qed_mcp_nvm_resp(9)

🌸 NAME 🌸

Okay so this is qed_mcp_nvm_resp(9) from the Kernel API Manual, and the whole vibe is: check latest response. That’s literally it: qed_mcp_nvm_resp — Check latest response. Bestie, it’s a tiny little check-in function and I’m obsessed with how straightforward it is 🫶✨.

✨ SYNOPSIS ✨

Here’s the signature, no cap — copy it exactly:

int qed_mcp_nvm_resp (struct qed_dev *cdev , u8 *p_buf );

🎀 ARGUMENTS 🎀

Two args walk into the group chat:

• cdev — Qed dev pointer.
• p_buf — NVM write buffer.

💅 RETURN 💅

Return: Int - 0 - Operation was successul.

Yes, “successul” is exactly how the page spells it. I’m not fixing it, I’m preserving the lore 💀✨.

🦋 SEE ALSO 🦋

Kernel file: ./drivers/net/ethernet/qlogic/qed/qed_mcp.h

Also see these iconic little references, same order, no missing besties:

• qed_mcp_get_link_params(9)
• qed_mcp_get_link_state(9)
• qed_mcp_get_link_capabilities(9)
• qed_mcp_set_link(9)
• qed_mcp_get_mfw_ver(9)
• qed_mcp_get_mbi_ver(9)
• qed_mcp_get_media_type(9)
• qed_mcp_get_transceiver_data(9)
• qed_mcp_trans_speed_mask(9)
• qed_mcp_get_board_config(9)
• qed_mcp_cmd(9)
• qed_mcp_cmd_nosleep(9)
• qed_mcp_drain(9)
• qed_mcp_get_flash_size(9)
• qed_mcp_send_drv_version(9)
• qed_get_process_kill_counter(9)
• qed_start_recovery_process(9)
• qed_recovery_prolog(9)
• qed_mcp_ov_update_current_config(9)
• qed_mcp_ov_update_driver_state(9)
• qed_mcp_ov_update_mtu(9)
• qed_mcp_ov_update_mac(9)
• qed_mcp_ov_update_wol(9)
• qed_mcp_set_led(9)
• qed_mcp_nvm_read(9)
• qed_mcp_nvm_write(9)
• qed_mcp_get_nvm_image_att(9)
• qed_mcp_get_nvm_image(9)
• qed_mcp_bist_register_test(9)
• qed_mcp_bist_clock_test(9)
• qed_mcp_bist_nvm_get_num_images(9)
• qed_mcp_bist_nvm_get_image_att(9)
• qed_mfw_process_tlv_req(9)
• qed_mcp_send_raw_debug_data(9)
• qed_mcp_is_ext_speed_supported(9)
• qed_mcp_cmd_init(9)
• qed_mcp_cmd_port_init(9)
• qed_mcp_free(9)
• qed_mcp_handle_events(9)
• qed_mcp_load_req(9)
• qed_mcp_load_done(9)
• qed_mcp_unload_req(9)
• qed_mcp_unload_done(9)
• qed_mcp_read_mb(9)
• qed_mcp_ack_vf_flr(9)
• qed_mcp_fill_shmem_func_info(9)
• qed_mcp_reset(9)
• qed_mcp_nvm_rd_cmd(9)
• qed_mcp_phy_sfp_read(9)
• qed_mcp_is_init(9)
• qed_mcp_config_vf_msix(9)
• qed_mcp_halt(9)
• qed_mcp_resume(9)
• qed_mcp_set_resc_max_val(9)
• qed_mcp_get_resc_info(9)
• qed_mcp_ov_update_eswitch(9)
• qed_mcp_initiate_pf_flr(9)
• qed_mcp_resc_lock(9)
• qed_mcp_resc_unlock(9)
• qed_mcp_resc_lock_default_init(9)
• qed_mcp_is_smart_an_supported(9)
• qed_mcp_get_capabilities(9)
• qed_mcp_set_capabilities(9)
• qed_mcp_read_ufp_config(9)
• qed_mcp_nvm_info_populate(9)
• qed_mcp_nvm_info_free(9)
• qed_mcp_get_engine_config(9)
• qed_mcp_get_ppfid_bitmap(9)
• qed_mcp_nvm_get_cfg(9)
• qed_mcp_nvm_set_cfg(9)
• qed_mcp_is_esl_supported(9)
• qed_mcp_get_esl_status(9)

Sign-off time, bestie: this page came from ./drivers/net/ethernet/qlogic/qed, dated October 2026, and it’s the qed_mcp_nvm_resp(9) manual page. Bye bestie, go check that latest response 💖✨👑