CSV2(5)

📦
version 3.5.0039 · 2 versions
, in fedora 43, fedora 44

💖 NAME 💖

csv2 — the whole entire description of the csv2 zone file that MaraDNS uses. Yep, this is the CSV2(5) page, bestie, and it's a long one, so hydrate. 🥤

🌈 DESCRIPTION 🌈

okay so first things first: the csv2 zone file format is MaraDNS' standard zone file format, periodt. And the way it cuts up fields? It will take any kind of whitespace — space, tab, and carriage return — or the '|' character, to delimit fields. So many options. We love a flexible icon. 💅

🎀 Tilde delimitation 🎀

In newer MaraDNS releases, the tilde ('~') character is used to delimit records in csv2 zone files. But in order to maintain maximum compatibility with older MaraDNS zone files (respecting your elders, honestly iconic behavior), this feature is only enabled if a tilde is placed between the first and second record. Otherwise, tildes are not allowed in zone files — except in comments, where they're always welcome. 🫶

Most older MaraDNS csv2 zone files without the tilde character are compatible with the updated csv2 parser, unless csv2_tilde_handling is set to 3. All older MaraDNS csv2 zone files will parse in MaraDNS if csv2_tilde_handling has a value of 0. Older MaraDNS releases also supported the csv2_tilde_handling variable (as long as it had a value of 0); this allowed the same configuration and zone files to be used in older and newer MaraDNS releases. Backwards compatibility? She ate. ✨

📝 Resource record format 📝

This zone file format has records in the following form:

name [+ttl] [rtype] rdata ~

Let's break that down, because every piece matters:

  • The name is the name of the record we will add, such as "www.example.net.". This must be placed at the beginning of a line.
  • The rtype is the record type for the record, such as "A" (ipv4 IP address), "MX" (mail exchanger), or "AAAA" (ipv6 IP address).
  • The ttl is how long other DNS servers should store this data in their memory (in seconds); this field needs a '+' as its initial character.
  • The rdata is the actual data for this record; the format for the rdata is type-specific.

Anything in square brackets is an optional field. If the ttl is not specified, the ttl is set to the default ttl value (see "Default TTL" below — yes, it's a whole thing). If the rtype is not specified, it is set to be an "A" (ipv4 address) record. Defaults doing the heavy lifting, we stan. 👑

The zone file supports comments; comments are specified by having a '#' anywhere between fields or records. When a '#' is seen, the csv2 parser ignores any character it sees (with the exception of the '{', which is not allowed in comments) until a newline. A '#' can usually be placed inside a field, and indicates the end of a field when placed there.

A '{' character can never be placed in a comment. A '~' character is always allowed in a comment, and has no special meaning when placed in a comment. No cap.

The following record types are supported; a description of the record data format accommodates the record type. So basically, each one gets its own little moment. 🌟

🅰️ A

An A record stores an ipv4 address. This is the default record type should the record type not be specified. This record type has one field in it: the IP for the record. Examples:

a.example.net.              10.11.12.13 ~
b.example.net.        A     10.11.12.14 ~
c.example.net. +64000 A     10.11.12.15 ~

🔄 PTR

A PTR record stores the name for a given ipv4 or ipv6 address, and is used for reverse DNS lookups. This record type has one field in it: the name for the record in question. Examples:

13.12.11.10.in-addr.arpa.        PTR    a.example.net. ~
14.12.11.10.in-addr.arpa.        PTR    b.example.net. ~
15.12.11.10.in-addr.arpa. +64000 PTR    c.example.net. ~

📬 MX

An MX record stores a mail exchange record, and is used for mail delivery. This record type has two fields in it: the priority (or "preference" in traditional DNS parlance) of the MX record — lower numbers get higher priority, bestie — and the name of the mail exchanger.

Example of mail for example.net being mailed to mail.example.net, which has the IP "10.11.12.16":

example.net.      MX   10 mail.example.net. ~
mail.example.net.      10.11.12.16 ~

🌐 AAAA

An AAAA record stores the ipv6 address for a given name. The IP is in standard ipv6 "colon delimited" format: eight 16-bit hexadecimal numbers are separated by colons. Two colons together indicate multiple streams of all-zero hex numbers. This record has only one field: the v6 IP. Example:

a.example.net.   AAAA    2001:db8:dec:ade::f ~

🛎️ SRV

An SRV record stores a "service" definition. This record has four fields: priority, weight, port, and target. For more information, please refer to RFC 2782. Example:

_http._tcp.% SRV 0 0 80 a.% ~

🧭 NAPTR

A NAPTR record is described in RFC 2915. Example:

www.example.com. NAPTR 100 100 's';'http+I2R';'' _http._tcp.example.com. ~

Note the semicolons. Because of a bug in MaraDNS 1.4.03 and earlier releases, NAPTR records will not parse unless a ~ is not used to separate records; a patch to fix this bug is available. (Bug alert, handle with care. 🐛)

🏰 NS

An NS record specifies the name servers for a given zone. If the name servers are not delegation name servers (in other words, if the name servers are the authoritative name servers for the zone), they need to be at the beginning of the zone, either as the first records in the zone, or right after the SOA record. The NS records are optional; if not present, MaraDNS will make an educated guess of that NS records should be there, based on the IPs the MaraDNS process is bound to. This record has one field: the name of the name server machine. Example:

example.net.    NS    ns1.example.net. ~
example.net.    NS    ns2.example.net. ~

👑 SOA

An SOA record stores the start of authority for a given zone file. This record is optional in a CSV2 zone file; should the record not be in the zone file, MaraDNS will synthesize an appropriate SOA record. This record can only exist once in a zone file: as the first record of the zone file. This record has seven fields: the name of the zone, the email address of the person responsible for the zone, and five numeric fields (serial, refresh, retry, expire, and minimum). Note that the SOA minimum does not affect other TTLs in MaraDNS. Example:

x.org. SOA x.org. email@x.org. 1 7200 3600 604800 1800 ~

If there is a '.' (dot) character in the part of the email address before the '@', it needs to be escaped thusly:

x.org. SOA x.org. john\.doe@x.org. 1 7200 3600 604800 1800 ~

Note that the csv2 parser will not allow more than one dot in a row; 'john\.\.doe@x.org' will cause a parse error. In addition, the dot character must be escaped with a backslash. So don't try it. 🙈

The serial numeric field may be replaced by the string '/serial'; this string tells the CSV2 zone parser to synthesize a serial number for the zone based on the timestamp for the zone file. This allows one to have the serial number be automatically updated whenever the zone file is edited. Here is how this special field looks in a SOA record:

x.org. SOA x.org. email@x.org. /serial 7200 3600 604800 1800 ~

The '/serial' string is case-sensitive; only '/serial' in all lower case will parse. lowercase only, she's picky like that. 💅

💬 TXT

A TXT record stores arbitrary text and/or binary data for a given host name. This record has one field: the text data for the record.

A basic text record can be stored by placing ASCII data between two single quotes, as follows:

example.com. TXT 'This is an example text field' ~

Any binary data can be specified; see the csv2_txt(5) manual page for full details.

If tildes are used to separate records, a TXT record can not contain a literal '|' (pipe) character, a '#' literal, a '~' literal, nor any ASCII control literal; these characters can be added to a TXT record via the use of escape sequences; read the csv2_txt man page for details.

📧 SPF

A SPF record is, with the exception of the numeric rtype, identical to a TXT record. SPF records are designed to make it more difficult to forge email.

Here is one example SPF record:

example.com. SPF 'v=spf1 +mx a:colo.example.com/28 -all' ~

Use '\x7e' to put a tilde ("~" character) in a SPF record:

example.com. SPF 'v=spf1 +mx a:colo.example.com/28 '\x7e'all' ~

More information about SPF records can be found in RFC4408, or by performing a web search for 'sender policy framework'.

Note that SPF records never gained traction, and their role is handled by TXT records. (RIP to a trend that didn't pop off. 😭)

🧪 RAW

The RAW record is a special meta-record that allows any otherwise unsupported record type to be stored in a csv2 zone file. The syntax is:

RAW [numeric rtype] [data] ~

The numeric rtype is a decimal number.

The data field can, among other thing, have backslashed hex sequences outside of quotes, concatenated by ASCII data inside quotes, such as the following example:

example.com. RAW 40 \x10\x01\x02'Kitchen sink'\x40' data' ~

The above example is a "Kitchen Sink" RR with a "meaning" of 16, a "coding" of 1, a "subcoding" of 2, and a data string of "Kitchen sink@ data" (since hex code 40 corresponds to a @ in ASCII). Note that unquoted hex sequences are concatenated with quoted ASCII data, and that spaces are only inside quoted data.

The format for a data field in a RAW record is almost identical to the format for a TXT data field. Both formats are described in full in the csv2_txt(5) manual page.

🪞 FQDN4

The FQDN4 (short for "Fully Qualified Domain Name for IPv4") record is a special form of the "A" record (see above) that instructs MaraDNS to automatically create the corresponding PTR record. For example, the following is one way of setting up the reverse DNS lookup for x.example.net:

x.example.net. A 10.3.28.79 ~
79.28.3.10.in-addr.arpa. PTR x.example.net. ~

But the above two lines in a zone file can also be represented thusly:

x.example.net. FQDN4 10.3.28.79 ~

Note that the csv2 parser does not bother to check that any given IP only has a single FQDN4 record; it is up to the DNS administrator to ensure that a given IP has only one FQDN4 record. In the case of there being multiple FQDN4 records with the same IP, MaraDNS will have multiple entries in the corresponding PTR record, which is usually not the desired behavior. So pls be careful. 🫠

FQDN4 records are not permitted in a csv2_default_zonefile. If you do not know what a csv2_default_zonefile is, you do not have to worry about this limitation. Lucky you. 🍓

🪄 FQDN6

The FQDN6 (short for "Fully Qualified Domain Name for IPv6") record is the ipv6 form for the FQDN4 record. Like the FQDN4 record, this record creates both a "forward" and "reverse" DNS record for a given host name. For example, one may have:

x.example.net. AAAA 2001:db8:dec:ade::b:c:d ~
d.0.0.0.c.0.0.0.b.0.0.0.0.0.0.0.e.d.a.0.c.e.d.0.8.b.d.0.1.0.0.2 PTR
x.example.net. ~

But the above two lines in a zone file can also be represented thusly:

x.example.net. FQDN6 2001:db8:dec:ade::b:c:d ~

Like FQDN4 records, it is the DNS administrator's duty to make sure only a single IP has a FQDN6 record.

FQDN6 records are, like FQDN4 records, not permitted in a csv2_default_zonefile. If you do not know what a csv2_default_zonefile is, you do not have to worry about this limitation. Same energy as before. 🌈

FQDN6 records were implemented by Jean-Jacques Sarton. iconic of him honestly 💖

CNAME

Okay so a CNAME record is basically a pointer to another host name. In MaraDNS, the CNAME record affects any record type not already specified for a given host name. Now, MaraDNS does let CNAME and non-CNAME records share the same host name, but bestie… that's considered bad practice and it's not compatible with some other DNS servers. So like, you can, but why 😭

🚨 CNAME records are not permitted in a csv2_default_zonefile. If you don't know what a csv2_default_zonefile is, this fact is of no relevance to you. no cap.

Historical and uncommon resource records

The following resource records are mainly of historical interest, or are just not commonly used. It's giving vintage. 🦋

HINFO

💀 In light of RFC8482, using this record type is strongly discouraged.

An HINFO record is a description of the CPU (processor) and the OS that a given host is using. The format is identical to a TXT record, except the field must have precisely two chunks.

  • First chunk = the CPU the host is running
  • Second chunk = the OS the host is running

Example:

example.com. HINFO 'Intel Pentium III';'CentOS Linux 3.7' ~

This resource record is not actively used — the IANA has a list of CPUs and OSes that this record is supposed to have, but that list has not been updated since 2002. it's giving dusty ✨

Since MaraDNS has support for RFC8482, ANY queries sent to MaraDNS will return an HINFO record with a CPU of "RFC8482" and a blank OS name. slay, I guess 💅

WKS

WKS records are historical records which have been superseded by SRV records. The format is: an IP, followed by a protocol number (6 means TCP), followed by a list of ports that a given server has available for services.

For example, to advertise that example.net has the IP 10.1.2.3, and has a SSH, HTTP (web), and NNTP server:

example.net. WKS 10.1.2.3 6 22,80,119 ~

MaraDNS only allows up to 10 different port numbers in a WKS record, and requires that the listed port numbers not be higher than 1023.

MD and MF

MD and MF records are RR types that existed before MX records, and were made obsolete by MX records. RFC1035 says that a DNS server can either reject these records or convert them into MX records. BIND rejects these records; MaraDNS converts them. different breed fr 🫶

Example:

example.net. MD a.example.net. ~
example.net. MF b.example.net. ~

Is equivalent to:

example.net. MX 0 a.example.net. ~
example.net. MX 10 b.example.net. ~

MB, MG, MINFO, and MR

In the late 1980s, an alternative to MX records was proposed. This alternative utilized MB, MG, MINFO, and MR records. This alternative failed to gather popularity. However, these records were codified in RFC1035, and are supported by MaraDNS. Here's what they look like:

example.net. MB mail.example.net. ~
example.net. MG mg@example.net. ~
example.net. MINFO rm@example.net. re@example.net. ~
example.net. MR mr@example.net. ~

More information about these records can be found in RFC1035.

AFSDB, RP, X25, ISDN, and RT

AFSDB, RP, X25, ISDN, and RT are resource records which were proposed in RFC1183. None of these resource records are widely used. lowkey forgotten 😔

With the exception of the ISDN record, the format of these records is identical to the examples in RFC1183. The format of the ISDN record is identical unless the record has a subaddress (SA). If an ISDN record has a subaddress, it is separated from the ISDN-address by a ; instead of whitespace.

If used, here is how the records would look in a csv2 zone file:

example.net. AFSDB 1 afsdb.example.net. ~
example.net. RP rp@example.net. rp.example.net. ~
example.net. RP rp2@example.net. . ~
example.net. X25 311061700956 ~
example.net. ISDN 150862028003217 ~
example.net. ISDN 150862028003217;004 ~
example.net. RT 10 relay.example.net. ~

NSAP and NSAP-PTR

NSAP and NSAP-PTR records were proposed in RFC1706. A NSAP record is a hexadecimal number preceded by the string "0x" and with optional dots between bytes. This hexadecimal number is converted into a binary number by MaraDNS. A NSAP-PTR record is identical to a PTR record, but has a different RTYPE.

More information about these records can be obtained from RFC1706.

If used, here is how the records would look in a csv2 zone file:

example.net. NSAP 0x47.0005.80.005a00.0000.0001.e133.ffffff000162.00 ~
example.net. NSAP-PTR nsap.example.net. ~

PX

The PX RR is an obscure RR described in RFC2163. A PX record looks like this in a CSV2 zone file:

example.net. PX 15 px1.example.net. px2.example.net. ~

GPOS

An GPOS record is a description of the location of a given server. The format for this record is identical to a TXT record, except the field must have precisely three chunks.

  • First chunk = the longitude
  • Second chunk = the latitude
  • Third chunk = the altitude (in meters)

Example:

example.net. GPOS '-98.6502';'19.283';'2134' ~

More information about this record can be found in RFC1712.

This resource record is not actively used — for the relatively few people who encode their position in DNS, the LOC record is far more common. it's giving niche 💀

LOC

The LOC resource record is an uncommonly used resource record that describes the position of a given server. LOC records are described in RFC1876.

⚠️ Heads up bestie, three very specific things: - MaraDNS' LOC parser assumes that the altitude, size, horizontal, and vertical precision numbers are always expressed in meters. - Sub-meter values for size, horizontal, and vertical precision are not allowed. - Additionally, the altitude can not be greater than 21374836.47 meters.

Example:

example.net. LOC 19 31 2.123 N 98 3 4 W 2000m 2m 4m 567m ~

CAA

MaraDNS does not have direct support for CAA records. However, the RAW record type can generate CAA records. For example, to have "example.com" have a CAA record with the value of "issue letsencrypt.org":

example.com. RAW 257 \x00\x05'issueletsencrypt.org' ~

🌟 STAR RECORDS 🌟

MaraDNS has support for star records in zone files:

*.example.net.  A        10.11.12.13 ~

In this example, anything.example.net will have the IP 10.11.12.13. Note that this does not set the ip for "example.net", which needs a separate record:

example.net.  A                 10.11.12.13 ~

Note also that stars must be at the beginning of a name; to have stars at the end of a name, use the csv2_default_zonefile feature as described in the mararc man page. iykyk ✨

💯 PERCENT SYMBOL 💯

Placing the percent symbol at the end of a record indicates that the percent should be replaced with the domain name for the zone. so cute, so convenient 🎀

For example, in the zone for example.net. (e.g. one's mararc file has csv2["example.net."] = "db.example.net", and we are editing the "db.example.net" file):

www.%     A    10.10.10.10 ~

This will cause "www.example.net" to have the ip 10.10.10.10. periodt. 💅

💅 SLASH COMMANDS 💅

okay so bestie, csv2 zone files aren't just records and comments — they also have these special little slash commands ✨ and honestly they're kind of iconic. but here's the tea: with the one exception of the /serial slash command (go peep "SOA" above 👀), you can ONLY put these where the name for a record would go. just like resource records, you slap a tilde after the slash command. and — super important — slash commands are case-sensitive, and the command has to be in all-lower-case. no yelling. periodt.

these commands are as follows:

🕐 Default TTL 🕐

the default TTL is literally just the TTL that a resource record gets when it didn't specify its own. you can change it with the /ttl slash command. this command takes only a single argument: the time, in seconds, for the new default TTL. and the /ttl slash command only affects the TTL of records that come after the command, okay? a zone file can have multiple /ttl slash commands. slay.

the default TTL is 86400 seconds (one day) until changed by the /ttl slash command.

in the following example, a.ttl.example.com will have a TTL of 86400 seconds (as long as the zone file with this record has not previously used the /ttl slash command), b.ttl.example.com and d.ttl.example.com will have a TTL of 3600 seconds, c.ttl.example.com will have a TTL of 9600 seconds, and e.ttl.example.com will have a TTL of 7200 seconds:

a.ttl.example.com.       10.0.0.1 ~
/ttl 3600 ~
b.ttl.example.com.       10.0.0.2 ~
c.ttl.example.com. +9600 10.0.0.3 ~
d.ttl.example.com.       10.0.0.4 ~
/ttl 7200 ~
e.ttl.example.com.       10.0.0.5 ~

🌍 Origin 🌍

you can change the host name suffix that's used to substitute the percent in a csv2 zone file 💖 this suffix is called, for historical and compatibility reasons, "origin" (iykyk). you do this with the /origin slash command, and it takes the new origin as the one argument to this function. now listen — changing the origin does not change the domain suffix used to determine whether a given domain name is authoritative. don't get it twisted, bestie.

here's one example usage of the /origin slash command:

/origin example.com. ~
www.% 10.1.0.1 ~
% MX 10 mail.% ~
mail.% 10.1.0.2 ~
/origin example.org. ~
www.% 10.2.0.1 ~
% MX 10 mail.% ~
mail.% 10.2.0.2 ~

which is equivalent to:

www.example.com. 10.1.0.1 ~
example.com. MX 10 mail.example.com. ~
mail.example.com. 10.1.0.2 ~
www.example.org. 10.2.0.1 ~
example.org. MX 10 mail.example.org. ~
mail.example.org. 10.2.0.2 ~

and you can also make the current origin be part of the new origin:

/origin example.com. ~
% 10.3.2.1 ~ # example.com now has IP 10.3.2.1
/origin mail.% ~
% 10.3.2.2 ~ # mail.example.com now has IP 10.3.2.2

🥞 Opush and Opop 🥞

the /opush and /opop slash commands use a stack to remember and later recall values for the origin (see origin above 👆). the /opush command is used just like the /origin command; however, the current origin gets placed on a stack instead of discarded. the /opop command removes ("pops") the top element from this stack and makes that element the origin. stack girlies, rise 🙌

for example:

/origin example.com. ~
/opush mail.% ~ # origin is now mail.example.com; example.com is on stack
a.% 10.4.0.1 ~ # a.mail.example.com has IP 10.4.0.1
/opush web.example.com. ~ # mail.example.com and example.com are on stack
a.% 10.5.0.1 ~ # a.web.example.com has IP 10.5.0.1
b.% 10.5.0.2 ~ # b.web.example.com has IP 10.5.0.2
/opop ~ # origin is now mail.example.com again
b.% 10.4.0.2 ~ # b.mail.example.com has IP 10.4.0.2
/opop ~ # origin is now example.com
% MX 10 a.mail.% ~ # example.com. MX 10 a.mail.example.com.
% MX 20 b.mail.% ~ # example.com. MX 20 b.mail.example.com.

the opush/opop stack can have up to seven elements on it. seven. that's the limit, bestie 🫶

📖 Read 📖

the /read slash commands allows one to have the contents of another file in a zone. the /read command takes a single argument: a filename that one wishes to read. the filename is only allowed to have letters, numbers, the - character, the _ character, and the . character in it. that's it, that's the whole guest list, nobody else gets in.

the file needs to be in the same directory as the zone file. the file will be read with the same privileges as the zone file; content in the file should come from a trusted source or be controlled by the system administrator. 🔐

let us suppose that we have the following in a zone file:

mail.foo.example.com. 10.3.2.1 ~
/read foo ~
foo.example.com. MX 10 mail.foo.example.com. ~

and a file foo with the following contents:

foo.example.com. 10.1.2.3 ~
foo.example.com. TXT 'Foomatic!' ~

then foo.example.com will have an A record with the value 10.1.2.3, a TXT value of 'Foomatic!', and a MX record with priority 10 pointing to mail.foo.example.com. mail.foo.example.com will have the IP 10.3.2.1.

note that no pre-processing nor post-processing of the origin is done by the /read command; should the file read change the origin, this changed value will affect any records after the /read command. for example, let us suppose db.example.com looks like this:

/origin foo.example.com. ~
% TXT 'Foomatic!' ~
/read foo ~
% MX 10 mail.foo.example.com. ~

and the file foo looks like this:

% 10.1.2.3 ~
/origin mail.% ~
% 10.3.2.1 ~

then the following records will be created:

foo.example.com.      TXT   'Foomatic!' ~
foo.example.com.      A     10.1.2.3 ~
mail.foo.example.com. A     10.3.2.1 ~
mail.foo.example.com. MX 10 mail.foo.example.com. ~

to have something that works like $INCLUDE filename in a RFC1035 master file, do the following:

/opush % ~
/read filename ~
/opop ~

or, for that matter, the equivalent of $INCLUDE filename neworigin:

/opush neworigin. ~
/read filename ~
/opop ~

🌈 EXAMPLE ZONE FILE 🌈

gather round, here's a whole zone file to vibe with 👑

# This is an example csv2 zone file

# First of all, csv2 zone files do not need an SOA record; however, if
# one is provided, we will make it the SOA record for our zone
# The SOA record needs to be the first record in the zone if provided
# This is a commented out record and disabled.

#%   SOA  % email@% 1 7200 3600 604800 1800 ~

# Second of all, csv2 zone files do not need authoritative NS records.
# If they aren't there, MaraDNS will synthesize them, based on the IP
# addresses MaraDNS is bound to.  (She's pretty smart about this; if
# Mara is bound to both public and private IPs, only the public IPs will
# be synthesized as NS records)

#%   NS   a.% ~
#%   NS   b.% ~

# Here are some A (ipv4 address) records; since this is the most
# common field, the zone file format allows a compact representation
# of it.
a.example.net.      10.10.10.10 ~
# Here, you can see that a single name, "b.example.net." has multiple IPs
# This can be used as a primitive form of load balancing; MaraDNS will
# rotate the IPs so that first IP seen by a DNS client changes every time
# a query for "b.example.net." is made
b.example.net.  10.10.10.11 ~
b.example.net.  10.10.10.12 ~

# We can have the label in either case; it makes no difference
Z.EXAMPLE.NET.      10.2.3.4 ~
Y.EXAMPLE.net.  10.3.4.5 ~

# We can use the percent shortcut.  When the percent shortcut is present,
# it indicates that the name in question should terminate with the name
# of the zone we are processing.
percent.% a         10.9.8.7 ~

# And we can have star records
#*.example.net.  A       10.11.12.13 ~

# We can have a ttl in a record; however the ttl needs a '+' before it:
# Note that the ttl has to be in seconds, and is before the RTYPE
d.example.net. +86400 A 10.11.12.13 ~

f.example.net. # As you can see, records can span multiple lines
             A    10.2.19.83 ~

# This allows well-commented records, like this:
c.example.net.           # Our C class machine
        +86400    # This record is stored for one day
        A         # A record
        10.1.1.1  # Where we are
        ~               # End of record

# We can even have something similar to csv1 if we want...
e.example.net.|+86400|a|10.2.3.4|~
h.example.net.|a|10.9.8.7|~
# Here, we see we can specify the ttl but not the rtype if desired
g.example.net.|+86400|10.11.9.8|~

# Here is a MX record
# Note that "IN" is a pseudo-RR which means to ignore the RR type and
# look at the next RR type in the zone file; this allows MaraDNS zone
# files to look more like BIND zone files.
% mx 10 mail.% ~
mail.% +86400 IN A 10.22.23.24 ~

# We even have a bit of ipv6 support
a.example.net.           aaaa      2001:db8:1:2::3:f ~

# Not to mention support for SRV records
_http._tcp.%    srv   0 0 80 a.% ~

# TXT records, naturally
example.net.    txt 'This is some text' ~

# Starting with MaraDNS 1.2.08, there is also support for SPF records,
# which are identical to TXT records.  See RFC4408 for more details.
example.net.    spf 'v=spf1 +mx a:colo.example.com/28 -all' ~

okay this part is not cute and we are NOT playing, bestie. the lawyers wrote this one and it stays exactly like this, all caps and everything 😭

THIS SOFTWARE IS PROVIDED BY THE AUTHORS ''AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHORS OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

💖 AUTHOR 💖

Sam Trenholme http://www.samiam.org/ — the moment, the icon, the legend 👑

and that's the whole page, bestie 🎀 this lil' slice of the MARADNS manual is the January 2007 edition of CSV2(5) — go forth and write the most well-commented zone file of your life 💅✨

📦 where this page comes from