Get the flow context in the FLE✨
dpaa2_fl_get_format(9)Get the format field in the FLE✨
dpaa2_fl_get_frc(9)Get the frame context in the FLE✨
dpaa2_fl_get_len(9)Get the length in the FLE✨
dpaa2_fl_get_offset(9)Get the offset field in the frame list entry✨
dpaa2_fl_is_final(9)Check final bit in FLE✨
dpaa2_fl_set_addr(9)Set the addr field of FLE✨
dpaa2_fl_set_bpid(9)Set the bpid field of FLE✨
dpaa2_fl_set_ctrl(9)Set the control bits in the FLE✨
dpaa2_fl_set_final(9)Set the final bit in FLE✨
dpaa2_fl_set_flc(9)Set the flow context field of FLE✨
dpaa2_fl_set_format(9)Set the format field of FLE✨
dpaa2_fl_set_frc(9)Set the frame context in the FLE✨
dpaa2_fl_set_len(9)Set the length field of FLE✨
dpaa2_fl_set_offset(9)Set the offset field of FLE✨
dpaa2_io_create(9)create a dpaa2_io object.✨
dpaa2_io_down(9)release the dpaa2_io object.✨
dpaa2_io_get_adaptive_coalescing(9)Query adaptive coalescing state✨
dpaa2_io_get_cpu(9)get the cpu associated with a given DPIO object✨
dpaa2_io_get_irq_coalescing(9)Get the current IRQ coalescing parameters✨
dpaa2_io_irq(9)ISR for DPIO interrupts✨
dpaa2_io_query_bp_count(9)Query the number of buffers currently in a buffer pool.✨
dpaa2_io_query_fq_count(9)Get the frame and byte count for a given fq.✨
dpaa2_io_service_acquire(9)Acquire buffers from a buffer pool.✨
dpaa2_io_service_deregister(9)The opposite of 'register'.✨
dpaa2_io_service_enqueue_fq(9)Enqueue a frame to a frame queue.✨
dpaa2_io_service_enqueue_multiple_desc_fq(9)Enqueue multiple frames to different frame queue using a list of fqids.✨
dpaa2_io_service_enqueue_multiple_fq(9)Enqueue multiple frames to a frame queue using one fqid.✨
dpaa2_io_service_enqueue_qd(9)Enqueue a frame to a QD.✨
dpaa2_io_service_pull_channel(9)pull dequeue functions from a channel.✨
dpaa2_io_service_pull_fq(9)pull dequeue functions from a fq.✨
dpaa2_io_service_rearm(9)Rearm the notification for the given DPIO service.✨
dpaa2_io_service_register(9)Prepare for servicing of FQDAN or CDAN notifications on the given DPIO service.✨
dpaa2_io_service_release(9)Release buffers to a buffer pool.✨
dpaa2_io_service_select(9)return a dpaa2_io service affined to this cpu✨
dpaa2_io_set_adaptive_coalescing(9)Enable/disable adaptive coalescing✨
dpaa2_io_set_irq_coalescing(9)Set new IRQ coalescing values✨
dpaa2_io_store_create(9)Create the dma memory storage for dequeue result.✨
dpaa2_io_store_destroy(9)Frees the dma memory storage for dequeue result.✨
dpaa2_io_store_next(9)Determine when the next dequeue result is available.✨
dpaa2_io_update_net_dim(9)Update Net DIM✨
dpaa2_sg_get_addr(9)Get the address from SG entry✨
dpaa2_sg_get_bpid(9)Get the buffer pool id in SG entry✨
dpaa2_sg_get_format(9)Get the SG format in SG entry✨
dpaa2_sg_get_len(9)Get the length in SG entry✨
dpaa2_sg_get_offset(9)Get the offset in SG entry✨
dpaa2_sg_is_final(9)Check final bit in SG entry✨
dpaa2_sg_set_addr(9)Set the address in SG entry✨
dpaa2_sg_set_bpid(9)Set the buffer pool id in SG entry✨
dpaa2_sg_set_final(9)Set the final bit in SG entry✨
dpaa2_sg_set_format(9)Set the SG format in SG entry✨
dpaa2_sg_set_len(9)Set the length in SG entry✨
dpaa2_sg_set_offset(9)Set the offset in SG entry✨
dpbp_close(9)Close the control session of the object✨
dpbp_disable(9)Disable the DPBP.✨
dpbp_enable(9)Enable the DPBP.✨
dpbp_get_attributes(9)Retrieve DPBP attributes.✨
dpbp_open(9)Open a control session for the specified object.✨
dpbp_reset(9)Reset the DPBP, returns the object to initial state.✨
dpc_tlp_log_len(9)Calculate DPC RP PIO TLP Header/Prefix Log length✨
dpcon_close(9)Close the control session of the object✨
dpcon_disable(9)Disable the DPCON✨
dpcon_enable(9)Enable the DPCON✨
dpcon_get_attributes(9)Retrieve DPCON attributes.✨
dpcon_open(9)Open a control session for the specified object✨
dpcon_reset(9)Reset the DPCON, returns the object to initial state.✨
dpcon_set_notification(9)Set DPCON notification destination✨
dpcpu(9)Kernel Dynamic Per-CPU Memory Allocator✨
dpcpu(9freebsd)Kernel Dynamic Per-CPU Memory Allocator✨
DPCPU_DECLARE(9)Kernel Dynamic Per-CPU Memory Allocator✨
DPCPU_DEFINE(9)Kernel Dynamic Per-CPU Memory Allocator✨
DPCPU_DEFINE_STATIC(9)Kernel Dynamic Per-CPU Memory Allocator✨
DPCPU_GET(9)Kernel Dynamic Per-CPU Memory Allocator✨
DPCPU_ID_GET(9)Kernel Dynamic Per-CPU Memory Allocator✨
DPCPU_ID_PTR(9)Kernel Dynamic Per-CPU Memory Allocator✨
DPCPU_ID_SET(9)Kernel Dynamic Per-CPU Memory Allocator✨
DPCPU_PTR(9)Kernel Dynamic Per-CPU Memory Allocator✨
DPCPU_SET(9)Kernel Dynamic Per-CPU Memory Allocator✨
dpdmai_close(9)Close the control session of the object✨
dpdmai_destroy(9)Destroy the DPDMAI object and release all its resources.✨
dpdmai_disable(9)Disable the DPDMAI, stop sending and receiving frames.✨
dpdmai_enable(9)Enable the DPDMAI, allow sending and receiving frames.✨
dpdmai_get_attributes(9)Retrieve DPDMAI attributes.✨
dpdmai_get_rx_queue(9)Retrieve Rx queue attributes.✨
dpdmai_get_tx_queue(9)Retrieve Tx queue attributes.✨
dpdmai_open(9)Open a control session for the specified object✨