section 9 · Kernel routines 🧠

P (continued)

• parameq(9)checks if two parameter names match✨
• parameqn(9)checks if two parameter names match✨
• params_access(9)get the access type from the hw params✨
• params_buffer_bytes(9)Get the buffer size (in bytes) from the hw params✨
• params_buffer_size(9)Get the buffer size (in frames) from the hw params✨
• params_channels(9)Get the number of channels from the hw params✨
• params_format(9)get the sample format from the hw params✨
• params_period_bytes(9)get the period size (in bytes) from the hw params✨
• params_period_size(9)Get the period size (in frames) from the hw params✨
• params_periods(9)Get the number of periods from the hw params✨
• params_rate(9)Get the sample rate from the hw params✨
• params_subformat(9)get the sample subformat from the hw params✨
• params_width(9)get the number of bits of the sample format from the hw params✨
• paravirt_membar_sync(9)memory barrier for paravirtualized device drivers✨
• parent(9)given the offset of the child, find the offset of the parent.✨
• parent_allows_removal(9)verify if it's ok to remove an exception✨
• parent_len(9)find the length of the parent portion of a pathname✨
• parent_mem_cgroup(9)find the accounting parent of a memcg✨
• parent_misc(9)Get the parent of the passed misc cgroup.✨
• parisc_pdc_chassis_init(9)Called at boot time.✨
• parity8(9)get the parity of an u8 value✨
• parman_create(9)creates a new parman instance✨
• parman_destroy(9)destroys existing parman instance✨
• parman_item_add(9)adds a parman item under defined priority✨
• parman_item_remove(9)deletes parman item✨
• parman_prio_fini(9)finalizes use of parman priority chunk✨
• parman_prio_init(9)initializes a parman priority chunk✨
• parport_announce_port(9)tell device drivers about a parallel port✨
• parport_claim(9)claim access to a parallel port device✨
• parport_claim_or_block(9)claim access to a parallel port device✨
• parport_close(9)close a device opened with parport_open()✨
• parport_find_base(9)find a parallel port by base address✨
• parport_find_number(9)find a parallel port by number✨
• parport_get_port(9)increment a port's reference count✨
• parport_ip32_clear_epp_timeout(9)clear Timeout bit in EPP mode✨
• parport_ip32_compat_write_data(9)write a block of data in SPP mode✨
• parport_ip32_data_forward(9)enable host-to-peripheral communications✨
• parport_ip32_data_reverse(9)enable peripheral-to-host communications✨
• parport_ip32_disable_irq(9)disable interrupts on the rising edge of nACK✨
• parport_ip32_dma_get_residue(9)get residue from last DMA transfer✨
• parport_ip32_dma_interrupt(9)DMA interrupt handler✨
• parport_ip32_dma_register(9)initialize DMA engine✨
• parport_ip32_dma_setup_context(9)setup next DMA context✨
• parport_ip32_dma_start(9)begins a DMA transfer✨
• parport_ip32_dma_stop(9)ends a running DMA transfer✨
• parport_ip32_dma_unregister(9)release and free resources for DMA engine✨
• parport_ip32_drain_fifo(9)wait for FIFO to empty✨
• parport_ip32_ecp_supported(9)check for an ECP port✨
• parport_ip32_ecp_write_data(9)write a block of data in ECP mode✨
• parport_ip32_enable_irq(9)enable interrupts on the rising edge of nACK✨
• parport_ip32_epp_read(9)generic EPP read function✨
• parport_ip32_epp_read_addr(9)read a block of addresses in EPP mode✨
• parport_ip32_epp_read_data(9)read a block of data in EPP mode✨
• parport_ip32_epp_write(9)generic EPP write function✨
• parport_ip32_epp_write_addr(9)write a block of addresses in EPP mode✨
• parport_ip32_epp_write_data(9)write a block of data in EPP mode✨
• parport_ip32_exit(9)module termination function✨
• parport_ip32_fifo_supported(9)check for FIFO parameters✨
• parport_ip32_fifo_wait_break(9)check if the waiting function should return✨
• parport_ip32_fifo_write_block(9)write a block of data✨
• parport_ip32_fifo_write_block_dma(9)write a block of data (DMA mode)✨
• parport_ip32_fifo_write_block_pio(9)write a block of data (PIO mode)✨
• parport_ip32_frob_control(9)change bits from the DCR register✨
• parport_ip32_frob_econtrol(9)change bits from the ECR register✨
• parport_ip32_fwp_wait_interrupt(9)wait for FIFO to empty (interrupt- driven)✨
• parport_ip32_fwp_wait_polling(9)wait for FIFO to empty (polling)✨
• parport_ip32_get_fifo_residue(9)reset FIFO✨
• parport_ip32_init(9)module initialization function✨
• parport_ip32_init_state(9)for core parport code✨
• parport_ip32_interrupt(9)interrupt handler✨
• parport_ip32_make_isa_registers(9)compute (ISA) register addresses✨
• parport_ip32_probe_port(9)probe and register IP32 built-in parallel port✨
• parport_ip32_read_control(9)return cached contents of the DCR register✨
• parport_ip32_read_data(9)return current contents of the DATA register✨
• parport_ip32_read_econtrol(9)read contents of the ECR register✨
• parport_ip32_read_status(9)return current contents of the DSR register✨
• parport_ip32_restore_state(9)for core parport code✨
• parport_ip32_save_state(9)for core parport code✨
• parport_ip32_set_mode(9)change mode of ECP port✨
• parport_ip32_unregister_port(9)unregister a parallel port✨
• parport_ip32_wakeup(9)wakes up code waiting for an interrupt✨
• parport_ip32_write_control(9)set new contents for the DCR register✨
• parport_ip32_write_data(9)set new contents for the DATA register✨
• parport_ip32_write_econtrol(9)write new contents to the ECR register✨
• parport_negotiate(9)negotiate an IEEE 1284 mode✨
• parport_open(9)find a device by canonical device number✨
• parport_poll_peripheral(9)poll status lines✨
• parport_put_port(9)decrement a port's reference count✨
• parport_read(9)read a block of data from a parallel port✨
• parport_register_dev_model(9)register a device on a parallel port✨
• parport_register_driver(9)register a parallel port device driver✨
• parport_register_port(9)register a parallel port✨
• parport_release(9)give up access to a parallel port device✨
• parport_remove_port(9)deregister a parallel port✨
• parport_set_timeout(9)set the inactivity timeout for a device✨
• parport_unregister_device(9)deregister a device on a parallel port✨
• parport_unregister_driver(9)deregister a parallel port device driver✨
• parport_wait_event(9)wait for an event on a parallel port✨
• parport_wait_peripheral(9)wait for status lines to change in 35ms✨
• parport_write(9)write a block of data to a parallel port✨
• parport_yield(9)relinquish a parallel port temporarily✨
• parport_yield_blocking(9)relinquish a parallel port temporarily✨
• parse_action(9)Parse the action type given a token string.✨
• parse_aliases(9)search names for entries beginning or equalling str ignoring case. If mutliple entries in names match str then the longest is chosen.✨
• parse_bool(9)Parse a two-valued option into a bool.✨
• parse_capability(9)convert device capabilities to NIC capabilities✨
• parse_cidxtid(9)parse @cidxtid field✨
• parse_delay_str(9)parse an unsigned decimal integer delay✨
• parse_device_config(9)Convert the dmsetup table into a struct device_config.✨
• parse_dmar_table(9)parses the DMA reporting table✨
• parse_efi_signature_list(9)Parse an EFI signature list for certificates✨
• parse_events__decode_legacy_cache(9)Search name for the legacy cache event name composed of 1, 2 or 3 hyphen separated sections. The first section is the cache type while the others are the optional op and optional result. To make…✨
• parse_events__filter_pmu(9)returns false if a wildcard PMU should be considered, true if it should be filtered.✨
• parse_feature(9)parse a feature on given device feature list✨
• parse_fw_cfg(9)Parse firmware pinconf parameters✨
• parse_header(9)Parse policy header information.✨
• parse_hex_sentence(9)Convert a ascii hex representation into byte array.✨
• parse_hwmon_filename(9)Parse filename into constituent parts.✨
• parse_ids(9)Build the event string for the ids and parse them creating an evlist. The encoded metric_ids are decoded.✨
• parse_int_array_user(9)Split string into a sequence of integers✨
• parse_key_value_pairs(9)Parse all key/value pairs from a list of arguments.✨
• parse_lease_state(9)parse lease context contained in file open request✨
• parse_memory(9)Parse a string into an index memory value.✨
• parse_message(9)parses a single message from the rx slot✨
• parse_mpp_data(9)✨
• parse_mpp_x_data(9)✨
• parse_msg(9)Print some information and call the notifiers on an RX message✨
• parse_mtd_partitions(9)parse and register MTD partitions✨
• parse_next_property(9)process the next property from raw input buffer✨
• parse_OID(9)Parse an OID from a bytestream✨
• parse_one_key_value_pair(9)Parse one key/value pair and update the configuration data structure.✨
• parse_one_thread_config_spec(9)Parse one component of a thread parameter configuration string and update the configuration data structure.✨
• parse_operation(9)Parse the operation type given a token string.✨
• parse_option_str(9)Parse a string and check an option is set or not✨
• parse_optional_arguments(9)Parse the configuration string passed in for optional arguments.✨
• parse_package(9)parse acpi package for retrieving SAR information✨
• parse_pcc_subspace(9)Count PCC subspaces defined✨
• parse_prop_cells(9)Property parsing function for suppliers✨
• parse_property(9)Parse a rule property given a token string.✨
• parse_protocol_change(9)parses a protocol change request✨
• parse_rule(9)parse a policy rule line.✨
• parse_slab_size(9)Parse a string option into a slab size value.✨
• parse_suffix_prop_cells(9)Suffix property parsing function for suppliers✨
• parse_tag_11_packet(9)✨
• parse_tag_1_packet(9)✨
• parse_tag_3_packet(9)✨
• parse_test_vector(9)parse a single test vector string✨
• parse_thread_config_string(9)Parse the configuration string passed and update the specified counts and other parameters of various types of threads to be created.✨
• parse_timing_property(9)parse timing_entry from device_node✨
• parse_tree_node(9)returns a device entry in the iotree✨
• parse_version(9)Parse policy version.✨
• parse_vlan_tag(9)Parse vlan tag from vlan header.✨
• Partial backup and restoration of a struct ttm_tt.(9)✨
• Partial Unmapping of Ranges(9)✨
• partial_decompress(9)decompresses part or all of a compressed buffer✨
• partition_cpus_change(9)Handle partition state changes due to CPU mask updates✨
• partition_is_populated(9)check if partition has tasks✨
• partition_mem(9)partition memory and configure TP memory settings✨
• partition_mode (int)(9)✨
• pat_bp_init(9)Initialize the PAT MSR value and PAT table✨
• pat_pfn_immune_to_uc_mtrr(9)Check whether the PAT memory type of @pfn cannot be overridden by UC MTRR memory type.✨
• path_connected(9)Verify that a dentry is below mnt.mnt_root✨
• path_from_stashed(9)create path from stashed or new dentry✨
• path_get(9)get a reference to a path✨
• path_has_submounts(9)check for mounts over a dentry in the current namespace.✨
• path_is_mountpoint(9)Check if path is a mount in the current namespace.✨
• path_mounted(9)check whether path is mounted✨
• path_overmounted(9)check if path is overmounted✨
• path_put(9)put a reference to a path✨
• pathbuf(9)path buffer abstraction✨
• pathmask_to_pos(9)find the position of the left-most bit in a pathmask✨
• pause(9)wait for events✨
• pause(9freebsd)wait for events✨
• pause_named_trigger(9)Pause all named triggers with the same name✨
• pause_sbt(9)wait for events✨
• pause_sbt(9freebsd)wait for events✨
• pause_sig(9)wait for events✨
• pause_sig(9freebsd)wait for events✨
• PBUF(9)Initialize .pbuf and .pbuf_size✨
• pbuf(9freebsd)functions for managing physical buffers✨
• pbus_select_window(9)Select bridge window for a resource✨
• pbus_select_window_for_type(9)Select bridge window for a resource type✨
• pbus_size_io(9)Size the I/O window of a given bus✨
• pbus_size_mem(9)Size the memory window of a given bus✨
• pc87413_exit(9)module's "destructor"✨
• pc87413_init(9)module's "constructor"✨
• pc87413_ioctl(9)✨
• pc87413_notify_sys(9)✨
• pc87413_open(9)✨
• pc87413_release(9)✨
• pc87413_status(9)✨
• pc87413_write(9)✨
• pcache_cache_flush(9)Flush all ksets to persist any pending cache data✨
• PCBGROUP(9freebsd)Distributed Protocol Control Block Groups✨
• pcc_data_alloc(9)Allocate the pcc_data memory for pcc subspace✨
• pcc_map_interrupt(9)Map a PCC subspace GSI to a linux IRQ number✨
• pcc_mbox_free_channel(9)Clients call this to free their Channel.✨
• pcc_mbox_irq(9)PCC mailbox interrupt handler✨
• pcc_mbox_probe(9)Called when we find a match for the PCCT platform device. This is purely used to represent the PCCT as a virtual device for registering with the generic Mailbox framework.✨
• pcc_mbox_request_channel(9)PCC clients call this function to request a pointer to their PCC subspace, from which they can get the details of communicating with the remote.✨