UAPUTL(1)

💖 UAPUTL(1) — the Marvell uAP wireless driver config bestie 💖

okay so hi!! this is uaputl, the manual page for the little tool that configures the device driver for Marvell's uAP wireless interface. she's giving "General Commands Manual" energy and honestly? she ate. ✨

🌸 SYNOPSIS 🌸

uaputl [options] <command> [parameters]

like, options first, then the command, then whatever parameters that command wants. simple as. 🎀

🦋 DESCRIPTION 🦋

This page documents briefly the uaputl command — the one you reach for when you need to configure the device driver for Marvell's uAP wireless interface. no cap, that's the whole vibe. 💅

👑 OPTIONS 👑

• -d <debug_level> — turns on debugging output!! debug_level can be 0, 1, or 2, and those are your only choices bestie, don't get creative. 🔥
• -h, --help — shows you a lil summary of the options and commands. your safety net fr fr. 🫶
• -i <interface> — picks which interface you're configuring. interface is the one you want. 💜
• -v — shows the version of the program. slay, she's self-aware. ⭐

🌈 COMMANDS 🌈

for more info on how to use any one of these commands, just do:

uaputl.exe <command> --help

note the .exe — that's exactly how the original spells it, so I'm keeping it exactly like that, no edits, periodt. 💀

and now, the whole roster, in order, no skips, no shortcuts:

• sys_config — set/get uAP's profile 📝
• sys_info — display system info 🔍
• sys_reset — reset uAP 🔄
• bss_start — start the BSS 🚀
• bss_stop — stop the BSS 🛑
• sta_deauth — deauth client, bye bestie 👋
• sta_list — display list of clients 📋
• sys_cfg_ap_mac_address — set/get uAP mac address 🏷️
• sys_cfg_ssid — set/get uAP ssid 📡
• sys_cfg_beacon_period — set/get uAP beacon period ⏱️
• sys_cfg_dtim_period — set/get uAP dtim period ⏳
• sys_cfg_channel — set/get uAP radio channel 📶
• sys_cfg_scan_channels — set/get uAP radio channel list 🗒️
• sys_cfg_rates — set/get uAP rates 💫
• sys_cfg_rates_ext — set/get uAP rates (extended) — yes the extended one, she's different 🦋
• sys_cfg_tx_power — set/get uAP tx power ⚡
• sys_cfg_bcast_ssid_ctl — set/get uAP broadcast ssid 📢
• sys_cfg_preamble_ctl — get uAP preamble (just get, bestie, no set here) 👀
• sys_cfg_antenna_ctl — set/get uAP tx/rx antenna 📡
• sys_cfg_rts_threshold — set/get uAP rts threshold 📏
• sys_cfg_frag_threshold — set/get uAP frag threshold 🧩
• sys_cfg_radio_ctl — set/get uAP radio on/off 🔘
• sys_cfg_tx_data_rate — set/get uAP tx rate 🏃
• sys_cfg_mcbc_data_rate — set/get uAP MCBC rate 📊
• sys_cfg_rsn_replay_prot — set/get RSN replay protection 🛡️
• sys_cfg_pkt_fwd_ctl — set/get uAP packet forwarding 📦
• sys_cfg_sta_ageout_timer — set/get station ageout timer ⌛
• sys_cfg_auth — set/get uAP authentication mode 🔐
• sys_cfg_protocol — set/get uAP security protocol 🔒
• sys_cfg_wep_key — set/get uAP wep key 🔑
• sys_cfg_cipher — set/get uAP WPA/WPA cipher 🧬
• sys_cfg_wpa_passphrase — set/get uAP WPA or WPA2 passphrase 🤫
• sys_cfg_group_rekey_timer — set/get uAP group re-key time 🔁
• sys_cfg_max_sta_num — set/get uAP max station number 🧮
• sys_cfg_retry_limit — set/get uAP retry limit number 🔂
• sys_cfg_custom_ie — set/get custom IE configuration 🎨
• sta_filter_table — set/get uAP mac filter 🚦
• regrdwr — read/write register command 🧠
• memaccess — read/write to a memory address command 🗄️
• rdeeprom — read EEPROM 📖
• cfg_data — get/set configuration file from/to firmware 📁
• sys_debug — set/get debug parameter 🐛
• sys_cfg_80211d — set/get 802.11D info 🌍
• uap_stats — get uAP stats 📈
• powermode — set/get uAP power mode 🔌
• coex_config — set/get uAP BT coex configuration 🎧

💜 SEE ALSO 💜

• uapevent(1).

and that's the whole thing!! this manual page was written by Bdale Garbee <bdale@gag.com>, for the Debian project (and may be used by others) — shoutout to the icon, fr fr. 🫶

okay final vibe check: this page is from July 20, 2011, and it's the uaputl(1) page from the General Commands Manual. mwah. slay. 💅✨🎀