ata_scsiop_inq_std(9)

🌸 NAME 🌸

okay so bestie, welcome to the manual page for ata_scsiop_inq_std(9) from the Kernel API Manual — the function is literally ata_scsiop_inq_std, and its whole thing is Simulate standard INQUIRY command 💖✨ slay.

✨ SYNOPSIS ✨

the signature, verbatim, no cap:

unsigned int ata_scsiop_inq_std (struct ata_device *dev , struct
       scsi_cmnd *cmd , u8 *rbuf );

🎀 ARGUMENTS 🎀

• dev — Target device — the device we’re targeting, periodt.
• cmd — SCSI command of interest — yes, that SCSI command, the one we care about.
• rbuf — Response buffer, to which simulated SCSI cmd output is sent 🫶 — it’s where the simulated SCSI cmd output goes, fr fr.

💅 DESCRIPTION 💅

So the function returns standard device identification data associated with non-VPD INQUIRY command output. That’s the tea ☕ — it’s giving standard device identification data for non-VPD INQUIRY output, and honestly? iconic.

LOCKING: spin_lock_irqsave(host lock) — that’s the locking note, bestie, literally as written 💅🔒

🦋 SEE ALSO 🦋

the whole reference friend group, no cap:

• Kernel file: ./drivers/ata/libata-scsi.c
• ata_scsi_set_passthru_sense_fields(9)
• ata_std_bios_param(9)
• ata_scsi_unlock_native_capacity(9)
• ata_get_identity(9)
• ata_cmd_ioctl(9)
• ata_task_ioctl(9)
• ata_scsi_qc_new(9)
• ata_to_sense_error(9)
• ata_gen_ata_sense(9)
• ata_scsi_dma_need_drain(9)
• ata_scsi_sdev_init(9)
• ata_scsi_sdev_configure(9)
• ata_scsi_sdev_destroy(9)
• ata_scsi_start_stop_xlat(9)
• ata_scsi_flush_xlat(9)
• scsi_6_lba_len(9)
• scsi_10_lba_len(9)
• scsi_16_lba_len(9)
• scsi_dld(9)
• ata_scsi_verify_xlat(9)
• ata_scsi_rw_xlat(9)
• ata_scsi_translate(9)
• ata_scsi_rbuf_fill(9)
• ata_scsiop_inq_00(9)
• ata_scsiop_inq_80(9)
• ata_scsiop_inq_83(9)
• ata_scsiop_inq_89(9)
• ata_dsm_trim_pages(9)
• ata_scsiop_inq_b0(9)
• ata_scsiop_inq_b1(9)
• ata_scsiop_inq_b2(9)
• ata_scsiop_inq_b6(9)
• ata_scsiop_inq_b9(9)
• ata_scsiop_inquiry(9)
• modecpy(9)
• ata_msense_caching(9)
• ata_msense_control(9)
• ata_msense_rw_recovery(9)
• ata_scsiop_mode_sense(9)
• ata_scsiop_read_cap(9)
• ata_scsiop_report_luns(9)
• atapi_xlat(9)
• ata_scsi_find_dev(9)
• ata_scsi_pass_thru(9)
• ata_format_dsm_trim_descr(9)
• ata_scsi_write_same_xlat(9)
• ata_scsiop_maint_in(9)
• ata_scsi_report_zones_complete(9)
• ata_mselect_caching(9)
• ata_mselect_control(9)
• ata_scsi_mode_select_xlat(9)
• ata_scsi_var_len_cdb_xlat(9)
• ata_get_xlat_func(9)
• ata_scsi_simulate(9)
• ata_scsi_queuecmd(9)
• ata_scsi_offline_dev(9)
• ata_scsi_remove_dev(9)
• ata_scsi_media_change_notify(9)
• ata_scsi_hotplug(9)
• ata_scsi_user_scan(9)
• ata_scsi_dev_rescan(9)

💖 bye bestie! this page is from source/version ./drivers/ata, dated October 2026, for ata_scsiop_inq_std(9) — periodt ✨🫶