ctdbd_selinux(8)

💖 NAME 💖

ctdbd_selinux — Security Enhanced Linux Policy for the ctdbd processes. Hii bestie, welcome to the ctdbd_selinux(8) page 💅

✨ DESCRIPTION ✨

Security-Enhanced Linux secures the ctdbd processes via flexible mandatory access control. No cap.

The ctdbd processes execute with the ctdbd_t SELinux type. You can check if you have these processes running by executing the ps command with the -Z qualifier.

For example:

ps -eZ | grep ctdbd_t

🚪 ENTRYPOINTS 🚪

The ctdbd_t SELinux type can be entered via the ctdbd_exec_t file type.

The default entrypoint paths for the ctdbd_t domain are the following:

/etc/ctdb/events.d/.*, /usr/bin/ctdbd, /usr/bin/ctdbd_wrapper

🧠 PROCESS TYPES 🧠

SELinux defines process types (domains) for each process running on the system.

You can see the context of a process using the -Z option to ps.

Policy governs the access confined processes have to files. SELinux ctdbd policy is very flexible allowing users to setup their ctdbd processes in as secure a method as possible.

The following process types are defined for ctdbd:

• ctdbd_t

Note: semanage permissive -a ctdbd_t can be used to make the process type ctdbd_t permissive. SELinux does not deny access to permissive process types, but the AVC (SELinux denials) messages are still generated.

🎚️ BOOLEANS 🎚️

SELinux policy is customizable based on least access required. ctdbd policy is extremely flexible and has several booleans that allow you to manipulate the policy and run ctdbd with the tightest access possible.

• If you want to dontaudit all daemons scheduling requests (setsched, sys_nice), you must turn on the daemons_dontaudit_scheduling boolean. Enabled by default.

setsebool -P daemons_dontaudit_scheduling 1

• If you want to allow all domains to execute in fips_mode, you must turn on the fips_mode boolean. Enabled by default.

setsebool -P fips_mode 1

• If you want to allow system to run with NIS, you must turn on the nis_enabled boolean. Disabled by default.

setsebool -P nis_enabled 1

🔌 PORT TYPES 🔌

SELinux defines port types to represent TCP and UDP ports.

You can see the types associated with a port by using the following command:

semanage port -l

Policy governs the access confined processes have to these ports. SELinux ctdbd policy is very flexible allowing users to setup their ctdbd processes in as secure a method as possible.

The following port types are defined for ctdbd:

• ctdb_port_t

Default Defined Ports:

tcp 4379
udp 4379

🗂️ MANAGED FILES 🗂️

The SELinux process type ctdbd_t can manage files labeled with the following file types. The paths listed are the default paths for these file types. Note the processes UID still need to have DAC permissions.

cifs_t

cluster_conf_t

/etc/cluster(/.*)?

cluster_var_lib_t

/var/lib/pcsd(/.*)?
/var/lib/cluster(/.*)?
/var/lib/openais(/.*)?
/var/lib/pengine(/.*)?
/var/lib/corosync(/.*)?
/usr/lib/heartbeat(/.*)?
/var/lib/heartbeat(/.*)?
/var/lib/pacemaker(/.*)?

cluster_var_run_t

/run/crm(/.*)?
/run/cman_.*
/run/rsctmp(/.*)?
/run/aisexec.*
/run/heartbeat(/.*)?
/run/pcsd-ruby.socket
/run/corosync-qnetd(/.*)?
/run/corosync-qdevice(/.*)?
/run/pcsd.socket
/run/corosync.pid
/run/cpglockd.pid
/run/rgmanager.pid
/run/cluster/rgmanager.sk

ctdbd_exec_t

/etc/ctdb/events.d/.*
/usr/bin/ctdbd
/usr/bin/ctdbd_wrapper

ctdbd_spool_t

/var/spool/ctdb(/.*)?

ctdbd_tmp_t

ctdbd_var_lib_t

/var/lib/ctdb(/.*)?
/var/lib/ctdbd(/.*)?

ctdbd_var_run_t

/run/ctdb(/.*)?
/run/ctdbd(/.*)?

ctdbd_var_t

/var/ctdb(/.*)?

ecryptfs_t

/home/[^/]+/.Private(/.*)?
/home/[^/]+/.ecryptfs(/.*)?

fusefs_t

/run/user/[0-9]+/gvfs

krb5_host_rcache_t

/var/tmp/krb5_0.rcache2
/var/cache/krb5rcache(/.*)?
/var/tmp/nfs_0
/var/tmp/DNS_25
/var/tmp/host_0
/var/tmp/imap_0
/var/tmp/HTTP_23
/var/tmp/HTTP_48
/var/tmp/ldap_55
/var/tmp/ldap_487
/var/tmp/ldapmap1_0

nfs_t

root_t

/sysroot/.aleph-version.json
/sysroot/ostree/deploy/.*-atomic/deploy(/.*)?
/
/initrd
/var/lib/ntp

systemd_passwd_var_run_t

/run/systemd/ask-password(/.*)?
/run/systemd/ask-password-block(/.*)?

🏷️ FILE CONTEXTS 🏷️

SELinux requires files to have an extended attribute to define the file type.

You can see the context of a file using the -Z option to ls.

Policy governs the access confined processes have to these files. SELinux ctdbd policy is very flexible allowing users to setup their ctdbd processes in as secure a method as possible.

🪄 EQUIVALENCE DIRECTORIES 🪄

ctdbd policy stores data with multiple different file context types under the /var/lib/ctdb directory. If you would like to store the data in a different directory you can use the semanage command to create an equivalence mapping. If you wanted to store this data under the /srv directory you would execute the following command:

semanage fcontext -a -e /var/lib/ctdb /srv/ctdb
restorecon -R -v /srv/ctdb

📦 STANDARD FILE CONTEXT 📦

SELinux defines the file context types for the ctdbd, if you wanted to store files with these types in a different paths, you need to execute the semanage command to specify alternate labeling and then use restorecon to put the labels on disk.

semanage fcontext -a -t ctdbd_exec_t '/srv/ctdbd/content(/.*)?'
restorecon -R -v /srv/myctdbd_content

Note: SELinux often uses regular expressions to specify labels that match multiple files.

The following file types are defined for ctdbd:

• ctdbd_exec_t — Set files with the ctdbd_exec_t type, if you want to transition an executable to the ctdbd_t domain.

Paths:

/etc/ctdb/events.d/.*, /usr/bin/ctdbd, /usr/bin/ctdbd_wrapper

• ctdbd_initrc_exec_t — Set files with the ctdbd_initrc_exec_t type, if you want to transition an executable to the ctdbd_initrc_t domain.
• ctdbd_log_t — Set files with the ctdbd_log_t type, if you want to treat the data as ctdbd log data, usually stored under the /var/log directory.

Paths:

/var/log/ctdb.log.*, /var/log/log.ctdb.*

• ctdbd_spool_t — Set files with the ctdbd_spool_t type, if you want to store the ctdbd files under the /var/spool directory.
• ctdbd_tmp_t — Set files with the ctdbd_tmp_t type, if you want to store ctdbd temporary files in the /tmp directories.
• ctdbd_var_lib_t — Set files with the ctdbd_var_lib_t type, if you want to store the ctdbd files under the /var/lib directory.

Paths:

/var/lib/ctdb(/.*)?, /var/lib/ctdbd(/.*)?

• ctdbd_var_run_t — Set files with the ctdbd_var_run_t type, if you want to store the ctdbd files under the /run or /var/run directory.

Paths:

/run/ctdb(/.*)?, /run/ctdbd(/.*)?

• ctdbd_var_t — Set files with the ctdbd_var_t type, if you want to store the c files under the /var directory.

Note: File context can be temporarily modified with the chcon command. If you want to permanently change the file context you need to use the semanage fcontext command. This will modify the SELinux labeling database. You will need to use restorecon to apply the labels.

🛠️ COMMANDS 🛠️

• semanage fcontext can also be used to manipulate default file context mappings.
• semanage permissive can also be used to manipulate whether or not a process type is permissive.
• semanage module can also be used to enable/disable/install/remove policy modules.
• semanage port can also be used to manipulate the port definitions
• semanage boolean can also be used to manipulate the booleans
• system-config-selinux is a GUI tool available to customize SELinux policy settings.

👑 AUTHOR 👑

This manual page was auto-generated using sepolicy manpage .

🦋 SEE ALSO 🦋

selinux(8), ctdbd(8), semanage(8), restorecon(8), chcon(1), sepolicy(8), setsebool(8)

---

Okay bestie, that’s the whole ctdbd_selinux(8) page. The footer vibes are: manual name ctdbd_selinux(8), source/version ctdbd, date 26-10-06. Bye 💖✨