dwc2_hsotg_complete_request(9)

💅 dwc2_hsotg_complete_request(9)

okay bestie, this is the Kernel API Manual page for dwc2_hsotg_complete_request(9), and it's giving kernel-internals main character energy. Let's get into it. ✨

💖 NAME

dwc2_hsotg_complete_request — complete a request given to us. literally the whole point, no cap. 💅

✨ SYNOPSIS ✨

void dwc2_hsotg_complete_request (struct dwc2_hsotg *hsotg , struct
       dwc2_hsotg_ep *hs_ep , struct dwc2_hsotg_req *hs_req , int result );

🎀 ARGUMENTS 🎀

• hsotg — the device state, like the whole device situation we're working with. 🫶
• hs_ep — the endpoint the request was on. that's its spot. ✨
• hs_req — the request to complete. yes bestie, this one right here. 💅
• result — the result code (0 => Ok, otherwise errno). keep that exactly in mind. 🔥

🦋 DESCRIPTION 🦋

okay so the given request has finished. when that happens, call the necessary completion if it has one, and then look to see if we can start a new request on the endpoint. that's the little routine, bestie. 🫶

🚨 note note note: this expects the ep to already be locked as appropriate. it is not out here doing that for you, iykyk. 💀

🌈 SEE ALSO 🌈

Kernel file ./drivers/usb/dwc2/gadget.c — that's the home base. also go peek at this whole friend group:

• using_dma(9)
• dwc2_gadget_incr_frame_num(9)
• dwc2_gadget_dec_frame_num_by_one(9)
• dwc2_hsotg_en_gsint(9)
• dwc2_hsotg_disable_gsint(9)
• dwc2_hsotg_ctrl_epint(9)
• dwc2_hsotg_tx_fifo_count(9)
• dwc2_hsotg_tx_fifo_total_depth(9)
• dwc2_gadget_wkup_alert_handler(9)
• dwc2_hsotg_tx_fifo_average_depth(9)
• dwc2_hsotg_init_fifo(9)
• dwc2_hsotg_ep_alloc_request(9)
• is_ep_periodic(9)
• dwc2_hsotg_unmap_dma(9)
• dwc2_hsotg_write_fifo(9)
• get_ep_limit(9)
• dwc2_hsotg_read_frameno(9)
• dwc2_gadget_get_chain_limit(9)
• dwc2_hsotg_start_req(9)
• dwc2_hsotg_map_dma(9)
• dwc2_gadget_target_frame_elapsed(9)
• dwc2_hsotg_complete_oursetup(9)
• ep_from_windex(9)
• dwc2_hsotg_set_test_mode(9)
• dwc2_hsotg_send_reply(9)
• dwc2_hsotg_process_req_status(9)
• get_ep_head(9)
• dwc2_gadget_start_next_request(9)
• dwc2_hsotg_process_req_feature(9)
• dwc2_hsotg_stall_ep0(9)
• dwc2_hsotg_process_control(9)
• dwc2_hsotg_complete_setup(9)
• dwc2_hsotg_enqueue_setup(9)
• dwc2_hsotg_rx_data(9)
• dwc2_hsotg_ep0_zlp(9)
• dwc2_hsotg_handle_outdone(9)
• dwc2_hsotg_handle_rx(9)
• dwc2_hsotg_ep0_mps(9)
• dwc2_hsotg_set_ep_maxpacket(9)
• dwc2_hsotg_txfifo_flush(9)
• dwc2_hsotg_trytx(9)
• dwc2_hsotg_complete_in(9)
• dwc2_gadget_read_ep_interrupts(9)
• dwc2_gadget_handle_ep_disabled(9)
• dwc2_gadget_handle_out_token_ep_disabled(9)
• dwc2_gadget_handle_nak(9)
• dwc2_hsotg_epint(9)
• dwc2_hsotg_irq_enumdone(9)
• kill_all_requests(9)
• dwc2_hsotg_disconnect(9)
• dwc2_hsotg_irq_fifoempty(9)
• dwc2_hsotg_core_init_disconnected(9)
• dwc2_gadget_handle_incomplete_isoc_in(9)
• dwc2_gadget_handle_incomplete_isoc_out(9)
• dwc2_hsotg_irq(9)
• dwc2_hsotg_ep_enable(9)
• dwc2_hsotg_ep_disable(9)
• on_list(9)
• dwc2_hsotg_ep_dequeue(9)
• dwc2_gadget_ep_set_wedge(9)
• dwc2_hsotg_ep_sethalt(9)
• dwc2_hsotg_ep_sethalt_lock(9)
• dwc2_hsotg_init(9)
• dwc2_hsotg_udc_start(9)
• dwc2_hsotg_udc_stop(9)
• dwc2_hsotg_gadget_getframe(9)
• dwc2_hsotg_set_selfpowered(9)
• dwc2_hsotg_pullup(9)
• dwc2_hsotg_vbus_draw(9)
• dwc2_hsotg_initep(9)
• dwc2_hsotg_hw_cfg(9)
• dwc2_hsotg_dump(9)
• dwc2_gadget_init(9)
• dwc2_hsotg_remove(9)
• dwc2_backup_device_registers(9)
• dwc2_restore_device_registers(9)
• dwc2_gadget_init_lpm(9)
• dwc2_gadget_program_ref_clk(9)
• dwc2_gadget_enter_hibernation(9)
• dwc2_gadget_exit_hibernation(9)
• dwc2_gadget_enter_partial_power_down(9)
• dwc2_gadget_enter_clock_gating(9)

and that's the page, bestie! 🫶 this cutie lives in ./drivers/usb/dwc2, is dated October 2026, and it's the dwc2_hsotg_complete_request(9) manual page. slay and bye! 💖