HYDRASDR_ASYNC_RX(7)

πŸ“¦ version 1.1.1, in ubuntu stonking

πŸ’– HYDRASDR_ASYNC_RX(7) πŸ’–

okay bestie, pull up a chair 🫢 this is HYDRASDR_ASYNC_RX(7), the manual for hydrasdr_async_rx β€” no cap, your whole personality this afternoon is capturing IQ data and that's iconic of you.


🌸 NAME 🌸

hydrasdr_async_rx β€” HydraSDR Async RX Tool. periodt πŸ’…

✨ DESCRIPTION ✨

She receives data. Into a file. That's the vibe, that's the whole main character arc πŸ’Ύβœ¨

πŸŽ€ USAGE πŸŽ€

hydrasdr_async_rx -o <file> [options]

πŸ‘‘ OPTIONS πŸ‘‘

🚨 Required (do NOT skip her, fr fr)

  • -o <file> β€” the output file where your captured data lands. No -o, no data, we don't make the rules 😭

πŸ¦‹ Optional (the fun little extras)

  • -f <MHz> β€” set RF frequency in MHz (like 100.5 β€” yes queen, decimals are allowed πŸ’œ)
  • -s <SPS> β€” set sample rate
  • -B <Hz> β€” set bandwidth (only if your device supports it, iykyk)
  • -t <type> β€” set sample type:
    • 0 = FloatIQ
    • 1 = FloatReal
    • 2 = Int16IQ
    • 3 = Int16Real
    • 5 = Raw
  • -p <0/1> β€” packing mode: 0=16-bit, 1=12-bit packed (if supported)
  • -P <port> β€” select RF port (0-based index, so the first one is 0, not 1, we're programmers here)
  • -D <0/1> β€” decimation mode: 0=Low Bandwidth (default), 1=High Definition
    • High Definition uses highest HW sample rate with decimation πŸ”₯
  • -h β€” show help

🎚️ Gain control (device-specific, in priority order)

these are all "if supported by your device" coded, so don't come for me if yours is picky πŸ™ˆ

  • -g <value> β€” set linearity gain (if supported)
  • -G <value> β€” set sensitivity gain (if supported)
  • -l <value> β€” set LNA gain (if supported)
  • -r <value> β€” set RF gain (if supported)
  • -m <value> β€” set Mixer gain (if supported)
  • -F <value> β€” set Filter gain (if supported)
  • -v <value> β€” set VGA gain (if supported)
  • -a <0/1> β€” LNA AGC off/on (if supported)
  • -A <0/1> β€” Mixer AGC off/on (if supported)
  • -b <0/1> β€” Bias-T off/on (default: 0)
πŸ’‘ Note: connect a device and run with -h for device-specific defaults and ranges. literally the cheat code, use it πŸ’…

πŸ’œ AUTHORS πŸ’œ

HydraSDR RFOne was primarily written by Benjamin VERNOUX. king behavior, honestly πŸ‘‘

🌈 SEE ALSO 🌈


and that's the whole page, bestie πŸŽ€ this little masterpiece is brought to you by HydraSDR, dated February 2026 β€” go forth, capture data, slay πŸŒΈπŸ¦‹βœ¨

πŸ“¦ where this page comes from