section 9 · Kernel routines 🧠

85608 pages · page 384 of 429

all 9 (85608)9freebsd (2304)9lua (4)9p (12)

T (continued)

touch_overlay_process_contact(9)process contacts according to the overlay mapping. This function acts as a filter to release the calling driver from the contacts that are either related to overlay buttons or out of the overlay…✨
touch_overlay_sync_frame(9)update the status of the segments and report buttons whose tracked slot is unused.✨
touch_pmd(9)Mark page table pmd entry as accessed and dirty (for write)✨
touch_softlockup_watchdog_sched(9)touch watchdog on scheduler stalls✨
touchscreen_parse_properties(9)parse common touchscreen properties✨
touchscreen_report_pos(9)Report touchscreen coordinates✨
touchscreen_set_mt_pos(9)Set input_mt_pos coordinates✨
tp(9)IEC TP timer - generate a high pulse of defined duration on rising edge✨
tp_set_timers(9)set TP timing parameters✨
tpacpi_check_quirks(9)search BIOS/EC version on a list✨
tpcomp(9)Trajectory Planning (tp) module skeleton✨
tpg110_get_modes(9)return the appropriate mode✨
tpid_to_vsi_outer_vlan_type(9)convert from TPID to VSI context based tag_type✨
tpm1_auto_startup(9)Perform the standard automatic TPM initialization sequence✨
tpm1_calc_ordinal_duration(9)calculate the maximum command duration✨
tpm1_continue_selftest(9)run TPM's selftest✨
tpm1_do_selftest(9)have the TPM continue its selftest and wait until it can receive further commands✨
tpm1_get_pcr_allocation(9)initialize the allocated bank✨
tpm1_get_random(9)get random bytes from the TPM's RNG✨
tpm1_pm_suspend(9)pm suspend handler✨
tpm1_startup(9)turn on the TPM✨
tpm2_auto_startup(9)Perform the standard automatic TPM initialization sequence✨
tpm2_buf_append_auth(9)append TPMS_AUTH_COMMAND to the buffer.✨
tpm2_calc_ordinal_duration(9)Calculate the maximum command duration✨
tpm2_create_primary(9)create a primary key using a fixed P-256 template✨
tpm2_do_selftest(9)ensure that all self tests have passed✨
tpm2_end_auth_session(9)kill the allocated auth session✨
tpm2_flush_context(9)execute a TPM2_FlushContext command✨
tpm2_get_random(9)get random bytes from the TPM RNG✨
tpm2_get_tpm_pt(9)get value of a TPM_CAP_TPM_PROPERTIES type property✨
tpm2_load_cmd(9)execute a TPM2_Load command✨
tpm2_parse_create_primary(9)parse the data returned from TPM_CC_CREATE_PRIMARY✨
tpm2_pcr_extend(9)extend a PCR value✨
tpm2_pcr_read(9)read a PCR value✨
tpm2_probe(9)probe for the TPM 2.0 protocol✨
tpm2_seal_trusted(9)seal the payload of a trusted key✨
tpm2_sessions_init(9)start of day initialization for the sessions code✨
tpm2_shutdown(9)send a TPM shutdown command✨
tpm2_start_auth_session(9)Create an a HMAC authentication session✨
tpm2_startup(9)turn on the TPM✨
tpm2_unseal_cmd(9)execute a TPM2_Unseal command✨
tpm2_unseal_trusted(9)unseal the payload of a trusted key✨
tpm_buf_append(9)Append data to an initialized buffer✨
tpm_buf_append_handle(9)Add a handle✨
tpm_buf_append_hmac_session(9)Append a TPM session element✨
tpm_buf_append_name(9)add a handle area to the buffer✨
tpm_buf_check_hmac_response(9)check the TPM return HMAC for correctness✨
tpm_buf_fill_hmac_session(9)finalize the session HMAC✨
tpm_buf_init(9)Initialize a TPM command✨
tpm_buf_init_sized(9)Initialize a sized buffer✨
tpm_buf_length(9)Return the number of bytes consumed by the data✨
tpm_buf_read(9)Read from a TPM buffer✨
tpm_buf_read_u16(9)Read 16-bit word from a TPM buffer✨
tpm_buf_read_u32(9)Read 32-bit word from a TPM buffer✨
tpm_buf_read_u8(9)Read 8-bit word from a TPM buffer✨
tpm_buf_reset(9)Re-initialize a TPM command✨
tpm_buf_reset_sized(9)Re-initialize a sized buffer✨
tpm_calc_ordinal_duration(9)calculate the maximum command duration✨
tpm_chip_alloc(9)allocate a new struct tpm_chip instance✨
tpm_chip_start(9)power on the TPM✨
tpm_chip_stop(9)power off the TPM✨
tpm_class_shutdown(9)prepare the TPM device for loss of power.✨
tpm_cr50_check_locality(9)Verify if required TPM locality is active.✨
tpm_cr50_i2c_disable_tpm_irq(9)Disable TPM irq.✨
tpm_cr50_i2c_enable_tpm_irq(9)Enable TPM irq.✨
tpm_cr50_i2c_get_burst_and_status(9)Get burst count and status.✨
tpm_cr50_i2c_int_handler(9)cr50 interrupt handler.✨
tpm_cr50_i2c_probe(9)Driver probe function.✨
tpm_cr50_i2c_read(9)Read from TPM register.✨
tpm_cr50_i2c_remove(9)Driver remove function.✨
tpm_cr50_i2c_req_canceled(9)Callback to notify a request cancel.✨
tpm_cr50_i2c_tis_recv(9)TPM reception callback.✨
tpm_cr50_i2c_tis_send(9)TPM transmission callback.✨
tpm_cr50_i2c_tis_set_ready(9)Set status register to ready.✨
tpm_cr50_i2c_tis_status(9)Read cr50 tis status.✨
tpm_cr50_i2c_transfer_message(9)Transfer a message over i2c.✨
tpm_cr50_i2c_wait_tpm_ready(9)Wait for tpm to signal ready.✨
tpm_cr50_i2c_write(9)Write to TPM register.✨
tpm_cr50_release_locality(9)Release TPM locality.✨
tpm_cr50_request_locality(9)Request TPM locality.✨
tpm_cr50_vid_to_name(9)Maps VID to name.✨
tpm_crb_ffa_get_interface_version(9)gets the ABI version of the TPM service✨
tpm_crb_ffa_init(9)called by the CRB driver to do any needed initialization✨
tpm_crb_ffa_start(9)signals the TPM that a field has changed in the CRB✨
tpm_default_chip(9)find a TPM chip and get a reference to it✨
tpm_dev_release(9)free chip memory and the device number✨
tpm_get_random(9)get random bytes from the TPM's RNG✨
tpm_ibmvtpm_get_desired_dma(9)Get DMA size needed by this driver✨
tpm_ibmvtpm_probe(9)ibm vtpm initialize entry point✨
tpm_ibmvtpm_recv(9)Receive data after send✨
tpm_ibmvtpm_remove(9)ibm vtpm remove entry point✨
tpm_ibmvtpm_resume(9)Resume from suspend✨
tpm_ibmvtpm_send(9)Send a TPM command✨
tpm_ibmvtpm_suspend(9)Suspend✨
tpm_is_tpm2(9)do we a have a TPM2 chip?✨
tpm_pcr_extend(9)extend a PCR value in SHA1 bank.✨
tpm_pcr_read(9)read a PCR value from SHA1 bank✨
tpm_put_ops(9)Release a ref to the tpm_chip✨
tpm_tis_clkrun_enable(9)Keep clkrun protocol disabled for entire duration of a single TPM command✨
tpm_transmit(9)Internal kernel interface to transmit TPM commands.✨
tpm_transmit_cmd(9)send a tpm command to the device✨
tpm_try_get_ops(9)Get a ref to the tpm_chip✨
tpmm_chip_alloc(9)allocate a new struct tpm_chip instance✨
tprintf(9)formatted output conversion✨
tps65090_fet_enable(9)Enable a FET, trying a few times if it fails✨
tps65090_reg_set_overcurrent_wait(9)Setup overcurrent wait✨
tps65090_try_enable_fet(9)Try to enable a FET✨
tps65217_reg_read(9)Read a single tps65217 register.✨
tps65217_reg_write(9)Write a single tps65217 register.✨
tps65217_update_bits(9)Modify bits w.r.t mask, val and level.✨
tps65218_reg_write(9)Write a single tps65218 register.✨
tps65218_update_bits(9)Modify bits w.r.t mask, val and level.✨
trace__fprintf_cpu(9)Print the CPU ID to a given file stream✨
trace_adjust_address(9)Adjust prev boot address to current address.✨
trace_alloc_vmap_area(9)called when a new vmap allocation occurs✨
trace_array_get_by_name(9)Create/Lookup a trace array, given its name.✨
trace_array_init_printk(9)Initialize buffers for trace_array_printk()✨
trace_array_printk(9)Print a message to a specific instance✨
trace_array_put(9)Decrement the reference counter for this trace array.✨
trace_array_puts(9)write a constant string into the trace buffer.✨
trace_array_set_clr_event(9)enable or disable an event for a trace array.✨
trace_blk_zone_append_update_request_bio(9)update bio sector after zone append✨
trace_blkdev_zone_mgmt(9)Execute a zone management operation on a range of zones✨
trace_block_bio_backmerge(9)merging block operation to the end of an existing operation✨
trace_block_bio_complete(9)completed all work on the block operation✨
trace_block_bio_frontmerge(9)merging block operation to the beginning of an existing operation✨
trace_block_bio_queue(9)putting new block IO operation in queue✨
trace_block_bio_remap(9)map request for a logical device to the raw device✨
trace_block_dirty_buffer(9)mark a buffer dirty✨
trace_block_getrq(9)get a free request entry in queue for block IO operations✨
trace_block_io_done(9)block IO operation request completed✨
trace_block_io_start(9)insert a request for execution✨
trace_block_plug(9)keep operations requests in request queue✨
trace_block_rq_complete(9)block IO operation completed by device driver✨
trace_block_rq_error(9)block IO operation error reported by device driver✨
trace_block_rq_insert(9)insert block operation request into queue✨
trace_block_rq_issue(9)issue pending block IO request operation to device driver✨
trace_block_rq_merge(9)merge request with another one in the elevator✨
trace_block_rq_remap(9)map request for a block operation request✨
trace_block_rq_requeue(9)place block IO request back on a queue✨
trace_block_rq_tag_wait(9)triggered when a request is starved of a tag✨
trace_block_split(9)split a single bio struct into two bio structs✨
trace_block_touch_buffer(9)mark a buffer accessed✨
trace_block_unplug(9)release of operations requests in request queue✨
trace_buffered_event_disable(9)disable buffering events✨
trace_buffered_event_enable(9)enable buffering events✨
trace_call_bpf(9)invoke BPF program✨
trace_call_bpf_faultable(9)invoke BPF program in faultable context✨
trace_cap_capable(9)called after it's determined if a task has a particular effective capability✨
trace_coredump(9)called when a coredump starts✨
trace_dump_stack(9)record a stack back trace in the trace buffer✨
trace_error_report_end(9)called after printing the error report✨
trace_event_buffer_reserve(9)reserve space on the ring buffer for an event✨
trace_filter_add_remove_task(9)Add or remove a task from a pid_list✨
trace_find_filtered_pid(9)check if a pid exists in a filtered_pid list✨
trace_free_vmap_area_noflush(9)called when a vmap area is freed✨
trace_get_event_file(9)Find and return a trace event file✨
trace_gpu_job_irq(9)called after a job interrupt from firmware completes✨
trace_hrtimer_cancel(9)called when the hrtimer is canceled✨
trace_hrtimer_expire_entry(9)called immediately before the hrtimer callback✨
trace_hrtimer_expire_exit(9)called immediately after the hrtimer callback returns✨
trace_hrtimer_rearm(9)Invoked when the clockevent device is rearmed✨
trace_hrtimer_setup(9)called when the hrtimer is initialized✨
trace_hrtimer_start(9)called when the hrtimer is started✨
trace_hrtimer_start_expired(9)Invoked when a expired timer was started✨
trace_ignore_this_task(9)should a task be ignored for tracing✨
trace_instance_destroy(9)destroy and free a rv trace instance✨
trace_instance_init(9)create a trace instance✨
trace_instance_start(9)start tracing a given rv instance✨
trace_io_uring_complete(9)called when completing an SQE✨
trace_io_uring_cqring_wait(9)called before start waiting for an available CQE✨
trace_io_uring_create(9)called after a new io_uring context was prepared✨
trace_io_uring_defer(9)called when an io_uring request is deferred✨
trace_io_uring_fail_link(9)called before failing a linked request✨
trace_io_uring_file_get(9)called before getting references to an SQE file✨
trace_io_uring_link(9)called before the io_uring request added into link_list of another request✨
trace_io_uring_queue_async_work(9)called before submitting a new async work✨
trace_io_uring_register(9)called after a buffer/file/eventfd was successfully registered for a ring✨
trace_io_uring_submit_req(9)called before submitting a request✨
trace_ipi_entry(9)called immediately before the IPI handler✨
trace_ipi_exit(9)called immediately after the IPI handler returns✨
trace_ipi_raise(9)called when a smp cross call is made✨
trace_irq_handler_entry(9)called immediately before the irq action handler✨
trace_irq_handler_exit(9)called immediately after the irq action handler returns✨
trace_itimer_expire(9)called when itimer expires✨
trace_itimer_state(9)called when itimer is started or canceled✨
trace_ksm_advisor(9)called after the advisor has run✨
trace_ksm_enter(9)called after a new process has been added to ksm✨
trace_ksm_exit(9)called after a new process has been removed from ksm✨
trace_ksm_merge_one_page(9)called after a page has been merged✨
trace_ksm_merge_with_ksm_page(9)called after a page has been merged with a ksm page✨
trace_ksm_remove_ksm_page(9)called after a ksm page has been removed✨
trace_ksm_remove_rmap_item(9)called after a rmap_item has been removed from the stable tree✨
trace_ksm_start_scan(9)called after a new ksm scan is started✨
trace_ksm_stop_scan(9)called after a new ksm scan has completed✨
trace_landlock_add_rule_net_port(9)Network-port rule added to a ruleset✨
trace_landlock_add_rule_path_beneath(9)Path-beneath rule added to a ruleset✨
trace_landlock_check_rule_inode(9)Inode rule evaluated during access check✨
trace_landlock_check_rule_net_port(9)Network port rule evaluated✨
trace_landlock_create_domain(9)New domain created✨