Pod::SAX(3pm)

🌸 Pod::SAX(3pm) — a SAX parser for Pod 🌸

okay bestie, sit down, grab your boba, because this one is a whole vibe. Pod::SAX is a SAX parser for Pod — it's giving "turn your boring old docs into ✨events✨". We're in the User Contributed Perl Documentation section of the manual, and honestly? iconic. 💅

---

✨ SYNOPSIS ✨

  my $h = XML::SAX::Writer->new();
  my $p = Pod::SAX->new( Handler => $h );
  $p->parse_uri('perlpodspec.pod');

that's it. that's the whole main character moment. 🫶

---

💖 DESCRIPTION 💖

So like, very simply, this module parses POD (or perl) files and turns the Plain Old Documentation into SAX events (which, ngl, you'll often use to turn into XML, but bestie there are other uses as well). 🌈

The aim of this module is not round-tripping, so some things may be lost in the conversion. 😭 The aim is to be as standards compliant as possible, while giving you very simple access to the data. periodt.

The main motivation for this module though was simple standards compliance — all the Pod parsers out there seem to have their own unique way of doing things (🙈 the audacity), and so my aim was to unify that and allow the flexibility that SAX gives me at the same time.

For an introduction to SAX, please read XML::SAX::Intro. ✨

One very important point to note is that just because this is a SAX module it doesn't mandate that the results are XML. You could just as easily use this module to extract all filenames from a POD file, or extract custom =for/=begin sections. And because it uses standardised interfaces this is a lot simpler than working with any other POD parser out there, and the knowledge is transferrable. 💅

---

👑 API 👑

new()

To construct a parser simply call new(). It is customary to pass in the handler object that will receive the SAX events at this time, though you do not have to:

  my $parser = Pod::SAX->new(Handler => $h);

You can re-use this parser object multiple times. It's possible to change the handler at a later date using "$parser-"set_handler()>. This and many other API calls are documented in XML::SAX::Base, which this module inherits from. 🧚

parse()

This method is an auto-detecting parser — it will try and figure out what you passed to it (a string, a file handle or a filename) and parse the data using the appropriate technique. 🔍 it's giving psychic, but make it code.

parse_file(), parse_string(), parse_uri(), parse_fh()

These are simply the non-detecting methods that parse() uses internally. Use these if you are paranoid about what you're parsing, and don't want the overhead of SAX trying to guess. 🎀

---

🦋 XML Format 🦋

The XML format is intended to be simple and map fairly closely to the source POD. The documentation here shows the POD marker and the tag that it maps to. 💖

=pod (or any other way to begin the document)

<pod>
<!-- Pod::SAX v0.14, using POD::Parser v1.13 -->

The comment is automatically generated so that you can see what version of Pod::SAX was used in parsing this document. The closing </pod> tag is generated when the end of the POD is reached. ✨

=head1 and =headN

<head1>Text here</head1>

All head levels are supported. 👑

Paragraphs

Plain paragraphs are represented with:

<para>text</para>

Verbatim

Verbatim sections (i.e. when you indent the text) are represented with:

<verbatim>text</verbatim>

=over/=back

Pod::SAX automatically detects whether a list is itemized or ordered (i.e. whether it should have bullet points or numbers), and so =over/=back are represented by:

<itemizedlist>  </itemizedlist>

and

<orderedlist>   </orderedlist>

respectively. The indent value (as in "=over 4") is saved in the "indent_width" attribute, although for most purposes this can be ignored. 🍓

=item

For both bulleted and numbered lists, the =item tag always maps to:

<listitem>text</listitem>

If a paragraph follows an =item tag (and occurs before any =back) then the paragraph is included immediately after the tag, so for example:

=item foo

Some text about foo

Maps to:

<listitem>foo
  <para>Some text about foo</para>
</listitem>

=begin foo

And "=for foo" (the two are semantically equivalent in Pod) 💫

<markup type="foo" ordinary_paragraph="0">text here</markup>

If the markup section is meant for ordinary processing (see the perlpodspec section on "About Data Paragraphs and "=begin/=end" Regions"), which means the type name begins with a colon as in:

=begin :biblio

Then the markup produced indicates that using:

<markup type="biblio" ordinary_paragraph="1"/>

And the parser will expand all interior Pod commands as it should. 🌸

Note: There is no special treatment of =begin html or =begin XML or any variant thereof. The contents of those markers will simply be treated as text, and it is up to the user of this module to parse that data as XML if they wish to do so. 💀 no freebies here.

Sequences or Formatting Codes

Sequences in POD consist of the following:

L<> - Links
E<> - Entities
I<> - Italics
B<> - Bold
C<> - Code
F<> - Filename
S<> - Non breaking space
X<> - Index marker
Z<> - Null

Most sequences are simply converted to tags of the same name, case preserved:

<B>This is bold text</B> and also <I>some text in italics</I>.

Special treatment is given to the L<>, E<> and S<> tags only. 💅

Links

Links in Pod are... funky. 🫠

Parsing links is really hard, so don't expect that I've got this right. Basically though you've got this mapping:

L<foo/bar>
 => <link type="pod" page="foo" section="bar">foo</link>

L<Some Foo|foo>
 => <link type="pod" page="foo" section="">Some Foo</link>

L<select(3)>
 => <link type="man" page="select(3)" section="">select(3)</link>

L<http://foo.com>
 => <xlink href="http://foo.com">http://foo.com</xlink>

And many variations thereof! Basically it should do the right thing. ✨

Entities

In POD an E<> marker defines an entity. In pod these are single characters only, and take either a text form, in which case they map to the standard HTML entities (e.g. ouml, Agrave etc), or a decimal number in which case they map to the unicode character at that code point. 🔢

In Pod::SAX entities are always converted to unicode and never generate any tags or markers in the data stream, so it will be as though the entity was never there. 🙈 (sneaky little thing)

Non-Breaking Space

Non breaking space is simply achieved by changing all space within the S<> section into the unicode codepoint 160 — the non-breaking space character. Normally this is enough to do the right thing, but if you need to you can detect this with a regexp. 🎀

---

🌟 AUTHOR 🌟

Matt Sergeant, matt@sergeant.org. Copyright AxKit.com Ltd 2002

---

💀 BUGS 💀

There may be bugs in the unicode handling on perl 5.8, because it's just really hard to get things right on 5.8 when dealing with unicode. :-)

---

📜 LICENSE 📜

This is free software. You may use it and redistribute it under the same terms as Perl itself. 🫶

---

and that's the whole page bestie, no cap. this one came from the User Contributed Perl Documentation, built with perl v5.30.0, dated 2020-05-17, and it's filed under Pod::SAX(3pm). go forth and parse, you absolute icon. 💖✨🎀