ep0_idle(9)
πΈ NAME πΈ
okay so bestie, this page is from the Kernel API Manual, and it's literally ep0_idle β Put control endpoint into idle state. that's it, that's the whole assignment. β¨π«Ά
π¦ SYNOPSIS π¦
void ep0_idle (struct pxa_udc *dev );
π ARGUMENTS π
devβ the udc device. yes, that's the one and only argument, bestie. π
π SEE ALSO π
okay so the Kernel file is ./drivers/usb/gadget/udc/pxa27x_udc.c, and the reference squad starts with is_match_usb_pxa(9), then keeps going like this:
is_match_usb_pxa(9)find_pxa_ep(9)update_pxa_ep_matches(9)pio_irq_enable(9)pio_irq_disable(9)udc_set_mask_UDCCR(9)udc_clear_mask_UDCCR(9)ep_write_UDCCSR(9)ep_count_bytes_remain(9)ep_is_empty(9)ep_is_full(9)epout_has_pkt(9)set_ep0state(9)inc_ep_stats_reqs(9)inc_ep_stats_bytes(9)pxa_ep_setup(9)pxa_eps_setup(9)pxa_ep_alloc_request(9)pxa_ep_free_request(9)ep_add_request(9)ep_del_request(9)req_done(9)ep_end_out_req(9)ep0_end_out_req(9)ep_end_in_req(9)ep0_end_in_req(9)nuke(9)read_packet(9)write_packet(9)read_fifo(9)write_fifo(9)read_ep0_fifo(9)write_ep0_fifo(9)pxa_ep_queue(9)pxa_ep_dequeue(9)pxa_ep_set_halt(9)pxa_ep_fifo_status(9)pxa_ep_fifo_flush(9)pxa_ep_enable(9)pxa_ep_disable(9)dplus_pullup(9)pxa_udc_get_frame(9)pxa_udc_wakeup(9)should_enable_udc(9)should_disable_udc(9)pxa_udc_pullup(9)pxa_udc_vbus_session(9)pxa_udc_vbus_draw(9)pxa_udc_phy_event(9)udc_disable(9)udc_init_data(9)udc_enable(9)pxa27x_udc_start(9)stop_activity(9)pxa27x_udc_stop(9)handle_ep0_ctrl_req(9)handle_ep0(9)handle_ep(9)pxa27x_change_configuration(9)pxa27x_change_interface(9)irq_udc_suspend(9)irq_udc_resume(9)irq_udc_reconfig(9)irq_udc_reset(9)pxa_udc_irq(9)pxa_udc_probe(9)pxa_udc_remove(9)pxa_udc_suspend(9)pxa_udc_resume(9)
okay that's the whole page, bestie π it's from ./drivers/usb/gadget/udc, dated October 2026, and it's literally ep0_idle(9) β periodt. π
π¦ where this page comes from
- nixpkgs unstable: linux-manual 7.3.1
- π girlified by deepseek-ai/DeepSeek-V4.1-Flash-1017 on : a language model's rewrite of the original, under its terms