tpm2_nvextend(1)

📦
version 5.8 · 10 versions
, in arch rolling

✨ NAME ✨

tpm2_nvextend(1) — from the General Commands Manual, bestie — Extend an Non-Volatile (NV) index like it was a PCR. 💖

🦋 SYNOPSIS 🦋

tpm2_nvextend [OPTIONS] [ARGUMENT]

💅 DESCRIPTION 💅

Okay so tpm2_nvextend(1) is literally here to extend a Non-Volatile (NV) index like it was a PCR. The NV index must be of type extend, and that’s specified via the nt field when you create the NV space with tpm2_nvdefine(1). You can point at the index as a raw handle or as an offset value into the NV handle range TPM2_HR_NV_INDEX, passed as an argument. Slay. 💅

🎀 OPTIONS 🎀

  • -C, --hierarchy=OBJECT — tells the tool which hierarchy to use for authorization. Supported options are:
    • o — for TPM_RH_OWNER
    • p — for TPM_RH_PLATFORM
    • <num> — where a hierarchy handle or nv-index may be used. When -C isn’t explicitly passed, the index handle will be used to authorize against the index. The index auth value is set via the -p option to tpm2_nvdefine(1). 🫶
  • -P, --auth=AUTH — specifies the authorization value for the hierarchy. 🔐
  • -i, --input=FILE — specifies the input file with data to extend to the NV index. ✨
  • --cphash=FILE — file path to record the hash of the command parameters. This is commonly termed as cpHash. NOTE: when this option is selected, the tool will not actually execute the command, it simply returns a cpHash, unless rphash is also required. 👀
  • --rphash=FILE — file path to record the hash of the response parameters. This is commonly termed as rpHash. 🌀
  • -S, --session=FILE — the session created using tpm2_startauthsession. Multiple of these can be specified. For example, you can have one session for auditing and another for encryption/decryption of the parameters. 💖
  • -n, --name=FILE — the name of the NV index that must be provided when only calculating the cpHash without actually dispatching the command to the TPM. 🏷️
  • ARGUMENT — the command line argument specifies the NV index or offset number. 📍

📚 References 📚

🧚 Context Object Format 🧚

The type of a context object — whether it’s a handle or a file name — is determined according to this logic in-order:

  • If the argument is a file path, then the file is loaded as a restored TPM transient object. 🗂️
  • If the argument is a prefix match on one of:
    • owner: — the owner hierarchy
    • platform: — the platform hierarchy
    • endorsement: — the endorsement hierarchy
    • lockout: — the lockout control persistent object
  • If the argument argument can be loaded as a number it will be treat as a handle, e.g. 0x81010013, and used directly._OBJECT_. 🤯

🔥 Authorization Formatting 🔥

Authorization for use of an object in TPM2.0 can come in 3 different forms:

  1. Password
  2. HMAC
  3. Sessions
NOTE: “Authorizations default to the EMPTY PASSWORD when not specified”. 🚨

For authentication with auth values, the tool commands implicitly generate an HMAC session. Thus passwords are not transmitted unencrypted. This does not apply to passwords defined for objects. In this case, an HMAC session should be used (see tpm2_startauthsession(1)). 💜

🍓 Passwords 🍓

Passwords are interpreted in the following forms below using prefix identifiers.

Note: by default passwords are assumed to be in the string form when they do not have a prefix.

⭐ String ⭐

A string password, specified by prefix str: or it’s absence (raw string without prefix) is not interpreted, and is directly used for authorization.

🌈 Examples 🌈

foobar
str:foobar

💫 Hex-string 💫

A hex-string password, specified by prefix hex:, is converted from a hexidecimal form into a byte array form, thus allowing passwords with non-printable and/or terminal un-friendly characters.

🌟 Example 🌟

hex:1122334455667788

📁 File 📁

A file based password, specified be prefix file:, should be the path of a file containing the password to be read by the tool or a - to use stdin. Storing passwords in files prevents information leakage, passwords passed as options can be read from the process list or common shell history features.

🌈 Examples 🌈

# to use stdin and be prompted
file:-

# to use a file from a path
file:path/to/password/file

# to echo a password via stdin:
echo foobar | tpm2_tool -p file:-

# to use a bash here-string via stdin:

tpm2_tool -p file:- <<< foobar

💬 Sessions 💬

When using a policy session to authorize the use of an object, prefix the option argument with the session keyword. Then indicate a path to a session file that was created with tpm2_startauthsession(1). Optionally, if the session requires an auth value to be sent with the session handle (eg policy password), then append a + and a string as described in the Passwords section.

🌈 Examples 🌈

To use a session context file called session.ctx.

session:session.ctx

To use a session context file called session.ctx AND send the authvalue mypassword.

session:session.ctx+mypassword

To use a session context file called session.ctx AND send the HEX authvalue 0x11223344.

session:session.ctx+hex:11223344

🧬 PCR Authorizations 🧬

You can satisfy a PCR policy using the pcr: prefix and the PCR minilanguage. The PCR minilanguage is as follows:

<pcr-spec>=<raw-pcr-file>

The PCR spec is documented in in the section “PCR bank specifiers”.

The raw-pcr-file is an optional argument that contains the output of the raw PCR contents as returned by tpm2_pcrread(1).

💜 PCR bank specifiers 💜

🌟 Examples 🌟

To satisfy a PCR policy of sha256 on banks 0, 1, 2 and 3 use a specifier of:

pcr:sha256:0,1,2,3

specifying AUTH.

🌈 COMMON OPTIONS 🌈

This collection of options are common to many programs and provide information that many users may expect. 🫶

  • -h, --help=[man|no-man] — display the tools manpage. By default, it attempts to invoke the manpager for the tool, however, on failure will output a short tool summary. This is the same behavior if the “man” option argument is specified, however if explicit “man” is requested, the tool will provide errors from man on stderr. If the “no-man” option if specified, or the manpager fails, the short options will be output to stdout. To successfully use the manpages feature requires the manpages to be installed or on MANPATH, See man(1) for more details. 📖
  • -v, --version — display version information for this tool, supported tctis and exit. 💫
  • -V, --verbose — increase the information that the tool prints to the console during its execution. When using this option the file and line number are printed. 🔍
  • -Q, --quiet — silence normal tool output to stdout. 🤫
  • -Z, --enable-errata — enable the application of errata fixups. Useful if an errata fixup needs to be applied to commands sent to the TPM. Defining the environment TPM2TOOLS_ENABLE_ERRATA is equivalent. 🛠️
  • -z, --pwd-session — use password session instead of a HMAC session for authentication. A clear text password is passed to the TPM to authorize the action. This option can be used to avoid problems when unsalted sessions are used in OpenSSL FIPS mode. If auth values are used a salted session should be used for authentication. 🔑
  • -R, --autoflush — enable autoflush for transient objects created by the command. If a parent object is loaded from a context file also the transient parent object will be flushed. Autoflush can also be activated if the environment variable TPM2TOOLS_AUTOFLUSH is is set to yes or true. information many users may expect. 🚿

🔌 TCTI Configuration 🔌

The TCTI or “Transmission Interface” is the communication mechanism with the TPM. TCTIs can be changed for communication with TPMs across different mediums.

To control the TCTI, the tools respect:

  1. The command line option -T or --tcti
  2. The environment variable: TPM2TOOLS_TCTI.

Note: the command line option always overrides the environment variable. 👑

The current known TCTIs are:

  • tabrmd — the resource manager, called tabrmd. Note that tabrmd and abrmd as a tcti name are synonymous. 🧠
  • mssim — typically used for communicating to the TPM software simulator. 🖥️
  • device — used when talking directly to a TPM device file. 🔌
  • none — do not initalize a connection with the TPM. Some tools allow for off-tpm options and thus support not using a TCTI. Tools that do not support it will error when attempted to be used without a TCTI connection. Does not support ANY options and MUST BE presented as the exact text of “none”. 🚫

The arguments to either the command line option or the environment variable are in the form:

<tcti-name>:<tcti-option-config>

Specifying an empty string for either the <tcti-name> or <tcti-option-config> results in the default being used for that portion respectively. ✨

🧚 TCTI Defaults 🧚

When a TCTI is not specified, the default TCTI is searched for using dlopen(3) semantics. The tools will search for tabrmd, device and mssim TCTIs IN THAT ORDER and USE THE FIRST ONE FOUND. You can query what TCTI will be chosen as the default by using the -v option to print the version information. The “default-tcti” key-value pair will indicate which of the aforementioned TCTIs is the default. 🎯

🦋 Custom TCTIs 🦋

Any TCTI that implements the dynamic TCTI interface can be loaded. The tools internally use dlopen(3), and the raw tcti-name value is used for the lookup. Thus, this could be a path to the shared library, or a library name as understood by dlopen(3) semantics. 🌟

💅 TCTI OPTIONS 💅

okay so this collection of options is literally how you configure the various known TCTI modules available, bestie:

  • device — for the device TCTI, you can specify the TPM character device file that the device TCTI uses. The default is /dev/tpm0, no cap.

Example: -T device:/dev/tpm0 or export TPM2TOOLS_TCTI=“device:/dev/tpm0”

  • mssim — for the mssim TCTI, you can specify the domain name or IP address and port number used by the simulator. The defaults are 127.0.0.1 and 2321.

Example: -T mssim:host=localhost,port=2321 or export TPM2TOOLS_TCTI=“mssim:host=localhost,port=2321”

  • abrmd — for the abrmd TCTI, the configuration string format is a series of simple key value pairs separated by a , character. Each key and value string are separated by a = character.
    • TCTI abrmd supports two keys:
      1. bus_name : The name of the tabrmd service on the bus (a string).
      2. bus_type : The type of the dbus instance (a string) limited to session and system.

Specify the tabrmd tcti name and a config string of bus_name=com.example.FooBar:

\--tcti=tabrmd:bus_name=com.example.FooBar

Specify the default (abrmd) tcti and a config string of bus_type=session:

\--tcti:bus_type=session
⚠️ NOTE: abrmd and tabrmd are synonymous. the various known TCTI modules.

🧪 EXAMPLES 🧪

OR 0xbadc0de into an index of 0’s

tpm2_nvdefine -C o -a "nt=extend|ownerread|policywrite|ownerwrite|writedefine" 1

echo 'my data' | tpm2_nvextend -C o -i- 1

tpm2_nvread -C o 1 | xxd -p -c32
db7472e3fe3309b011ec11565bce4ea6668cc8ecdef7e6fdcda5206687af3f43

🌈 Returns 🌈

Tools can return any of the following codes — exit-status vibe check, bestie:

  • 0 — Success.
  • 1 — General non-specific error.
  • 2 — Options handling error.
  • 3 — Authentication error.
  • 4 — TCTI related error.
  • 5 — Non supported scheme. Applicable to tpm2_testparams.

💀 BUGS 💀

Github Issues

🫶 HELP 🫶

See the Mailing List

📜 License 📜

This work is licensed under the Creative Commons Attribution 4.0 International License (CC BY 4.0).

okay that’s the whole page, bestie 💖 — footer sign-off: source/version tpm2-tools, page tpm2_nvextend(1), and the date line (not shown in the footer text I got, so I’m not inventing one, periodt). Slay and stay caffeinated 🎀

📦 where this page comes from