e1000e_phy_init_script_igp3(9)

e1000e_phy_init_script_igp3(9) 💅

okay so bestie, welcome to the Kernel API Manual page for e1000e_phy_init_script_igp3(9) — yes, the name is long, but we’re gonna get through it together. ✨

💖 NAME 💖

e1000e_phy_init_script_igp3 — Inits the IGP3 PHY. literally what it says, no cap. 🫶

✨ SYNOPSIS ✨

s32 e1000e_phy_init_script_igp3 (struct e1000_hw *hw );

🎀 ARGUMENTS 🎀

• hw — pointer to the HW structure. that’s the whole argument, bestie — it’s giving “just hand over the HW struct” energy. 🔥

🦋 DESCRIPTION 🦋

It initializes a Intel Gigabit PHY3 when an EEPROM is not present. that’s the plot: no EEPROM? PHY3 gets initialized. periodt. 💅

🌈 SEE ALSO 🌈

Kernel file: ./drivers/net/ethernet/intel/e1000e/phy.c — and here’s the full bestie roll call, every single one, no skipping. 👑

• e1000e_check_reset_block_generic(9)
• e1000e_get_phy_id(9)
• e1000e_phy_reset_dsp(9)
• e1000e_read_phy_reg_mdic(9)
• e1000e_write_phy_reg_mdic(9)
• e1000e_read_phy_reg_m88(9)
• e1000e_write_phy_reg_m88(9)
• e1000_set_page_igp(9)
• __e1000e_read_phy_reg_igp(9)
• e1000e_read_phy_reg_igp(9)
• e1000e_read_phy_reg_igp_locked(9)
• __e1000e_write_phy_reg_igp(9)
• e1000e_write_phy_reg_igp(9)
• e1000e_write_phy_reg_igp_locked(9)
• __e1000_read_kmrn_reg(9)
• e1000e_read_kmrn_reg(9)
• e1000e_read_kmrn_reg_locked(9)
• __e1000_write_kmrn_reg(9)
• e1000e_write_kmrn_reg(9)
• e1000e_write_kmrn_reg_locked(9)
• e1000_set_master_slave_mode(9)
• e1000_copper_link_setup_82577(9)
• e1000e_copper_link_setup_m88(9)
• e1000e_copper_link_setup_igp(9)
• e1000_phy_setup_autoneg(9)
• e1000_copper_link_autoneg(9)
• e1000e_setup_copper_link(9)
• e1000e_phy_force_speed_duplex_igp(9)
• e1000e_phy_force_speed_duplex_m88(9)
• e1000_phy_force_speed_duplex_ife(9)
• e1000e_phy_force_speed_duplex_setup(9)
• e1000e_set_d3_lplu_state(9)
• e1000e_check_downshift(9)
• e1000_check_polarity_m88(9)
• e1000_check_polarity_igp(9)
• e1000_check_polarity_ife(9)
• e1000_wait_autoneg(9)
• e1000e_phy_has_link_generic(9)
• e1000e_get_cable_length_m88(9)
• e1000e_get_cable_length_igp_2(9)
• e1000e_get_phy_info_m88(9)
• e1000e_get_phy_info_igp(9)
• e1000_get_phy_info_ife(9)
• e1000e_phy_sw_reset(9)
• e1000e_phy_hw_reset_generic(9)
• e1000e_get_cfg_done_generic(9)
• e1000e_get_phy_type_from_id(9)
• e1000e_determine_phy_address(9)
• e1000_get_phy_addr_for_bm_page(9)
• e1000e_write_phy_reg_bm(9)
• e1000e_read_phy_reg_bm(9)
• e1000e_read_phy_reg_bm2(9)
• e1000e_write_phy_reg_bm2(9)
• e1000_enable_phy_wakeup_reg_access_bm(9)
• e1000_disable_phy_wakeup_reg_access_bm(9)
• e1000_access_phy_wakeup_reg_bm(9)
• e1000_power_up_phy_copper(9)
• e1000_power_down_phy_copper(9)
• __e1000_read_phy_reg_hv(9)
• e1000_read_phy_reg_hv(9)
• e1000_read_phy_reg_hv_locked(9)
• e1000_read_phy_reg_page_hv(9)
• __e1000_write_phy_reg_hv(9)
• e1000_write_phy_reg_hv(9)
• e1000_write_phy_reg_hv_locked(9)
• e1000_write_phy_reg_page_hv(9)
• e1000_get_phy_addr_for_hv_page(9)
• e1000_access_phy_debug_regs_hv(9)
• e1000_link_stall_workaround_hv(9)
• e1000_check_polarity_82577(9)
• e1000_phy_force_speed_duplex_82577(9)
• e1000_get_phy_info_82577(9)
• e1000_get_cable_length_82577(9)

cute little sign-off, bestie: the source/version footer vibe is ./drivers/net/ethernet/intel/e..., dated October 2026, and this iconic page is e1000e_phy_init_script_igp3(9). periodt. 🫶💖