XSECURELOCK(1)

🦋 XSECURELOCK(1) — XSecureLock, the X11 screen lock utility 💖

okay so bestie, welcome to the manual page for XSecureLock, the X11 screen lock utility, and ngl this thing takes security so seriously it's giving bodyguard energy 👑. everything below is the real deal, no cap — all the options, all the defaults, all the little warnings. let's go 🌈

---

🌸 NAME

XSecureLock — X11 screen lock utility ✨

---

💅 SYNPOSIS

[options] xsecurelock [– command-to-run-when-locked]

---

🎀 DESCRIPTION

XSecureLock is an X11 screen lock utility designed with the primary goal of security. like, that's the vibe. it's not here to be cute, it's here to be secure 🛡️

it locks the current X11 session, and only allows unlocking if the user authenticates to it (typically with the login password). no password, no entry, periodt 🔒

while locked, it can launch a screen saver process and then waits for input events. upon an input event, it displays a login dialog to allow for unlocking. so like, the second you touch anything, boom, login prompt, main character energy ✨

---

✨ OPTIONS ✨

okay so here's the thing bestie — options are set as environment variables prior to invoking XSecureLock. not flags, not args, environment variables. the following variables are available:

• XSECURELOCK_AUTH — specifies the desired authentication module (the part that displays the authentication prompt) 🎭
• XSECURELOCK_AUTHPROTO — specifies the desired authentication protocol module (the part that talks to the system) 📡
• XSECURELOCK_AUTH_BACKGROUND_COLOR — specifies the X11 color (see manpage of XParseColor) for the background of the auth dialog 🎨
• XSECURELOCK_AUTH_CURSOR_BLINK — if set, the cursor will blink in the auth dialog. enabled by default, and you can set it to 0 to disable it. so like, off means off 🫥
• XSECURELOCK_AUTH_SOUNDS — specifies whether to play sounds during authentication to indicate status. sounds are defined as follows:
  • High-pitch ascending: prompt for user input 🎵
  • High-pitch constant: an info message was displayed ℹ️
  • Low-pitch descending: an error message was displayed 😭
  • Medium-pitch ascending: authentication successful 🎉
• XSECURELOCK_AUTH_FOREGROUND_COLOR — specifies the X11 color (see manpage of XParseColor) for the foreground text of the auth dialog ✍️
• XSECURELOCK_AUTH_TIMEOUT — specifies the time (in seconds) to wait for response to a prompt by auth_x11 before giving up and reverting to the screen saver ⏳
• XSECURELOCK_AUTH_WARNING_COLOR — specifies the X11 color (see manpage of XParseColor) for the warning text of the auth dialog ⚠️
• XSECURELOCK_BACKGROUND_COLOR — specifies the X11 color (see manpage of XParseColor) for the background of the main and saver windows 🌌
• XSECURELOCK_BLANK_TIMEOUT — specifies the time (in seconds) before telling X11 to fully blank the screen; a negative value disables X11 blanking. the time is measured since the closing of the auth window or xsecurelock startup. setting this to 0 is rather nonsensical, as key-release events (e.g. from the keystroke to launch xsecurelock or from pressing escape to close the auth dialog) always wake up the screen. like, 0 does nothing for you bestie 💀
• XSECURELOCK_BLANK_DPMS_STATE — specifies which DPMS state to put the screen in when blanking (one of standby, suspend, off and on, where "on" means to not invoke DPMS at all) 💤
• XSECURELOCK_BURNIN_MITIGATION — specifies the number of pixels the prompt of auth_x11 may be moved at startup to mitigate possible burn-in effects due to the auth dialog being displayed all the time (e.g. when spurious mouse events wake up the screen all the time) 🖥️
• XSECURELOCK_BURNIN_MITIGATION_DYNAMIC — if set to a non-zero value, auth_x11 will move the prompt while it is being displayed, but stay within the bounds of XSECURELOCK_BURNIN_MITIGATION. the value of this variable is the maximum allowed shift per screen refresh. this mitigates short-term burn-in effects but is probably annoying to most users, and thus disabled by default. so like, it works but your prompt is out here vibing around the screen 🙈
• XSECURELOCK_COMPOSITE_OBSCURER — create a second full-screen window to obscure window content in case a running compositor unmaps its own window. helps with some instances of bad compositor behavior (such as compositor crashes/restarts, but also compton has been caught at drawing notification icons above the screen locker when not using the GLX backend), should prevent compositors from unredirecting as it's 1 pixel smaller than the screen from every side, and should otherwise be harmless, so it's enabled by default 🫶
• XSECURELOCK_DATETIME_FORMAT — the date format to show. defaults to the locale settings. (see man date for possible formats) 📅
• XSECURELOCK_DEBUG_ALLOW_LOCKING_IF_INEFFECTIVE — normally we don't allow locking sessions that are likely not any useful to lock, such as the X11 part of a Wayland session (one could still use Wayland applications when locked) or VNC sessions (as it'd only lock the server side session while users will likely think they locked the client, allowing for an easy escape). these checks can be bypassed by setting this variable to 1. not recommended other than for debugging XSecureLock itself via such connections 🚨
• XSECURELOCK_DEBUG_WINDOW_INFO — when complaining about another window misbehaving, print not just the window ID but also some info about it. uses the xwininfo and xprop tools 🔍
• XSECURELOCK_DIM_ALPHA — linear-space opacity to fade the screen to 🌫️
• XSECURELOCK_DIM_COLOR — X11 color to fade the screen to 🎨
• XSECURELOCK_DIM_FPS — target framerate to attain during the dimming effect of dimmer. ideally matches the display refresh rate 🎞️
• XSECURELOCK_DIM_MAX_FILL_SIZE — maximum size (in width or height) to fill at once using an XFillRectangle call. low values may cause performance loss or noticeable tearing during dimming; high values may cause crashes or hangs with some graphics drivers or a temporarily unresponsive X server. so like, pick your poison wisely 😬
• XSECURELOCK_DIM_OVERRIDE_COMPOSITOR_DETECTION — when set to 1, always try to use transparency for dimming; when set to 0, always use a dither pattern. default is to autodetect whether transparency will likely work 🤔
• XSECURELOCK_DIM_TIME_MS — milliseconds to dim for when above xss-lock command line with dimmer is used; also used by wait_nonidle to know when to assume dimming and waiting has finished and exit ⏱️
• XSECURELOCK_DISCARD_FIRST_KEYPRESS — if set to 0, the key pressed to stop the screen saver and spawn the auth child is sent to the auth child (and thus becomes part of the password entry). by default we always discard the key press that started the authentication flow, to prevent users from getting used to type their password on a blank screen (which could be just powered off and have a chat client behind or similar). lowkey a big deal, don't turn this off 🫣
• XSECURELOCK_FONT — X11 or FontConfig font name to use for auth_x11. you can get a list of supported font names by running xlsfonts and fc-list 🔤
• XSECURELOCK_FORCE_GRAB — when grabbing fails, try stealing the grab from other windows (a value of 2 steals from all descendants of the root window, while a value of 1 only steals from client windows). this works only sometimes and is incompatible with many window managers, so use with care. see the "Forcing Grabs" section below for details. ⚠️ careful bestie
• XSECURELOCK_GLOBAL_SAVER — specifies the desired global screen saver module (by default this is a multiplexer that runs XSECURELOCK_SAVER on each screen) 🌠
• XSECURELOCK_IDLE_TIMERS — comma-separated list of idle time counters used by until_nonidle. typical values are either empty (relies on the X Screen Saver extension instead), IDLETIME and DEVICEIDLETIMEn where n is an XInput device index (run xinput to see them). if multiple time counters are specified, the idle time is the minimum of them all. all listed timers must have the same unit ⌛
• XSECURELOCK_IMAGE_DURATION_SECONDS — how long to show each still image played by saver_mpv. defaults to 1 🖼️
• XSECURELOCK_KEY_%s_COMMAND where %s is the name of an X11 keysym (find using xev) — a shell command to execute when the specified key is pressed. useful e.g. for media player control. beware: be cautious about what you run with this, as it may yield attackers control over your computer. 🚨 like fr fr, think before you paste a command in here
• XSECURELOCK_LIST_VIDEOS_COMMAND — shell command to list all video files to potentially play by saver_mpv or saver_mplayer. defaults to find ~/Videos -type f 📼
• XSECURELOCK_NO_COMPOSITE — disables covering the composite overlay window. this switches to a more traditional way of locking, but may allow desktop notifications to be visible on top of the screen lock. not recommended 🙅
• XSECURELOCK_NO_PAM_RHOST — do not set PAM_RHOST to localhost, despite recommendation (http://www.linux-pam.org/Linux-PAM-html/adg-security-user-identity.html) to do so by the Linux-PAM Application Developers' Guide. this may work around bugs in third-party PAM authentication modules. if this solves a problem for you, please report a bug against said PAM module 🐛
• XSECURELOCK_NO_XRANDR — disables multi monitor support using XRandR 🖥️🖥️
• XSECURELOCK_NO_XRANDR15 — disables multi monitor support using XRandR 1.5 and fall back to XRandR 1.2. not recommended 🙅
• XSECURELOCK_PAM_SERVICE — pam service name. you should have a file with that name in /etc/pam.d 📁
• XSECURELOCK_PASSWORD_PROMPT — choose password prompt mode:
  • asterisks: shows asterisks, like classic password prompts. this is the least secure option because password length is visible. 😬

***_
*******_

• cursor: shows a cursor that jumps around on each key press. this is the default. 👑

________|_______________________
___________________|____________

• disco: shows dancers, which dance around on each key press. requires a font that can handle Unicode line drawing characters, and FontConfig. 🕺💃

┏(･o･)┛ ♪ ┗(･o･)┓ ♪ ┏(･o･)┛ ♪ ┗(･o･)┓ ♪ ┏(･o･)┛
┗(･o･)┓ ♪ ┏(･o･)┛ ♪ ┏(･o･)┛ ♪ ┏(･o･)┛ ♪ ┏(･o･)┛

• emoji: shows an emoji, changing which one on each key press. requires a font that can handle emoji, and FontConfig. 🌈

👍
🎶
💕

• emoticon: shows an ascii emoticon, changing which one on each key press. 😜

:-O
d-X
X-\

• hidden: completely hides the password, and there's no feedback for keypresses. this would almost be most secure — however as it gives no feedback to input whatsoever, you may not be able to notice accidentally typing to another computer and sending your password to some chatroom. 💀 imagine
• kaomoji: shows a kaomoji (Japanese emoticon), changing which one on each key press. requires a Japanese font, and FontConfig. 🌸

(°ʖ°)
(＾ｕ＾)
¯\_(ツ)_/¯

---

okay that's the options done bestie, but we're not done yet — part 2 is coming and it's got more sections, so don't go anywhere 💖✨

• time — okay so every single keystroke it shows the current time since the epoch. This may be the most secure mode, because it gives feedback to keystroke based exclusively on public information, and it does not carry over any state between keystrokes whatsoever — not even some form of randomness. It's giving amnesia, but make it secure. 💅

1559655410.922329

• time_hex — same as time, but in microseconds and hexadecimal. The original says “Because we can” and honestly? iconic. ✨

0x58a7f92bd7359

• XSECURELOCK_SAVER — specifies the desired screen saver module. Pick your fighter. 🎀
• XSECURELOCK_SAVER_RESET_ON_AUTH_CLOSE — specifies whether to reset the saver module when the auth dialog closes. Resetting is done by sending SIGUSR1 to the saver, which may either just terminate, or handle this specifically to do a cheaper reset. Choose your adventure. 🦋
• XSECURELOCK_SHOW_DATETIME — whether to show local date and time on the login. Disabled by default, so if you want clock energy you gotta turn it on. ⏰
• XSECURELOCK_SHOW_HOSTNAME — whether to show the hostname on the login screen of auth_x11. Possible values are 0 for not showing the hostname, 1 for showing the short form, and 2 for showing the long form. It's giving name tag vibes. 🏷️
• XSECURELOCK_SHOW_KEYBOARD_LAYOUT — whether to show the name of the current keyboard layout. Enabled by default, so yes bestie, you'll see it unless you turn it off. ⌨️
• XSECURELOCK_SHOW_USERNAME — whether to show the username on the login screen of auth_x11. Simple as that. 👤
• XSECURELOCK_SINGLE_AUTH_WINDOW — whether to show only a single auth window from auth_x11, as opposed to one per screen. Sometimes less is more. 🪟
• XSECURELOCK_SWITCH_USER_COMMAND — shell command to execute when Win-O or Ctrl-Alt-O are pressed (think “other user”). Typical values could be lxdm -c USER_SWITCH, dm-tool switch-to-greeter, gdmflexiserver or kdmctl reserve, depending on your desktop environment. Pick the one that matches your DE, no cap. 🔄
• XSECURELOCK_VIDEOS_FLAGS — flags to append when invoking mpv/mplayer with saver_mpv or saver_mplayer. Defaults to empty. So if you want extra sauce, this is where you put it. 🎬
• XSECURELOCK_WAIT_TIME_MS — milliseconds to wait after dimming (and before locking) when that xss-lock command line from earlier is used. Should be at least as large as the period time set using xset s. Also used by wait_nonidle to know when to assume dimming and waiting has finished and exit. Timing is everything, bestie. ⏳
• XSECURELOCK_SAVER_DELAY_MS — milliseconds to wait after starting children process and before mapping windows to let children be ready to display and reduce the black flash. We love a smooth transition. ✨
• XSECURELOCK_SAVER_STOP_ON_BLANK — specifies if saver is stopped when screen is blanked (DPMS or XSS) to save power. Your call, but eco queen behavior. 🌱
• XSECURELOCK_XSCREENSAVER_PATH — location where XScreenSaver hacks are installed for use by saver_xscreensaver. Point it at the goods. 📁

Additionally, XSecureLock spawns the command-to-run-when-locked once locking is complete; this can be used as a notification mechanism if desired. Cute, right? 🔔

---

🐛 REPORTING BUGS 🐛

Found a bug? The official bug tracker is at https://github.com/google/xsecurelock/issues/. Go spill the tea there. 💅

---

📜 COPYRIGHT 📜

The code is released unser the Apache 2.0 license — yes, the page literally says “unser”, and we're keeping it because facts are facts. See the LICENSE file for more details. 💖

---

👀 SEE ALSO 👀

• xss-lock (1), xautolock (1).

The README.md file included with XSecureLock contains full documentation. Go read, bestie. 📚

The XSecureLock source code and all documentation may be downloaded on https://github.com/google/xsecurelock/.

---

👑 AUTHORS 👑

Rudolf Polzer. Thank you for your service. 🫶

---

That's the whole manual, bestie — XSecureLock User Manual, dated April 15, 2019, for XSECURELOCK(1). Stay secure, stay slay. 💅✨