section 9 · Kernel routines 🧠

87928 pages · page 184 of 440

all 9 (85608)9freebsd (2304)9lua (4)9p (12)

I (continued)

ipr_free_ucode_buffer(9)Frees a microcode download buffer✨
ipr_gen_sense(9)Generate SCSI sense data from an IOASA✨
ipr_get_autosense(9)Copy autosense data to sense buffer✨
ipr_get_chip_info(9)Find adapter chip information✨
ipr_get_error(9)Find the specfied IOASC in the ipr_error_table.✨
ipr_get_free_ipr_cmnd(9)Get a free IPR Cmnd block and initialize it✨
ipr_get_ioa_dump(9)Perform a dump of the driver and adapter.✨
ipr_get_ldump_data_section(9)Dump IOA memory✨
ipr_get_max_scsi_speed(9)Determine max SCSI speed for a given bus✨
ipr_get_mode_page(9)Locate specified mode page✨
ipr_get_sis64_dump_data_section(9)Dump IOA memory✨
ipr_get_unit_check_buffer(9)Get the unit check buffer from the IOA✨
ipr_halt(9)Issue shutdown prepare to all adapters✨
ipr_halt_done(9)Shutdown prepare completion✨
ipr_handle_config_change(9)Handle a config change from the adapter✨
ipr_handle_log_data(9)Log an adapter error.✨
ipr_handle_other_interrupt(9)Handle "other" interrupts✨
ipr_init(9)Module entry point✨
ipr_init_dump_entry_hdr(9)Initialize a dump entry header.✨
ipr_init_ioa_cfg(9)Initialize IOA config struct✨
ipr_init_ioa_mem(9)Initialize ioa_cfg control block✨
ipr_init_ioadl(9)initialize the ioadl for the correct SIS type✨
ipr_init_ipr_cmnd(9)Initialize an IPR Cmnd block✨
ipr_init_regs(9)Initialize IOA registers✨
ipr_init_res_entry(9)Initialize a resource entry struct.✨
ipr_init_res_table(9)Initialize the resource table✨
ipr_initialize_bus_attr(9)Initialize SCSI bus attributes to default values✨
ipr_initiate_ioa_bringdown(9)Bring down an adapter✨
ipr_initiate_ioa_reset(9)Initiate an adapter reset✨
ipr_inquiry_page_supported(9)Is the given inquiry page supported✨
ipr_internal_cmd_done(9)Op done function for an internally generated op.✨
ipr_ioa_bringdown_done(9)IOA bring down completion.✨
ipr_ioa_info(9)Get information about the card/driver✨
ipr_ioa_reset_done(9)IOA reset completion.✨
ipr_ioafp_cap_inquiry(9)Send a Page 0xD0 Inquiry to the adapter.✨
ipr_ioafp_identify_hrrq(9)Send Identify Host RRQ.✨
ipr_ioafp_inquiry(9)Send an Inquiry to the adapter.✨
ipr_ioafp_mode_select_page24(9)Issue Mode Select to IOA✨
ipr_ioafp_mode_select_page28(9)Issue Mode Select Page 28 to IOA✨
ipr_ioafp_mode_sense_page24(9)Issue Page 24 Mode Sense to IOA✨
ipr_ioafp_mode_sense_page28(9)Issue Mode Sense Page 28 to IOA✨
ipr_ioafp_page0_inquiry(9)Send a Page 0 Inquiry to the adapter.✨
ipr_ioafp_page3_inquiry(9)Send a Page 3 Inquiry to the adapter.✨
ipr_ioafp_pageC4_inquiry(9)Send a Page 0xC4 Inquiry to the adapter.✨
ipr_ioafp_query_ioa_cfg(9)Send a Query IOA Config to the adapter.✨
ipr_ioafp_set_caching_parameters(9)Issue Set Cache parameters service action✨
ipr_ioafp_std_inquiry(9)Send a Standard Inquiry to the adapter.✨
ipr_is_af_dasd_device(9)Determine if a resource is an AF DASD✨
ipr_is_device(9)Determine if the hostrcb structure is related to a device✨
ipr_is_gata(9)Determine if a resource is a generic ATA resource✨
ipr_is_gscsi(9)Determine if a resource is a generic scsi resource✨
ipr_is_ioa_resource(9)Determine if a resource is the IOA✨
ipr_is_naca_model(9)Determine if a resource is using NACA queueing model✨
ipr_is_same_device(9)Determine if two devices are the same.✨
ipr_is_scsi_disk(9)Determine if a resource is a SCSI disk✨
ipr_is_vset_device(9)Determine if a resource is a VSET✨
ipr_isr(9)Interrupt service routine✨
ipr_isr_eh(9)Interrupt service routine error handler✨
ipr_isr_mhrrq(9)Interrupt service routine✨
ipr_lock_and_done(9)Acquire lock and complete command✨
ipr_log64_fabric_path(9)Log a fabric path error✨
ipr_log64_path_elem(9)Log a fabric path element.✨
ipr_log_array_error(9)Log an array configuration error.✨
ipr_log_cache_error(9)Log a cache error.✨
ipr_log_config_error(9)Log a configuration error.✨
ipr_log_dual_ioa_error(9)Log a dual adapter error.✨
ipr_log_enhanced_array_error(9)Log an array configuration error.✨
ipr_log_enhanced_cache_error(9)Log a cache error.✨
ipr_log_enhanced_config_error(9)Log a configuration error.✨
ipr_log_enhanced_dual_ioa_error(9)Log an enhanced dual adapter error.✨
ipr_log_ext_vpd(9)Log the passed extended VPD to the error log.✨
ipr_log_ext_vpd_compact(9)Log the passed extended VPD compactly.✨
ipr_log_fabric_error(9)Log a fabric error.✨
ipr_log_fabric_path(9)Log a fabric path error✨
ipr_log_generic_error(9)Log an adapter error.✨
ipr_log_hex_data(9)Log additional hex IOA error data.✨
ipr_log_path_elem(9)Log a fabric path element.✨
ipr_log_sis64_array_error(9)Log a sis64 array error.✨
ipr_log_sis64_config_error(9)Log a device error.✨
ipr_log_sis64_device_error(9)Log a cache error.✨
ipr_log_sis64_fabric_error(9)Log a sis64 fabric error.✨
ipr_log_sis64_service_required_error(9)Log a sis64 service required error.✨
ipr_log_vpd(9)Log the passed VPD to the error log.✨
ipr_log_vpd_compact(9)Log the passed extended VPD compactly.✨
ipr_mask_and_clear_interrupts(9)Mask all and clear specified interrupts✨
ipr_match_lun(9)Match function for specified LUN✨
ipr_modify_ioafp_mode_page_28(9)Modify IOAFP Mode Page 28✨
ipr_oper_timeout(9)Adapter timed out transitioning to operational✨
ipr_pci_error_detected(9)Called when a PCI error is detected.✨
ipr_pci_frozen(9)Called when slot has experienced a PCI bus error.✨
ipr_pci_mmio_enabled(9)Called when MMIO has been re-enabled✨
ipr_pci_perm_failure(9)Called when PCI slot is dead for good.✨
ipr_pci_slot_reset(9)Called when PCI slot has been reset.✨
ipr_probe(9)Adapter hot plug add entry point✨
ipr_probe_ioa_part2(9)Initializes IOAs found in ipr_probe_ioa(..)✨
ipr_process_ccn(9)Op done function for a CCN.✨
ipr_process_error(9)Op done function for an adapter error log.✨
ipr_queuecommand(9)Queue a mid-layer request✨
ipr_read_dump(9)Dump the adapter✨
ipr_read_trace(9)Dump the adapter trace✨
ipr_reinit_ipr_cmnd(9)Re-initialize an IPR Cmnd block for reuse✨
ipr_reinit_ipr_cmnd_for_erp(9)Re-initialize a cmnd block to be used for ERP✨
ipr_release_dump(9)Free adapter dump memory✨
ipr_remove(9)IOA hot plug remove entry point✨
ipr_reset_alert(9)Alert the adapter of a pending reset✨
ipr_reset_allowed(9)Query whether or not IOA can be reset✨
ipr_reset_bist_done(9)BIST has completed on the adapter.✨
ipr_reset_block_config_access(9)Block config access to the IOA✨
ipr_reset_block_config_access_wait(9)Wait for permission to block config access✨
ipr_reset_cancel_hcam(9)Cancel outstanding HCAMs✨
ipr_reset_cancel_hcam_done(9)Check for outstanding commands✨
ipr_reset_cmd_failed(9)Handle failure of IOA reset command✨
ipr_reset_enable_ioa(9)Enable the IOA following a reset.✨
ipr_reset_freeze(9)Hold off all I/O activity✨
ipr_reset_get_unit_check_job(9)Call to get the unit check buffer.✨
ipr_reset_ioa_job(9)Adapter reset job✨
ipr_reset_mode_sense_failed(9)Handle failure of IOAFP mode sense✨
ipr_reset_mode_sense_page24_failed(9)Handle failure of IOAFP mode sense✨
ipr_reset_next_stage(9)Process IPL stage change based on feedback register.✨
ipr_reset_quiesce_done(9)Complete IOA disconnect✨
ipr_reset_reset_work(9)Pulse a PCIe fundamental reset✨
ipr_reset_restore_cfg_space(9)Restore PCI config space.✨
ipr_reset_shutdown_ioa(9)Shutdown the adapter✨
ipr_reset_slot_reset(9)Reset the PCI slot of the adapter.✨
ipr_reset_slot_reset_done(9)Clear PCI reset to the adapter✨
ipr_reset_start_bist(9)Run BIST on the adapter.✨
ipr_reset_start_timer(9)Start a timer for adapter reset job✨
ipr_reset_timer_done(9)Adapter reset timer function✨
ipr_reset_ucode_download(9)Download microcode to the adapter✨
ipr_reset_ucode_download_done(9)Microcode download completion✨
ipr_reset_wait_for_dump(9)Wait for a dump to timeout.✨
ipr_reset_wait_to_start_bist(9)Wait for permission to reset IOA.✨
ipr_save_pcix_cmd_reg(9)Save PCI-X command register✨
ipr_scan_finished(9)Report whether scan is done✨
ipr_scsi_bus_speed_limit(9)Limit the SCSI speed based on SES table✨
ipr_scsi_done(9)mid-layer done function✨
ipr_scsi_eh_done(9)mid-layer done function for aborted ops✨
ipr_sdev_configure(9)Configure a SCSI device✨
ipr_sdev_destroy(9)Unconfigure a SCSI device✨
ipr_sdev_init(9)Prepare for commands to a device.✨
ipr_sdt_copy(9)Copy Smart Dump Table to kernel buffer✨
ipr_sdt_is_fmt2(9)Determine if a SDT address is in format 2✨
ipr_send_blocking_cmd(9)Send command and sleep on its completion.✨
ipr_send_command(9)Send driver initiated requests.✨
ipr_send_hcam(9)Send an HCAM to the adapter.✨
ipr_set_affinity_nobalance(9)✨
ipr_set_pcix_cmd_reg(9)Setup PCI-X command register✨
ipr_set_sup_dev_dflt(9)Initialize a Set Supported Device buffer✨
ipr_set_supported_devs(9)Send Set Supported Devices for a device✨
ipr_show_adapter_handle(9)Show the adapter's resource handle for this device✨
ipr_show_adapter_state(9)Show the adapter's state✨
ipr_show_device_id(9)Show the device_id for this device.✨
ipr_show_fw_type(9)Show the adapter's firmware type.✨
ipr_show_fw_version(9)Show the firmware version✨
ipr_show_log_level(9)Show the adapter's error logging level✨
ipr_show_raw_mode(9)Show the adapter's raw mode✨
ipr_show_resource_path(9)Show the resource path or the resource address for this device.✨
ipr_show_resource_type(9)Show the resource type for this device.✨
ipr_shutdown(9)Shutdown handler.✨
ipr_store_adapter_state(9)Change adapter state✨
ipr_store_diagnostics(9)IOA Diagnostics interface✨
ipr_store_iopoll_weight(9)Change the adapter's polling mode✨
ipr_store_log_level(9)Change the adapter's error logging level✨
ipr_store_raw_mode(9)Change the adapter's raw mode✨
ipr_store_reset_adapter(9)Reset the adapter✨
ipr_store_update_fw(9)Update the firmware on the adapter✨
ipr_target_destroy(9)Destroy a SCSI target✨
ipr_test_intr(9)Handle the interrupt generated in ipr_test_msi().✨
ipr_test_msi(9)Test for Message Signaled Interrupt (MSI) support.✨
ipr_timeout(9)An internally generated op has timed out.✨
ipr_trc_hook(9)Add a trace entry to the driver trace✨
ipr_unit_check_no_data(9)Log a unit check/no data error log✨
ipr_update_ioa_ucode(9)Update IOA's microcode✨
ipr_update_res_entry(9)Update the resource entry.✨
ipr_wait_for_ops(9)Wait for matching commands to complete✨
ipr_wait_for_pci_err_recovery(9)Wait for any PCI error recovery to complete during probe time✨
ipr_wait_iodbg_ack(9)Wait for an IODEBUG ACK from the IOA✨
ipr_worker_thread(9)Worker thread✨
ipr_write_dump(9)Setup dump state of adapter✨
iproc_gpio_irq_set_mask(9)mask/unmask a GPIO interrupt✨
iproc_set_bit(9)set or clear one bit (corresponding to the GPIO pin) in a Iproc GPIO register✨
ips_adjust(9)adjust power clamp based on thermal state✨
ips_cpu_busy(9)is CPU busy?✨
ips_cpu_lower(9)lower CPU power clamp✨
ips_cpu_raise(9)raise CPU power clamp✨
ips_detect_cpu(9)detect whether CPU supports IPS✨
ips_disable_cpu_turbo(9)disable turbo mode on all CPUs✨
ips_disable_gpu_turbo(9)notify the gfx driver to disable turbo mode✨
ips_enable_cpu_turbo(9)enable turbo mode on all CPUs✨
ips_enable_gpu_turbo(9)notify the gfx driver turbo is available✨
ips_get_i915_syms(9)try to get GPU control methods from i915 driver✨
ips_gpu_busy(9)is GPU busy?✨
ips_gpu_lower(9)lower GPU power clamp✨
ips_gpu_raise(9)raise GPU power clamp✨
ips_irq_handler(9)handle temperature triggers and other IPS events✨
ips_monitor(9)temp/power monitoring thread✨
iptfs_alloc_skb(9)Allocate a new `skb`.✨
iptfs_complete_inner_skb(9)finish preparing the inner packet for gro recv.✨
iptfs_copy_create_frag(9)create an inner fragment skb.✨
iptfs_copy_create_frags(9)create and send N-1 fragments of a larger skb.✨