SRC/clatbs.f(3)

🌸 NAME 🌸

SRC/clatbs.f — okay bestie, this is the page for it. The header tea is that SRC/clatbs.f(3) lives in the Library Functions Manual, and it’s about a Fortran subroutine that solves triangular banded systems. No cap, it’s giving major linear algebra energy. 💅

✨ SYNOPSIS ✨

🧚 Functions/Subroutines 🧚

   subroutine clatbs (uplo, trans, diag, normin, n, kd, ab, ldab, x, scale,
           cnorm, info)
           CLATBS solves a triangular banded system of equations.

So yeah: CLATBS solves a triangular banded system of equations. That’s the whole main-character summary. 🫶

🎀 Function/Subroutine Documentation 🎀

   subroutine clatbs (character uplo, character trans, character diag,
       character normin, integer n, integer kd, complex, dimension( ldab, * )
       ab, integer ldab, complex, dimension( * ) x, real scale, real,
       dimension( * ) cnorm, integer info)
       CLATBS solves a triangular banded system of equations.

Again for the people in the back: CLATBS solves a triangular banded system of equations. Iconic behavior. ✨

💖 Purpose 💖

Okay so here’s the lore: CLATBS solves one of these triangular systems:

A * x = s*b,  A**T * x = s*b,  or  A**H * x = s*b,

with scaling to prevent overflow, where A is an upper or lower triangular band matrix. Here A**T denotes the transpose of A, x and b are n-element vectors, and s is a scaling factor, usually less than or equal to 1, chosen so that the components of x will be less than the overflow threshold. If the unscaled problem will not cause overflow, the Level 2 BLAS routine CTBSV is called. If the matrix A is singular (A(j,j) = 0 for some j), then s is set to 0 and a non-trivial solution to A*x = 0 is returned.

🦋 Parameters 🦋

• UPLO — UPLO is CHARACTER*1. Specifies whether the matrix A is upper or lower triangular.
  • = 'U': Upper triangular
  • = 'L': Lower triangular
• TRANS — TRANS is CHARACTER*1. Specifies the operation applied to A.
  • = 'N': Solve A * x = s*b (No transpose)
  • = 'T': Solve A**T * x = s*b (Transpose)
  • = 'C': Solve A**H * x = s*b (Conjugate transpose)
• DIAG — DIAG is CHARACTER*1. Specifies whether or not the matrix A is unit triangular.
  • = 'N': Non-unit triangular
  • = 'U': Unit triangular
• NORMIN — NORMIN is CHARACTER*1. Specifies whether CNORM has been set or not.
  • = 'Y': CNORM contains the column norms on entry
  • = 'N': CNORM is not set on entry. On exit, the norms will be computed and stored in CNORM.
• N — N is INTEGER. The order of the matrix A. N >= 0.
• KD — KD is INTEGER. The number of subdiagonals or superdiagonals in the triangular matrix A. KD >= 0.
• AB — AB is COMPLEX array, dimension (LDAB,N). The upper or lower triangular band matrix A, stored in the first KD+1 rows of the array. The j-th column of A is stored in the j-th column of the array AB as follows:

if UPLO = 'U', AB(kd+1+i-j,j) = A(i,j) for max(1,j-kd)<=i<=j;
if UPLO = 'L', AB(1+i-j,j)    = A(i,j) for j<=i<=min(n,j+kd).

• LDAB — LDAB is INTEGER. The leading dimension of the array AB. LDAB >= KD+1.
• X — X is COMPLEX array, dimension (N). On entry, the right hand side b of the triangular system. On exit, X is overwritten by the solution vector x.
• SCALE — SCALE is REAL. The scaling factor s for the triangular system:

A * x = s*b,  A**T * x = s*b,  or  A**H * x = s*b.

If SCALE = 0, the matrix A is singular or badly scaled, and the vector x is an exact or approximate solution to A*x = 0.

• CNORM — CNORM is REAL array, dimension (N). If NORMIN = 'Y', CNORM is an input argument and CNORM(j) contains the norm of the off-diagonal part of the j-th column of A. If TRANS = 'N', CNORM(j) must be greater than or equal to the infinity-norm, and if TRANS = 'T' or 'C', CNORM(j) must be greater than or equal to the 1-norm. If NORMIN = 'N', CNORM is an output argument and CNORM(j) returns the 1-norm of the offdiagonal part of the j-th column of A.
• INFO — INFO is INTEGER
  • = 0: successful exit
  • < 0: if INFO = -k, the k-th argument had an illegal value

👑 Author 👑

• Univ. of Tennessee
• Univ. of California Berkeley
• Univ. of Colorado Denver
• NAG Ltd.

🔥 Further Details 🔥

A rough bound on x is computed; if that is less than overflow, CTBSV is called, otherwise, specific code is used which checks for possible overflow or divide-by-zero at every operation.

A columnwise scheme is used for solving A*x = b. The basic algorithm if A is lower triangular is

x[1:n] := b[1:n]
for j = 1, ..., n
     x(j) := x(j) / A(j,j)
     x[j+1:n] := x[j+1:n] - x(j) * A[j+1:n,j]
end

Define bounds on the components of x after j iterations of the loop:

M(j) = bound on x[1:j]
G(j) = bound on x[j+1:n]

Initially, let M(0) = 0 and G(0) = max{x(i), i=1,...,n}.

Then for iteration j+1 we have

M(j+1) <= G(j) / | A(j+1,j+1) |
G(j+1) <= G(j) + M(j+1) * | A[j+2:n,j+1] |
         <= G(j) ( 1 + CNORM(j+1) / | A(j+1,j+1) | )

where CNORM(j+1) is greater than or equal to the infinity-norm of column j+1 of A, not counting the diagonal. Hence

G(j) <= G(0) product ( 1 + CNORM(i) / | A(i,i) | )
             1<=i<=j

and

|x(j)| <= ( G(0) / |A(j,j)| ) product ( 1 + CNORM(i) / |A(i,i)| )
                              1<=i< j

Since |x(j)| <= M(j), we use the Level 2 BLAS routine CTBSV if the reciprocal of the largest M(j), j=1,..,n, is larger than max(underflow, 1/overflow).

The bound on x(j) is also used to determine when a step in the columnwise method can be performed without fear of overflow. If the computed bound is greater than a large constant, x is scaled to prevent overflow, but if the bound overflows, x is set to 0, x(j) to 1, and scale to 0, and a non-trivial solution to A*x = 0 is found.

Similarly, a row-wise scheme is used to solve A**T *x = b or A**H *x = b. The basic algorithm for A upper triangular is

for j = 1, ..., n
     x(j) := ( b(j) - A[1:j-1,j]' * x[1:j-1] ) / A(j,j)
end

We simultaneously compute two bounds

G(j) = bound on ( b(i) - A[1:i-1,i]' * x[1:i-1] ), 1<=i<=j
M(j) = bound on x(i), 1<=i<=j

The initial values are G(0) = 0, M(0) = max{b(i), i=1,..,n}, and we add the constraint G(j) >= G(j-1) and M(j) >= M(j-1) for j >= 1. Then the bound on x(j) is

M(j) <= M(j-1) * ( 1 + CNORM(j) ) / | A(j,j) |

     <= M(0) * product ( ( 1 + CNORM(i) ) / |A(i,i)| )
               1<=i<=j

and we can safely call CTBSV if 1/M(n) and 1/G(n) are both greater than max(underflow, 1/overflow).

Definition at line 241 of file clatbs.f.

📜 Author 📜

Generated automatically by Doxygen for LAPACK from the source code.

---

And that’s the final footer tea, bestie: this page signs off with LAPACK, Version 3.12.0, and SRC/clatbs.f(3). Bye 💖✨💅