Catalys...tication(3)

🎀 NAME 🎀

Catalyst::Manual::Tutorial::05_Authentication(3) — from the User Contributed Perl Documentation collection — Catalyst Tutorial - Chapter 5: Authentication.

okay so bestie, this is the chapter where we finally give the app a whole identity situation 💅✨

---

🌈 OVERVIEW 🌈

This is Chapter 5 of 10 for the Catalyst tutorial. Like, chapter five out of ten — we're deep in it now, no cap.

📚 Tutorial Overview 📚

1. Introduction
2. Catalyst Basics
3. More Catalyst Basics
4. Basic CRUD
5. 05_Authentication
6. Authorization
7. Debugging
8. Testing
9. Advanced CRUD
10. Appendices

---

💖 DESCRIPTION 💖

Now that we finally have a simple yet functional application, we can focus on providing authentication (with authorization coming next in Chapter 6). This chapter of the tutorial is divided into two main sections: 1) basic, cleartext authentication and 2) hash-based authentication.

Source code for the tutorial is included in the /home/catalyst/Final directory of the Tutorial Virtual machine (one subdirectory per chapter). There are also instructions for downloading the code in Catalyst::Manual::Tutorial::01_Intro.

---

🔥 BASIC AUTHENTICATION 🔥

This section explores how to add authentication logic to a Catalyst application. Literally the main character moment of this chapter 🫶

🎀 Add Users and Roles to the Database 🎀

First, we add both user and role information to the database (we will add the role information here although it will not be used until the authorization section, Chapter 6). Create a new SQL script file by opening myapp02.sql in your editor and insert:

--
-- Add users and role tables, along with a many-to-many join table
--
PRAGMA foreign_keys = ON;
CREATE TABLE users (
    id            INTEGER PRIMARY KEY,
    username      TEXT,
    password      TEXT,
    email_address TEXT,
    first_name    TEXT,
    last_name     TEXT,
    active        INTEGER
);
CREATE TABLE role (
    id   INTEGER PRIMARY KEY,
    role TEXT
);
CREATE TABLE user_role (
    user_id INTEGER REFERENCES users(id) ON DELETE CASCADE ON UPDATE CASCADE,
    role_id INTEGER REFERENCES role(id) ON DELETE CASCADE ON UPDATE CASCADE,
    PRIMARY KEY (user_id, role_id)
);
--
-- Load up some initial test data
--
INSERT INTO users VALUES (1, 'test01', 'mypass', 't01@na.com', 'Joe',  'Blow', 1);
INSERT INTO users VALUES (2, 'test02', 'mypass', 't02@na.com', 'Jane', 'Doe',  1);
INSERT INTO users VALUES (3, 'test03', 'mypass', 't03@na.com', 'No',   'Go',   0);
INSERT INTO role VALUES (1, 'user');
INSERT INTO role VALUES (2, 'admin');
INSERT INTO user_role VALUES (1, 1);
INSERT INTO user_role VALUES (1, 2);
INSERT INTO user_role VALUES (2, 1);
INSERT INTO user_role VALUES (3, 1);

Then load this into the myapp.db database with the following command:

$ sqlite3 myapp.db < myapp02.sql

🦋 Add User and Role Information to DBIC Schema 🦋

Although we could manually edit the DBIC schema information to include the new tables added in the previous step, let's use the "create=static" option on the DBIC model helper to do most of the work for us:

$ script/myapp_create.pl model DB DBIC::Schema MyApp::Schema \
    create=static components=TimeStamp dbi:SQLite:myapp.db \
    on_connect_do="PRAGMA foreign_keys = ON"
 exists "/home/catalyst/dev/MyApp/script/../lib/MyApp/Model"
 exists "/home/catalyst/dev/MyApp/script/../t"
Dumping manual schema for MyApp::Schema to directory /home/catalyst/dev/MyApp/script/../lib ...
Schema dump completed.
 exists "/home/catalyst/dev/MyApp/script/../lib/MyApp/Model/DB.pm"
$
$ ls lib/MyApp/Schema/Result
Author.pm  BookAuthor.pm  Book.pm  Role.pm  User.pm  UserRole.pm

Notice how the helper has added three new table-specific Result Source files to the lib/MyApp/Schema/Result directory. And, more importantly, even if there were changes to the existing result source files, those changes would have only been written above the "# DO NOT MODIFY THIS OR ANYTHING ABOVE!" comment and your hand-edited enhancements would have been preserved.

Speaking of "hand-edited enhancements," we should now add the "many_to_many" relationship information to the User Result Source file. As with the Book, BookAuthor, and Author files in Chapter 3, DBIx::Class::Schema::Loader has automatically created the "has_many" and "belongs_to" relationships for the new User, UserRole, and Role tables. However, as a convenience for mapping Users to their assigned roles (see Chapter 6), we will also manually add a "many_to_many" relationship. Edit lib/MyApp/Schema/Result/User.pm add the following information between the "# DO NOT MODIFY THIS OR ANYTHING ABOVE!" comment and the closing "1;":

# many_to_many():
#   args:
#     1) Name of relationship, DBIC will create accessor with this name
#     2) Name of has_many() relationship this many_to_many() is shortcut for
#     3) Name of belongs_to() relationship in model class of has_many() above
#   You must already have the has_many() defined to use a many_to_many().
__PACKAGE__->many_to_many(roles => 'user_roles', 'role');

The code for this update is obviously very similar to the edits we made to the "Book" and "Author" classes created in Chapter 3 with one exception: we only defined the "many_to_many" relationship in one direction. Whereas we felt that we would want to map Authors to Books AND Books to Authors, here we are only adding the convenience "many_to_many" in the Users to Roles direction.

Note that we do not need to make any change to the lib/MyApp/Schema.pm schema file. It simply tells DBIC to load all of the Result Class and ResultSet Class files it finds below the lib/MyApp/Schema directory, so it will automatically pick up our new table information.

🌸 Sanity-Check of the Development Server Reload 🌸

We aren't ready to try out the authentication just yet; we only want to do a quick check to be sure our model loads correctly. Assuming that you are following along and using the "-r" option on myapp_server.pl, then the development server should automatically reload (if not, press "Ctrl-C" (Ctrl+C) to break out of the server if it's running and then enter script/myapp_server.pl to start it). Look for the three new model objects in the startup debug output:

...
.-------------------------------------------------------------------+----------.
| Class                                                             | Type     |
+-------------------------------------------------------------------+----------+
| MyApp::Controller::Books                                          | instance |
| MyApp::Controller::Root                                           | instance |
| MyApp::Model::DB                                                  | instance |
| MyApp::Model::DB::Author                                          | class    |
| MyApp::Model::DB::Book                                            | class    |
| MyApp::Model::DB::BookAuthor                                      | class    |
| MyApp::Model::DB::Role                                            | class    |
| MyApp::Model::DB::User                                            | class    |
| MyApp::Model::DB::UserRole                                        | class    |
| MyApp::View::HTML                                                 | instance |
'-------------------------------------------------------------------+----------'
...

Again, notice that your "Result Class" classes have been "re-loaded" by Catalyst under MyApp::Model.

💅 Include Authentication and Session Plugins 💅

Edit lib/MyApp.pm and update it as follows (everything below "StackTrace" is new):

# Load plugins
use Catalyst qw/
    -Debug
    ConfigLoader
    Static::Simple

    StackTrace

    Authentication

    Session
    Session::Store::File
    Session::State::Cookie
/;

Note: As discussed in Chapter 3, different versions of "Catalyst::Devel" have used a variety of methods to load the plugins, but we are going to use the current Catalyst 5.9 practice of putting them on the "use Catalyst" line.

The "Authentication" plugin supports Authentication while the "Session" plugins are required to maintain state across multiple HTTP requests.

Note that the only required Authentication class is the main one. This is a change that occurred in version 0.09999_01 of the Authentication plugin. You do not need to specify a particular Authentication::Store or "Authentication::Credential" you want to use. Instead, indicate the Store and Credential you want to use in your application configuration (see below).

Make sure you include the additional plugins as new dependencies in the Makefile.PL file something like this:

requires 'Catalyst::Plugin::Authentication';
requires 'Catalyst::Plugin::Session';
requires 'Catalyst::Plugin::Session::Store::File';
requires 'Catalyst::Plugin::Session::State::Cookie';

Note that there are several options for Session::Store. Session::Store::Memcached is generally a good choice if you are on Unix. If you are running on Windows Session::Store::File is fine. Consult Session::Store and its subclasses for additional information and options (for example to use a database-backed session store).

👑 Configure Authentication 👑

There are a variety of ways to provide configuration information to Catalyst::Plugin::Authentication. Here we will use Catalyst::Authentication::Realm::SimpleDB because it automatically sets a reasonable set of defaults for us. (Note: the "SimpleDB" here has nothing to do with the SimpleDB offered in Amazon's web services offerings -- here we are only talking about a "simple" way to use your DB as an authentication backend.) Open lib/MyApp.pm and place the following text above the call to "__PACKAGE__->setup();":

# Configure SimpleDB Authentication
__PACKAGE__->config(
    'Plugin::Authentication' => {
        default => {
            class           => 'SimpleDB',
            user_model      => 'DB::User',
            password_type   => 'clear',
        },
    },
);

So like, we could have placed this configuration in myapp.conf, but putting it in lib/MyApp.pm is probably the better move 💅 — it's not likely something users of your app are gonna want to change during deployment. (Or you can do a lil mixture: leave class and user_model defined in lib/MyApp.pm like we showed above, but put password_type in myapp.conf so the password type is easy to tweak during deployment.) For this tutorial we're sticking with all the authentication-related config in lib/MyApp.pm, but if you wanna use myapp.conf, just convert it to this code:

<Plugin::Authentication>
    <default>
        password_type clear
        user_model    DB::User
        class         SimpleDB
    </default>
</Plugin::Authentication>

TIP: here's a short script that'll dump the contents of MyApp->config to Config::General format in myapp.conf:

$ CATALYST_DEBUG=0 perl -Ilib -e 'use MyApp; use Config::General;
    Config::General->new->save_file("myapp.conf", MyApp->config);'

HOWEVER: if you try out the command above, be sure to delete the myapp.conf command. Otherwise, you will wind up with duplicate configurations.

NOTE: because we're using SimpleDB along with a database layout that complies with its default assumptions: we don't need to specify the names of the columns where our username and password information is stored (hence, the "Simple" part of "SimpleDB"). That being said, SimpleDB lets you specify that type of information if you need to. Take a look at Catalyst::Authentication::Realm::SimpleDB for details.

---

🎀 Add Login and Logout Controllers 🎀

Use the Catalyst create script to create two stub controller files:

$ script/myapp_create.pl controller Login
$ script/myapp_create.pl controller Logout

You could easily use a single controller here. For example, you could have a User controller with both login and logout actions. Remember, Catalyst is designed to be very flexible, and leaves such matters up to you, the designer and programmer.

Then open lib/MyApp/Controller/Login.pm, and update the definition of sub index to match:

=head2 index

Login logic

=cut

sub index :Path :Args(0) {
    my ($self, $c) = @_;

    # Get the username and password from form
    my $username = $c->request->params->{username};
    my $password = $c->request->params->{password};

    # If the username and password values were found in form
    if ($username && $password) {
        # Attempt to log the user in
        if ($c->authenticate({ username => $username,
                               password => $password  } )) {
            # If successful, then let them use the application
            $c->response->redirect($c->uri_for(
                $c->controller('Books')->action_for('list')));
            return;
        } else {
            # Set an error message
            $c->stash(error_msg => "Bad username or password.");
        }
    } else {
        # Set an error message
        $c->stash(error_msg => "Empty username or password.")
            unless ($c->user_exists);
    }

    # If either of above don't work out, send to the login page
    $c->stash(template => 'login.tt2');
}

This controller fetches the username and password values from the login form and attempts to authenticate the user. If successful, it redirects the user to the book list page. If the login fails, the user stays on the login page and gets an error message. If the username and password values aren't present in the form, the user gets taken to the empty login form.

Note that we could've used something like sub default :Path, however, it's generally recommended (partly for historical reasons, and partly for code clarity) only to use default in MyApp::Controller::Root, and then mainly to generate the 404 not found page for the application.

Instead, we're using sub somename :Path :Args(0) {...} here to specifically match the URL /login. Path actions (aka, "literal actions") create URI matches relative to the namespace of the controller where they are defined. Although Path supports arguments that allow relative and absolute paths to be defined, here we use an empty Path definition to match on just the name of the controller itself. The method name, index, is arbitrary. We make the match even more specific with the :Args(0) action modifier -- this forces the match on only /login, not /login/somethingelse.

Next, update the corresponding method in lib/MyApp/Controller/Logout.pm to match:

=head2 index

Logout logic

=cut

sub index :Path :Args(0) {
    my ($self, $c) = @_;

    # Clear the user's state
    $c->logout;

    # Send the user to the starting point
    $c->response->redirect($c->uri_for('/'));
}

---

🌸 Add a Login Form TT Template Page 🌸

Create a login form by opening root/src/login.tt2 and inserting:

[% META title = 'Login' %]

<!-- Login form -->
<form method="post" action="[% c.uri_for('/login') %]">
    <table>
        <tr>
            <td>Username:</td>
            <td><input type="text" name="username" size="40" /></td>
        </tr>
        <tr>
            <td>Password:</td>
            <td><input type="password" name="password" size="40" /></td>
        </tr>
        <tr>
            <td colspan="2"><input type="submit" name="submit" value="Submit" /></td>
        </tr>
    </table>
</form>

---

✨ Add Valid User Check ✨

We need something that provides enforcement for the authentication mechanism -- a global mechanism that prevents users who have not passed authentication from reaching any pages except the login page. This is generally done via an auto action/method in lib/MyApp/Controller/Root.pm.

Edit the existing lib/MyApp/Controller/Root.pm class file and insert the following method:

=head2 auto

Check if there is a user and, if not, forward to login page

=cut

# Note that 'auto' runs after 'begin' but before your actions and that
# 'auto's "chain" (all from application path to most specific class are run)
# See the 'Actions' section of 'Catalyst::Manual::Intro' for more info.
sub auto :Private {
    my ($self, $c) = @_;

    # Allow unauthenticated users to reach the login page.  This
    # allows unauthenticated users to reach any action in the Login
    # controller.  To lock it down to a single action, we could use:
    #   if ($c->action eq $c->controller('Login')->action_for('index'))
    # to only allow unauthenticated access to the 'index' action we
    # added above.
    if ($c->controller eq $c->controller('Login')) {
        return 1;
    }

    # If a user doesn't exist, force login
    if (!$c->user_exists) {
        # Dump a log message to the development server debug output
        $c->log->debug('***Root::auto User not found, forwarding to /login');
        # Redirect the user to the login page
        $c->response->redirect($c->uri_for('/login'));
        # Return 0 to cancel 'post-auto' processing and prevent use of application
        return 0;
    }

    # User found, so return 1 to continue with processing after this 'auto'
    return 1;
}

As discussed in "CREATE A CATALYST CONTROLLER" in Catalyst::Manual::Tutorial::03_MoreCatalystBasics, every auto method from the application/root controller down to the most specific controller will be called. By placing the authentication enforcement code inside the auto method of lib/MyApp/Controller/Root.pm (or lib/MyApp.pm), it will be called for every request that is received by the entire application.

---

🦋 Displaying Content Only to Authenticated Users 🦋

Let's say you want to provide some information on the login page that changes depending on whether the user has authenticated yet. To do this, open root/src/login.tt2 in your editor and add the following lines to the bottom of the file:

...
<p>
[%
    # This code illustrates how certain parts of the TT
    # template will only be shown to users who have logged in
%]
[% IF c.user_exists %]
    Please Note: You are already logged in as '[% c.user.username %]'.
    You can <a href="[% c.uri_for('/logout') %]">logout</a> here.
[% ELSE %]
    You need to log in to use this application.
[% END %]
[%#
    Note that this whole block is a comment because the "#" appears
    immediate after the "[%" (with no spaces in between).  Although it
    can be a handy way to temporarily "comment out" a whole block of
    TT code, it's probably a little too subtle for use in "normal"
    comments.
%]
</p>

Although most of the code is comments, the middle few lines provide a "you are already logged in" reminder if the user returns to the login page after they've already authenticated. For users who have not yet authenticated, a "You need to log in..." message is displayed (note the use of an IF-THEN-ELSE construct in TT).

---

💖 Try Out Authentication 💖

The development server should have reloaded each time we edited one of the Controllers in the previous section. Now try going to http://localhost:3000/books/list and you should be redirected to the login page, hitting Shift+Reload or Ctrl+Reload if necessary (the "You are already logged in" message should not appear -- if it does, click the "logout" button and try again). Note the ***Root::auto User not found... debug message in the development server output. Enter username "test01" and password "mypass", and you should be taken to the Book List page.

IMPORTANT NOTE: if you're having issues with authentication on Internet Explorer (or potentially other browsers), be sure to check the system clocks on both your server and client machines. Internet Explorer is very picky about timestamps for cookies. You can use the ntpq -p command on the Tutorial Virtual Machine to check time sync and/or use the following command to force a sync:

sudo ntpdate-debian

Or, depending on your firewall configuration, try it with -u:

sudo ntpdate-debian -u

Note: NTP can be a little more finicky about firewalls because it uses UDP vs. the more common TCP that you see with most Internet protocols. Worst case, you might have to manually set the time on your development box instead of using NTP. 💅

Okay so open root/src/books/list.tt2 and drop these lines at the bottom (below the closing </table> tag):

...
<p>
    <a href="[% c.uri_for('/login') %]">Login</a>
    <a href="[% c.uri_for(c.controller.action_for('form_create')) %]">Create</a>
</p>

Reload your browser and boom — you should now see a "Login" and "Create" links at the bottom of the page (and yeah, like we said earlier, you can update template files without a development server reload, iconic ✨). Click that first link to bounce back to the login page. This time you should see the "You are already logged in" message. 👑

Finally, click the "You can logout here" link on the /login page. You should stay at the login page, but the message should change to "You need to log in to use this application." 🦋

---

🔐 USING PASSWORD HASHES 🔐

In this section we increase the security of our system by converting from cleartext passwords to SHA-1 password hashes that include a random "salt" value to make them extremely difficult to crack, even with dictionary and "rainbow table" attacks. no cap, this is a glow-up 🔥

Note: This section is optional. You can skip it and the rest of the tutorial will function normally.

Be aware that even with the techniques shown in this section, the browser still transmits the passwords in cleartext to your application. We are just avoiding the storage of cleartext passwords in the database by using a salted SHA-1 hash. If you are concerned about cleartext passwords between the browser and your application, consider using SSL/TLS, made easy with modules such as Catalyst::Plugin::RequireSSL and Catalyst::ActionRole::RequireSSL. 🫶

🧚 Re-Run the DBIC::Schema Model Helper to Include DBIx::Class::PassphraseColumn 🧚

Let's re-run the model helper to have it include DBIx::Class::PassphraseColumn in all of the Result Classes it generates for us. Simply use the same command we saw in Chapters 3 and 4, but add ,PassphraseColumn to the components argument:

$ script/myapp_create.pl model DB DBIC::Schema MyApp::Schema \
    create=static components=TimeStamp,PassphraseColumn dbi:SQLite:myapp.db \
    on_connect_do="PRAGMA foreign_keys = ON"

If you then open one of the Result Classes, you will see that it includes PassphraseColumn in the load_components line. Take a look at lib/MyApp/Schema/Result/User.pm since that's the main class where we want to use hashed and salted passwords:

__PACKAGE__->load_components("InflateColumn::DateTime", "TimeStamp", "PassphraseColumn");

🌸 Modify the "password" Column to Use PassphraseColumn 🌸

Open the file lib/MyApp/Schema/Result/User.pm and enter the following text below the # DO NOT MODIFY THIS OR ANYTHING ABOVE! line but above the closing 1;:

# Have the 'password' column use a SHA-1 hash and 20-byte salt
# with RFC 2307 encoding; Generate the 'check_password" method
__PACKAGE__->add_columns(
    'password' => {
        passphrase       => 'rfc2307',
        passphrase_class => 'SaltedDigest',
        passphrase_args  => {
            algorithm   => 'SHA-1',
            salt_random => 20,
        },
        passphrase_check_method => 'check_password',
    },
);

This redefines the automatically generated definition for the password fields at the top of the Result Class file to now use PassphraseColumn logic, storing passwords in RFC 2307 format (passphrase is set to rfc2307). passphrase_class can be set to the name of any Authen::Passphrase::* class, such as SaltedDigest to use Authen::Passphrase::SaltedDigest, or BlowfishCrypt to use Authen::Passphrase::BlowfishCrypt. passphrase_args is then used to customize the passphrase class you selected. Here we specified the digest algorithm to use as SHA-1 and the size of the salt to use, but we could have also specified any other option the selected passphrase class supports. iykyk 💜

🎀 Load Hashed Passwords in the Database 🎀

Next, let's create a quick script to load some hashed and salted passwords into the password column of our users table. Open the file set_hashed_passwords.pl in your editor and enter the following text:

#!/usr/bin/perl

use strict;
use warnings;

use MyApp::Schema;

my $schema = MyApp::Schema->connect('dbi:SQLite:myapp.db');

my @users = $schema->resultset('User')->all;

foreach my $user (@users) {
    $user->password('mypass');
    $user->update;
}

PassphraseColumn lets us simply call $user->check_password($password) to see if the user has supplied the correct password, or, as we show above, call $user->update($new_password) to update the hashed password stored for this user. literally so convenient 🍓

Then run the following command:

$ DBIC_TRACE=1 perl -Ilib set_hashed_passwords.pl

We had to use the -Ilib argument to tell Perl to look under the lib directory for our MyApp::Schema model.

The DBIC_TRACE output should show that the update worked:

$ DBIC_TRACE=1 perl -Ilib set_hashed_passwords.pl
SELECT me.id, me.username, me.password, me.email_address,
me.first_name, me.last_name, me.active FROM users me:
UPDATE users SET password = ? WHERE ( id = ? ):
'{SSHA}esgz64CpHMo8pMfgIIszP13ft23z/zio04aCwNdm0wc6MDeloMUH4g==', '1'
UPDATE users SET password = ? WHERE ( id = ? ):
'{SSHA}FpGhpCJus+Ea9ne4ww8404HH+hJKW/fW+bAv1v6FuRUy2G7I2aoTRQ==', '2'
UPDATE users SET password = ? WHERE ( id = ? ):
'{SSHA}ZyGlpiHls8qFBSbHr3r5t/iqcZE602XLMbkSVRRNl6rF8imv1abQVg==', '3'

But we can further confirm our actions by dumping the users table:

$ sqlite3 myapp.db "select * from users"
1|test01|{SSHA}esgz64CpHMo8pMfgIIszP13ft23z/zio04aCwNdm0wc6MDeloMUH4g==|t01@na.com|Joe|Blow|1
2|test02|{SSHA}FpGhpCJus+Ea9ne4ww8404HH+hJKW/fW+bAv1v6FuRUy2G7I2aoTRQ==|t02@na.com|Jane|Doe|1
3|test03|{SSHA}ZyGlpiHls8qFBSbHr3r5t/iqcZE602XLMbkSVRRNl6rF8imv1abQVg==|t03@na.com|No|Go|0

As you can see, the passwords are much harder to steal from the database (not only are the hashes stored, but every hash is different even though the passwords are the same because of the added "salt" value). Also note that this demonstrates how to use a DBIx::Class model outside of your web application -- a very useful feature in many situations. main character energy fr fr 👑

🦋 Enable Hashed and Salted Passwords 🦋

Edit lib/MyApp.pm and update the config() section for Plugin::Authentication it to match the following text (the only change is to the password_type field):

# Configure SimpleDB Authentication
__PACKAGE__->config(
    'Plugin::Authentication' => {
        default => {
            class           => 'SimpleDB',
            user_model      => 'DB::User',
            password_type   => 'self_check',
        },
    },
);

The use of self_check will cause Catalyst::Plugin::Authentication::Store::DBIx::Class to call the check_password method we enabled on our password columns. slay 💅

⭐ Try Out the Hashed Passwords ⭐

The development server should restart as soon as your save the lib/MyApp.pm file in the previous section. You should now be able to go to <http://localhost:3000/books/list> and login as before. When done, click the "logout" link on the login page (or point your browser at <http://localhost:3000/logout>). 🌈

🌸 USING THE SESSION FOR FLASH 🌸

Okay so bestie, quick recap from the previous chapter of the tutorial: flash lets you set variables in a way that is very similar to stash, but it will remain set across multiple requests. Once the value is read, it is cleared (unless reset). Even though flash has nothing to do with authentication, it does leverage the same session plugins. Now that those plugins are enabled, let's go back and update the "delete and redirect with query parameters" code seen at the end of the Basic CRUD chapter of the tutorial to take advantage of flash. Slay, let's go. 💅

First, open lib/MyApp/Controller/Books.pm and modify sub delete to match the following (everything after the model search line of code has changed):

=head2 delete

Delete a book

=cut

sub delete :Chained('object') :PathPart('delete') :Args(0) {
    my ($self, $c) = @_;

    # Use the book object saved by 'object' and delete it along
    # with related 'book_authors' entries
    $c->stash->{object}->delete;

    # Use 'flash' to save information across requests until it's read
    $c->flash->{status_msg} = "Book deleted";

    # Redirect the user back to the list page
    $c->response->redirect($c->uri_for($self->action_for('list')));
}

Next, open root/src/wrapper.tt2 and update the TT code to pull from flash vs. the status_msg query parameter:

...
<div id="content">
    [%# Status and error messages %]
    <span class="message">[% status_msg || c.flash.status_msg %]</span>
    <span class="error">[% error_msg %]</span>
    [%# This is where TT will stick all of your template's contents. -%]
    [% content %]
</div><!-- end content -->
...

Although the sample above only shows the content div, leave the rest of the file intact -- the only change we made is swapping the || c.request.params.status_msg bit for || c.flash.status_msg in the <span class="message"> line. Don't touch the rest, bestie. 🫶

✨ Try Out Flash ✨

Authenticate using the login screen and then point your browser to <http://localhost:3000/books/url_create/Test/1/4> to create an extra several books. Click the "Return to list" link and delete one of the "Test" books you just added. The flash mechanism should retain our "Book deleted" status message across the redirect. Iconic behavior, honestly. ⭐

NOTE: While flash will save information across multiple requests, it does get cleared the first time it is read. In general, this is exactly what you want -- the flash message will get displayed on the next screen where it's appropriate, but it won't "keep showing up" after that first time (unless you reset it). Please refer to Catalyst::Plugin::Session for additional information.

Note: There is also a flash-to-stash feature that will automatically load the contents of flash into stash, allowing us to use the more typical c.flash.status_msg in our TT template in lieu of the more verbose status_msg || c.flash.status_msg we used above. Consult Catalyst::Plugin::Session for additional information.

🦋 Switch To Catalyst::Plugin::StatusMessages 🦋

Although the query parameter technique we used in Chapter 4 and the flash approach we used above will work in most cases, they both have their drawbacks. The query parameters can leave the status message on the screen longer than it should (for example, if the user hits refresh). And flash can display the wrong message on the wrong screen (flash just shows the message on the next page for that user... if the user has multiple windows or tabs open, then the wrong one can get the status message). Not me defending either of those, because nope. 😭

Catalyst::Plugin::StatusMessage is designed to address these shortcomings. It stores the messages in the user's session (so they are available across multiple requests), but ties each status message to a random token. By passing this token across the redirect, we are no longer relying on a potentially ambiguous "next request" like we do with flash. And, because the message is deleted the first time it's displayed, the user can hit refresh and still only see the message a single time (even though the URL may continue to reference the token, it's only displayed the first time). The use of StatusMessage or a similar mechanism is recommended for all Catalyst applications. Periodt. 💯

To enable StatusMessage, first edit lib/MyApp.pm and add StatusMessage to the list of plugins:

use Catalyst qw/
    -Debug
    ConfigLoader
    Static::Simple

    StackTrace

    Authentication

    Session
    Session::Store::File
    Session::State::Cookie

    StatusMessage
/;

Then edit lib/MyApp/Controller/Books.pm and modify the delete action to match the following:

sub delete :Chained('object') :PathPart('delete') :Args(0) {
    my ($self, $c) = @_;

    # Saved the PK id for status_msg below
    my $id = $c->stash->{object}->id;

    # Use the book object saved by 'object' and delete it along
    # with related 'book_authors' entries
    $c->stash->{object}->delete;

    # Redirect the user back to the list page
    $c->response->redirect($c->uri_for($self->action_for('list'),
        {mid => $c->set_status_msg("Deleted book $id")}));
}

This uses the set_status_msg that the plugin added to $c to save the message under a random token. (If we wanted to save an error message, we could have used set_error_msg.) Because set_status_msg and set_error_msg both return the random token, we can assign that value to the mid query parameter via uri_for as shown above. Cute, clever, lowkey obsessed. 🎀

Next, we need to make sure that the list page will load display the message. The easiest way to do this is to take advantage of the chained dispatch we implemented in Chapter 4. Edit lib/MyApp/Controller/Books.pm again and update the base action to match:

sub base :Chained('/') :PathPart('books') :CaptureArgs(0) {
    my ($self, $c) = @_;

    # Store the ResultSet in stash so it's available for other methods
    $c->stash(resultset => $c->model('DB::Book'));

    # Print a message to the debug log
    $c->log->debug('*** INSIDE BASE METHOD ***');

    # Load status messages
    $c->load_status_msgs;
}

That way, anything that chains off base will automatically get any status or error messages loaded into the stash. Let's convert the list action to take advantage of this. Modify the method signature for list from:

sub list :Local {

to:

sub list :Chained('base') :PathPart('list') :Args(0) {

Finally, let's clean up the status/error message code in our wrapper template. Edit root/src/wrapper.tt2 and change the content div to match the following:

<div id="content">
    [%# Status and error messages %]
    <span class="message">[% status_msg %]</span>
    <span class="error">[% error_msg %]</span>
    [%# This is where TT will stick all of your template's contents. -%]
    [% content %]
</div><!-- end content -->

Now go to <http://localhost:3000/books/list> in your browser. Delete another of the "Test" books you added in the previous step. You should get redirection from the delete action back to the list action, but with a mid=######## message ID query parameter. The screen should say "Deleted book #" (where # is the PK id of the book you removed). However, if you hit refresh in your browser, the status message is no longer displayed (even though the URL does still contain the message ID token, it is ignored -- thereby keeping the state of our status/error messages in sync with the users actions). That's the vibe check passing, bestie. 🔥

You can jump to the next chapter of the tutorial here: Authorization

🎀 AUTHOR 🎀

Kennedy Clark, hkclark@gmail.com

Feel free to contact the author for any errors or suggestions, but the best way to report issues is via the CPAN RT Bug system at <https://rt.cpan.org/Public/Dist/Display.html?Name=Catalyst-Manual>.

Copyright 2006-2011, Kennedy Clark, under the Creative Commons Attribution Share-Alike License Version 3.0 (<https://creativecommons.org/licenses/by-sa/3.0/us/>).

---

And that's the whole tutorial part, bestie — signing off from perl v5.42.0, dated 2024-03-23, on the Catalys...tication(3) page. Slay, you made it. 💖✨