📦 libncarg-dev

845 pages · page 4 of 5

M (continued)

mpsetc(3NCARG)Sets the values of certain EZMAP parameters of type CHARACTER. MPSETC is an alternate name for the routine MAPSTC.✨
mpseti(3NCARG)Sets the values of certain EZMAP parameters of type INTEGER. MPSETI is an alternate name for the routine MAPSTI.✨
mpsetl(3NCARG)Sets the values of certain EZMAP parameters of type LOGICAL. MPSETL is an alternate name for the routine MAPSTL.✨
mpsetr(3NCARG)Sets the values of certain EZMAP parameters of type REAL. MPSETR is an alternate name for the routine MAPSTR.✨
mxmy(3NCARG)Retrieves the current pen position in the Plotter Address Unit (PAU) coordinate system.✨

N

natgrid(3NCARG)a package for gridding 2D randomly-spaced data using a natural neighbor algorithm. Single precison and double precision interfaces exist in both Fortran and C.✨
natgrid_errors(3NCARG)This document briefly describes all the errors reported from Natgrid.✨
natgrid_params(3NCARG)This document briefly describes all the internal parameters of Natgrid.✨
natgridd(3NCARG)primary double precision Fortran entry for natural neighbor gridding✨
natgrids(3NCARG)primary single precision Fortran entry for natural neighbor gridding✨
ncarg_cbind(3NCARG)Description of how to use the NCAR Graphics C- binding.✨
ncarg_env(5NCARG)✨
ncarg_gks(1NCAR)NCAR Graphics GKS Environment variables✨
ncarg_gks_cbind(3NCARG)Description of how to use the NCAR Graphics GKS C-binding.✨
ncargintro(5NCARG)NCAR Graphics Overview✨
ncargpath(8NCARG)Return the full pathname to a given NCAR Graphics directory or the default of a particular NCAR Graphics attribute.✨
ncarv_spool(5NCARG)spooled device configuration table for interactive metafile translator ictrans✨
nerro(3NCARG)Referenced by a user to obtain the current value of the internal error flag of SETER.✨
ngckop(3NCARG)a function to check if a specified GKS workstation is open.✨
ngdots(3NCARG)Draws filled circular dots at coordinate positions (X(I),Y(I),I=1,NUM) at size SIZE with color given by the color index ICOLOR.✨
ngezlogo(3NCARG)Draws various NCAR and UCAR logos, the default being to draw an NCAR logo of reasonable size in the lower right corner of a plot.✨
nggcog(3NCARG)Returns the latitudes and longitudes of a set of points approximating a circle at a given point on the surface of the globe.✨
nggetc(3NCARG)Used to retrieve the current value of a specified internal parameter.✨
nggeti(3NCARG)Gets the current integer value of an internal parameter of Ngmisc of type INTEGER. See the ngmisc_params man page for a complete list of all the Ngmisc internal parameters.✨
nggetr(3NCARG)Gets the current real value of an internal parameter of Ngmisc of type REAL. See the ngmisc_params man page for a complete list of all the Ngmisc internal parameters.✨
nggsog(3NCARG)Returns the latitudes and longitudes of six points defining a five-pointed star at a given point on the surface of the globe.✨
nglogo(3NCARG)Draws various NCAR and UCAR logos on a specified workstation.✨
ngmftc(3NCARG)Temporarily closes a metafile output unit allowing for subsequent reopening.✨
ngmisc(3NCARG)A collection of miscellaneous NCAR Graphics routines.✨
ngmisc_params(3NCARG)This document briefly describes all Ngmisc internal parameters.✨
ngpict(3NCARG)Effects a break in the picture drawing sequence in a FORTRAN code using GKS. The actions taken depend on whether the designated workstation is a metafile or an output/input workstation. An option is…✨
ngpswk(3NCARG)returns the workstation type, suitable for use as the third argument in a call to the NCAR GKS routine GOPWK, for the PostScript workstation whose attributes are specified in the function arguments.✨
ngreop(3NCARG)reopen an existing NCAR Graphics metafile for appending.✨
ngritd(3NCARG)Given the coordinates of a point, this routine performs a rotation of that point about a specified axis by a specified angle.✨
ngsetc(3NCARG)Used to set the character value of a specified internal parameter.✨
ngseti(3NCARG)Provides a new integer value for an internal parameter of Ngmisc of type INTEGER. See the ngmisc_params man page for a complete list of all the ngmisc internal parameters.✨
ngsetr(3NCARG)Provides a new real value for an internal parameter of Ngmisc of type REAL. See the ngmisc_params man page for a complete list of all the Ngmisc internal parameters.✨
ngsrat(3NCARG)save/restore/set NCAR GKS primitive attribute values in toto.✨
ngwsym(3NCARG)Draws a symbol from the standard WMO/NOAA meteorological fonts by reference to the font name and symbol number within that font.✨
nngetaspectd(3NCARG)retrieve the double precision aspect at a specified coordinate.✨
nngetaspects(3NCARG)retrieve the aspect at a specified coordinate.✨
nngetc(3NCARG)Retrieves the value of an internal parameter of type CHARACTER.✨
nngeti(3NCARG)Retrieves the value of an internal parameter of type INTEGER.✨
nngetr(3NCARG)Retrieves the value of an internal parameter of type REAL.✨
nngetrd(3NCARG)Retrieves the value of an internal parameter of type DOUBLE PRECISION.✨
nngetsloped(3NCARG)retrieve the double precision slope at a specified coordinate.✨
nngetslopes(3NCARG)retrieve the slope at a specified coordinate.✨
nnpntd(3NCARG)Interpolate at a single point in double precision✨
nnpntend(3NCARG)terminate interpolation in single point mode✨
nnpntendd(3NCARG)terminate interpolation in single point mode✨
nnpntinitd(3NCARG)Enter single point mode in double precision✨
nnpntinits(3NCARG)Enter single point mode✨
nnpnts(3NCARG)Interpolate at a single point✨
nnsetc(3NCARG)Sets the value of an internal parameter of type CHARACTER.✨
nnseti(3NCARG)Sets the value of an internal parameter of type INTEGER.✨
nnsetr(3NCARG)Sets the value of an internal parameter of type REAL.✨
nnsetrd(3NCARG)Sets the value of an internal parameter of type DOUBLE PRECISION.✨

O

opngks(3NCARG)Opens GKS, opens and activates an NCAR GCM workstation (workstation of type 1) with workstation ID of 1 and connection ID of 2.✨

P

pcdlsc(3NCARG)Defines the default list of "special colors" used by PCHIQU in drawing certain characters from the filled fonts. Calling PCDLSC with the argument IFCI will define color indices IFCI, IFCI+1, IFCI+2…✨
pcgetc(3NCARG)Retrieves the current character value of an internal parameter.✨
pcgeti(3NCARG)Retrieves the integral value of an internal parameter of type INTEGER or REAL.✨
pcgetr(3NCARG)Retrieves the real value of an internal parameter of type REAL or INTEGER.✨
pchiqu(3NCARG)Draws high quality characters. By default, it uses the same database as the old NCAR Graphics routine PWRITX, but it can also use characters from any of the fontcap-defined databases, it has an…✨
pcloqu(3NCARG)Draws characters of "low quality" by calling the GKS character- drawing routines. No function codes may be used. Using PCLOQU to draw a given string of characters will create a smaller metafile than…✨
pcmequ(3NCARG)Draws characters of "medium quality". It does this by drawing lines, just as PCHIQU does, but it does not produce quite such fancy characters. No function codes may be used. Using PCMEQU to draw a…✨
pcmpxy(3NCARG)This routine is normally not called directly by the user (though it can be). It is called by each of the routines PCHIQU, PCMEQU, and PCLOQU when the user has set the mapping flag ´MA´ nonzero to…✨
pcpnwi(3NCARG)A function of type CHARACTER*16.✨
pcrset(3NCARG)Resets all parameters to their initial default values.✨
pcsetc(3NCARG)Gives a new character value to a specified internal parameter.✨
pcseti(3NCARG)Sets the value of an internal parameter of type INTEGER or REAL.✨
pcsetr(3NCARG)Sets the value of an internal parameter of type REAL or INTEGER.✨
perim(3NCARG)Draws an unlabeled perimeter with inward-pointing tick marks. The directions and lengths of tick marks may be changed by calling TICKS and/or TICK4.✨
perim3(3NCARG)Draws the projection of a rectangular perimeter in a plane parallel to one of the three coordinate planes, with inward-pointing tick marks at specified intervals.✨
periml(3NCARG)Draws a labeled perimeter with inward-pointing tick marks. The directions and lengths of tick marks may be changed by calling TICKS and/or TICK4.✨
plchhq(3NCARG)Draws high quality characters. By default, it uses the same database as the old NCAR Graphics routine PWRITX, but it can also use characters from any of the fontcap-defined databases, it has an…✨
plchlq(3NCARG)Draws characters of "low quality" by calling the GKS character- drawing routines. No function codes may be used. Using PCLOQU to draw a given string of characters will create a smaller metafile than…✨
plchmq(3NCARG)Draws characters of "medium quality". It does this by drawing lines, just as PCHIQU does, but it does not produce quite such fancy characters. No function codes may be used. Using PCMEQU to draw a…✨
plotchar(3NCARG)Allows a user to draw characters of high, medium, or low quality.✨
plotchar_params(3NCARG)This document briefly describes all the internal parameters of Plotchar.✨
plotif(3NCARG)A line-drawing routine, described in terms of "pen moves". Most calls to PLOTIF specify whether the "pen" should be up (not drawing) or down (drawing) and then move it to a designated position in the…✨
plotit(3NCARG)A line-drawing routine, described in terms of "pen moves". Most calls to PLOTIT specify whether the "pen" should be up (not drawing) or down (drawing) and then move it to a designated position in the…✨
point(3NCARG)draws a point at a specified position in the user coordinate system.✨
point3(3NCARG)Draws the projection of a point in 3-space.✨
points(3NCARG)draws a marker at each of a series of specified positions in the user coordinate system. The markers can also be connected by drawing lines between them.✨
polypack(3NCARG)a set of routines allowing polygons to be manipulated in various ways. Each of the six principal routines is given a "clip" polygon, a "subject" polygon, and a workspace; it operates on the two…✨
ppdipo(3NCARG)generates and returns the boundary of the "difference" polygon, which consists of all points that are inside the subject polygon but not inside the clip polygon.✨
ppditr(3NCARG)generates and returns a set of trapezoids representing the interior of the "difference" polygon, which consists of all points that are inside the subject polygon but not inside the clip polygon.✨
ppinpo(3NCARG)generates and returns the boundary of the "intersection" polygon, which consists of all points that are inside both the clip polygon and the subject polygon.✨
ppintr(3NCARG)generates and returns a set of trapezoids representing the interior of the "intersection" polygon, which consists of all points that are inside both the clip polygon and the subject polygon.✨
ppplcl(3NCARG)clips a polyline against a clipping rectangle. It is intended that, eventually, there should be a better routine that will clip a polyline against an arbitrary polygon, but that routine has not yet…✨
ppppap(3NCARG)can be called to preprocess a polygon in such a way as to remove certain peculiarities that can cause minor cosmetic errors in the output from the routines that return trapezoids.✨
ppunpo(3NCARG)generates and returns the boundary of the "union" polygon, which consists of all points that are inside either or both of the clip polygon and the subject polygon.✨
ppuntr(3NCARG)generates and returns a set of trapezoids representing the interior of the "union" polygon, which consists of all points that are inside either or both of the clip polygon and the subject polygon.✨
pre2ncgm(1NCARG)convert a pre-CGM NCAR metafile to an NCAR CGM.✨
psym3(3NCARG)Draws the projections of character strings that are positioned in a plane parallel to one of the three coordinate planes. NOTE: At one time, a Threed routine called PSYM3 was supported. It has long…✨
pwrit(3NCARG)draws a specified text string at a specified position in the user coordinate system. The call has arguments specifying the size, orientation, and centering of the string.✨
pwrite_family(3NCARG)A utility for drawing text and other characters using polylines.✨
pwritx(3NCARG)draws text and other characters using polylines.✨
pwrity(3NCARG)draws text and other characters using polylines.✨
pwrz(3NCARG)Draws the projections of character strings that are positioned in a plane parallel to one of the three coordinate planes. NOTE: At one time, a Threed routine called PWRZ was supported. PWRZ has been…✨
pwrzi(3NCARG)A character-plotting routine for plotting characters in three- space when using Isosurface. For a large class of possible positions, the hidden character problem is solved.✨
pwrzs(3NCARG)A character-plotting routine for plotting characters in three- space when using SRFACE.✨
pwrzt(3NCARG)Draws the projections of character strings that are positioned in a plane parallel to one of the three coordinate planes.✨

R

ras_formats(1NCAR)Information on raster formats supported by NCAR Graphics and NCAR View.✨
ras_palette(5NCARG)format descriptions for palette files for NCAR View✨
reset(3NCARG)The "super" version of RESET zeroes the internal integer array used to detect crowded lines; other versions do nothing.✨
retsr(3NCARG)Called by a user to return to a saved state of the recovery mode in NCAR Graphics.✨
rgbhls(3NCARG)Converts a color specification given in the Red, Green, Blue (RGB) color space to color values in the Hue, Lightness, Saturation (HLS) color space.✨
rgbhsv(3NCARG)Converts a color specification given in the Red, Green, Blue (RGB) color space to color values in the Hue, Saturation, and Value (HSV) color space.✨
rgbyiq(3NCARG)Converts a color specification given in the RGB Red, Green, Blue, (RGB) color space to a color specification in the YIQ color space.✨

S

scrolled_title(3NCARG)Creates movie titles. The titles can be scrolled, faded in, and/or faded out. Foreground and background colors can be specified.✨
scrolled_title_params(3NCARG)This document briefly describes all Scrolled_title internal parameters.✨
semess(3NCARG)Called by a user to get a specified portion of the current error message.✨
set(3NCARG)defines the mapping between fractional and user coordinates: sets the values of the SPPS internal parameters 'LS' (axis linear/log scaling) and 'MI' (axis mirror imaging); defines GKS normalization…✨
set3(3NCARG)Defines the transformation from three dimensions to two dimensions.✨
seter(3NCARG)Called by NCAR Graphics routines when errors occur.✨
seti(3NCARG)sets the exponents which define the plotting range in the plotter address unit coordinate system.✨
setr(3NCARG)Establishes certain constants so that SRFACE produces a picture whose size changes with respect to the viewer's distance from the object. It can also be used when making a movie of an object evolving…✨
setusv(3NCARG)sets the value of one of the internal parameters of SPPS.✨
sfgetc(3NCARG)Used to retrieve the current value of a specified internal parameter.✨
sfgeti(3NCARG)Used to retrieve the current integer value of a specified parameter.✨
sfgetp(3NCARG)Used to retrieve the current dot pattern.✨
sfgetr(3NCARG)Used to retrieve the current real value of a specified parameter.✨
sflush(3NCARG)Flushes polylines, accumulated through calls to the routines PLOTIF and PLOTIT, from the SPPS polyline buffer shared by those routines; updates all open workstations; and flushes all system-level I/O…✨
sfnorm(3NCARG)The subroutines SFWRLD and SFNORM are used to fill that portion of the plotter frame inside the area defined by a given polygonal boundary.✨
sfsetc(3NCARG)Used to set the character value of a specified internal parameter.✨
sfseti(3NCARG)Used to set the current integer value of a specified internal parameter.✨
sfsetp(3NCARG)Defines a new dot pattern.✨
sfsetr(3NCARG)Used to set the current real value of a specified internal parameter.✨
sfsgfa(3NCARG)(which stands for "SOFTFILL - Simulate GFA") fills, in one of various ways, an area of the plotter frame defined by a given set of points; it is intended to provide a way to use the GKS fill-area…✨
sfwrld(3NCARG)The subroutines SFWRLD and SFNORM are used to fill that portion of the plotter frame inside the area defined by a given polygonal boundary.✨
shgeti(3NCARG)Retrieves the value of an internal parameter of type INTEGER.✨
shgetnp(3NCARG)find the nearest points to a specified point in 3-space.✨
shgrid(3NCARG)interpolate random data in 3-space using a modified Shepard's algorithm✨
shgrid_errors(3NCARG)This document briefly describes all the errors reported from Shgrid.✨
shgrid_params(3NCARG)This document briefly describes all the internal parameters of Shgrid.✨
shseti(3NCARG)Sets the value of an internal parameter of type INTEGER.✨
slgeti(3NCARG)Gets the current integer value of an internal parameter of Scrolled_title of type INTEGER or REAL. See the scrolled_title_params man page for a complete list of all the Scrolled_title internal…✨
slgetr(3NCARG)Gets the current real value of an internal parameter of Scrolled_title of type INTEGER or REAL. See the scrolled_title_params man page for a complete list of all the Scrolled_title internal…✨
slogap(3NCARG)Generates TIME seconds worth of blank frames in a manner consistent with FTITLE.✨
slrset(3NCARG)Resets all parameters of Scrolled_title to the initial default values.✨
slseti(3NCARG)Provides a new integer value for an internal parameter of Scrolled_title of type INTEGER or REAL. See the scrolled_title_params man page for a complete list of all the Scrolled_title internal…✨
slsetr(3NCARG)Provides a new real value for an internal parameter of Scrolled_title of type INTEGER or REAL. See the scrolled_title_params man page for a complete list of all the Scrolled_title internal parameters.✨
softfill(3NCARG)Fills a polygonal subset of the plotter frame.✨
softfill_params(3NCARG)This document briefly describes all Softfill internal parameters.✨
spps(3NCARG)a collection of routines for defining and managing NCAR Graphics coordinate systems, for drawing lines, markers, and text in those coordinate systems, and for implementing efficiency considerations…✨
spps_converters(3NCARG)A set of functions, each of which transforms a coordinate from one of the NCAR Graphics coordinate systems to another. The complete list of functions is as follows: CFUX, CFUY, CMFX, CMFY, CMUX…✨
spps_params(3NCARG)This document briefly describes all of the internal parameters of SPPS.✨
srface(3NCARG)Draws a perspective picture of a function of two variables with hidden lines removed. The function is approximated by a two-dimensional array of heights.✨
stgetc(3NCARG)Gets the current value of a Streamlines parameter of type CHARACTER.✨
stgeti(3NCARG)Gets the current value of an internal parameter of type INTEGER.✨
stgetr(3NCARG)Gets the current value of an internal parameter of type REAL.✨
stinit(3NCARG)Performs initialization tasks required before STREAM may be called to create a streamline field flow plot. Information about the input data arrays is copied into internal common block variables and…✨
stitle(3NCARG)Creates scrolled movie or video titles. It receives all input through the argument list.✨
stream(3NCARG)Plots a streamline representation of field flow data, based on conditions established by STINIT and the current values of a set of user-modifiable internal parameters associated with the Streamlines…✨
streamlines(3NCARG)Utility for plotting a streamline representation of field flow data given two arrays containing the vector field components on a uniform grid.✨
streamlines_params(3NCARG)This document briefly describes all Streamlines internal parameters.✨
strmln(3NCARG)Plots a streamline representation of field flow data, given two 2-dimensional vector component arrays, U and V. You may control certain characteristics of the plot by adjusting the values given to…✨
strset(3NCARG)Resets all parameters to their initial default values.✨
stsetc(3NCARG)Sets the value of a Streamlines parameter of type CHARACTER.✨
stseti(3NCARG)Sets the value of an internal parameter of type INTEGER.✨
stsetr(3NCARG)Sets the value of an internal parameter of type REAL.✨
stuixy(3NCARG)Inversely maps a single point on the streamline from user to data coordinate space.✨
stumsl(3NCARG)This routine is the user-definable external subroutine used to draw masked streamlines. The default version of the routine draws any polyline all of whose area identifiers are greater than or equal…✨
stumta(3NCARG)Given the coordinates of a point on the streamline in data, user, and NDC space, and the interpolated, normalized components of the vector at the point relative to data coordinate space, the user-…✨
stumxy(3NCARG)Maps a single point on the streamline from data to user coordinate space.✨
supcon(3NCARG)Projects points. SUPCON is an alternate name for the routine MAPTRN.✨
supmap(3NCARG)Draws a map with a single call. An implementation of the routine from which EZMAP grew.✨
surf1(3NCARG)calculate values for SURF2 usage.✨
surf2(3NCARG)2D interpolation for gridded data✨
surface(3NCARG)A utility for drawing perspective picture of a function of two variables with hidden lines removed.✨
surface_params(3NCARG)This document briefly describes the Surface internal parameters.✨

T

tdclrs(3NCARG)Does GKS calls to define colors for TDPACK.✨
tdctri(3NCARG)Cut triangles defined by a triangle list.✨
tddtri(3NCARG)Draw the triangles defined by a triangle list.✨
tdez2d(3NCARG)Provides a simplified interface to TDPACK for drawing surfaces.✨
tdez3d(3NCARG)Provides a simplified interface to TDPACK for drawing isosurfaces.✨
tdgeti(3NCARG)Retrieves the integer value of a Tdpack parameter.✨
tdgetr(3NCARG)Retrieves the real value of a Tdpack parameter.✨
tdgrds(3NCARG)Draw perimeters, optionally with ticks or grid lines, on the six sides of a box. This routine calls TDPARA and will therefore change the definition of the reference parallelogram.✨
tdgrid(3NCARG)Draw a perimeter, optionally with ticks or grid lines, around the edges of the reference parallelogram defined by the last call to TDPARA. This routine is normally called indirectly (by virtue of a…✨
tdgtrs(3NCARG)Get the values defining a selected rendering style, which affects the appearance of triangles drawn by a call to the routine TDDTRI.✨
tdinit(3NCARG)Initialization routine for TDPACK, called to define the position of the eye, the position of the point looked at, which way is up, and whether or not a stereo view is to be done.✨
tditri(3NCARG)Add triangles defining a simple surface to the triangles in a triangle list.✨
tdlbla(3NCARG)This routine is called to put labels on a particular edge of a box.✨
tdlbls(3NCARG)Draw labels on selected sides of a projected box. This routine calls TDPARA and will therefore change the definition of the reference parallelogram; it also changes the value of the internal…✨
tdline(3NCARG)Given the coordinates of two points in 3-space, draw the projection of the line joining them.✨
tdlnpa(3NCARG)Given the coordinates of two points in the reference parallelogram, draw the projection of the line joining them.✨
tdmtri(3NCARG)Add triangles defining a 3D marker to the triangles in a triangle list.✨
tdotri(3NCARG)Order the triangles defined by a triangle list.✨
tdpack(3NCARG)A set of routines allowing one to draw representations of three-dimensional objects.✨
tdpack_params(3NCARG)This document briefly describes all internal parameters of Tdpack.✨
tdpara(3NCARG)Initialization routine for TDPACK, called to set the value of certain internal values.✨
tdplch(3NCARG)Draw a character string at a specified position in the plane of the reference parallelogram.✨
tdprpa(3NCARG)Given the parallelogram coordinates of a point, get the coordinates of its projection in the projection plane. This routine is essentially the inverse of the routine TDPRPI.✨
tdprpi(3NCARG)Given a point in the projection plane, retrieve the parallelogram coordinates of that point in the reference parallelogram (as defined by the last call to TDPARA) that projects into it. This routine…✨
tdprpt(3NCARG)Given the coordinates of a point in 3-space, get the coordinates of its projection in the projection plane.✨
tdseti(3NCARG)Provides a new integer value for a Tdpack parameter.✨
tdsetr(3NCARG)Provides a new real value for a Tdpack parameter.✨
tdsort(3NCARG)A generic sorting routine, normally used indirectly (by calling the routine TDOTRI).✨