nrpe_selinux(8)

📦
version 20250627+git412.dbf877ab7 · 7 versions
, in opensuse-leap 16.0

💖 NAME 💖

okay bestie, welcome to nrpe_selinux(8) — the SELinux Policy nrpe manual page for nrpe_selinux, aka the Security Enhanced Linux Policy for the nrpe processes. That's the whole name vibe: SELinux policy for nrpe, periodt 💅

✨ DESCRIPTION ✨

Security-Enhanced Linux secures the nrpe processes via flexible mandatory access control. The nrpe processes execute with the nrpe_t SELinux type. You can check if you have these processes running by executing the ps command with the -Z qualifier.

For example:

ps -eZ | grep nrpe_t

🚪 ENTRYPOINTS 🚪

The nrpe_t SELinux type can be entered via the nrpe_exec_t file type.

The default entrypoint paths for the nrpe_t domain are the following:

/usr/bin/nrpe

👑 PROCESS TYPES 👑

SELinux defines process types (domains) for each process running on the system.

You can see the context of a process using the -Z option to ps.

Policy governs the access confined processes have to files. SELinux nrpe policy is very flexible allowing users to setup their nrpe processes in as secure a method as possible.

The following process types are defined for nrpe:

  • nrpe_t
Note: semanage permissive -a nrpe_t can be used to make the process type nrpe_t permissive. SELinux does not deny access to permissive process types, but the AVC (SELinux denials) messages are still generated.

🎚️ BOOLEANS 🎚️

SELinux policy is customizable based on least access required. nrpe policy is extremely flexible and has several booleans that allow you to manipulate the policy and run nrpe with the tightest access possible.

  • daemons_dontaudit_scheduling — if you want to dontaudit all daemons scheduling requests (setsched, sys_nice), you must turn on this boolean. Enabled by default. slay defaults ✨
setsebool -P daemons_dontaudit_scheduling 1
  • fips_mode — if you want to allow all domains to execute in fips_mode, you must turn on this boolean. Enabled by default.
setsebool -P fips_mode 1
  • nagios_run_sudo — if you want to allow nagios/nrpe to call sudo from NRPE utils scripts, you must turn on this boolean. Disabled by default.
setsebool -P nagios_run_sudo 1
  • nagios_use_nfs — if you want to determine whether Nagios, NRPE can access nfs file systems, you must turn on this boolean. Disabled by default.
setsebool -P nagios_use_nfs 1
  • nis_enabled — if you want to allow system to run with NIS, you must turn on this boolean. Disabled by default.
setsebool -P nis_enabled 1

📂 MANAGED FILES 📂

The SELinux process type nrpe_t can manage files labeled with the following file types. The paths listed are the default paths for these file types. Note the processes UID still need to have DAC permissions.

  • cluster_conf_t — default path:
    • /etc/cluster(/.*)?
  • cluster_var_lib_t — default paths:
    • /var/lib/pcsd(/.*)?
    • /var/lib/cluster(/.*)?
    • /var/lib/openais(/.*)?
    • /var/lib/pengine(/.*)?
    • /var/lib/corosync(/.*)?
    • /usr/lib/heartbeat(/.*)?
    • /var/lib/heartbeat(/.*)?
    • /var/lib/pacemaker(/.*)?
  • cluster_var_run_t — default paths:
    • /run/crm(/.*)?
    • /run/cman_.*
    • /run/rsctmp(/.*)?
    • /run/aisexec.*
    • /run/heartbeat(/.*)?
    • /run/pcsd-ruby.socket
    • /run/corosync-qnetd(/.*)?
    • /run/corosync-qdevice(/.*)?
    • /run/pcsd.socket
    • /run/corosync.pid
    • /run/cpglockd.pid
    • /run/rgmanager.pid
    • /run/cluster/rgmanager.sk
  • faillog_t — default paths:
    • /var/log/btmp.*
    • /run/faillock(/.*)?
    • /var/log/faillog.*
    • /var/log/tallylog.*
  • krb5_host_rcache_t — default paths:
    • /var/tmp/krb5_0.rcache2
    • /var/cache/krb5rcache(/.*)?
    • /var/tmp/nfs_0
    • /var/tmp/DNS_25
    • /var/tmp/host_0
    • /var/tmp/imap_0
    • /var/tmp/HTTP_23
    • /var/tmp/HTTP_48
    • /var/tmp/ldap_55
    • /var/tmp/ldap_487
    • /var/tmp/ldapmap1_0
  • lastlog_t — default paths:
    • /var/log/lastlog.*
    • /var/lib/lastlog(/.*)?
  • nfs_t — no default paths are listed under it here.
  • nrpe_var_run_t — no default paths are listed under it here.
  • root_t — default paths:
    • /sysroot/.aleph-version.json
    • /sysroot/ostree/deploy/.*-atomic/deploy(/.*)?
    • /
    • /initrd
    • /var/lib/ntp
  • security_t — default path:
    • /selinux
  • sudo_db_t — default path:
    • /var/db/sudo(/.*)?

🏷️ FILE CONTEXTS 🏷️

SELinux requires files to have an extended attribute to define the file type.

You can see the context of a file using the -Z option to ls.

Policy governs the access confined processes have to these files. SELinux nrpe policy is very flexible allowing users to setup their nrpe processes in as secure a method as possible.

🎀 STANDARD FILE CONTEXT 🎀

SELinux defines the file context types for the nrpe, if you wanted to store files with these types in a different paths, you need to execute the semanage command to specify alternate labeling and then use restorecon to put the labels on disk.

semanage fcontext -a -t nrpe_exec_t '/srv/nrpe/content(/.*)?'
restorecon -R -v /srv/mynrpe_content
Note: SELinux often uses regular expressions to specify labels that match multiple files.

The following file types are defined for nrpe:

  • nrpe_etc_t — Set files with the nrpe_etc_t type, if you want to store nrpe files in the /etc directories.
  • nrpe_exec_t — Set files with the nrpe_exec_t type, if you want to transition an executable to the nrpe_t domain.
  • nrpe_var_run_t — Set files with the nrpe_var_run_t type, if you want to store the nrpe files under the /run or /var/run directory.
Note: File context can be temporarily modified with the chcon command. If you want to permanently change the file context you need to use the semanage fcontext command. This will modify the SELinux labeling database. You will need to use restorecon to apply the labels.

🛠️ COMMANDS 🛠️

  • semanage fcontext can also be used to manipulate default file context mappings.
  • semanage permissive can also be used to manipulate whether or not a process type is permissive.
  • semanage module can also be used to enable/disable/install/remove policy modules.
  • semanage boolean can also be used to manipulate the booleans.
  • system-config-selinux is a GUI tool available to customize SELinux policy settings.

🖋️ AUTHOR 🖋️

This manual page was auto-generated using sepolicy manpage. iconic, honestly ✨

👀 SEE ALSO 👀

xoxo bestie, this was nrpe_selinux(8) — source/version nrpe, dated 26-10-06, manual nrpe_selinux(8) 💖 slay and stay secure 🦋

📦 where this page comes from