SPICCTRL(1)

πŸ“¦ version 1.9, in fedora 43, fedora 44

πŸ’– NAME πŸ’–

okay so bestie, meet spicctrl β€” the Sony Vaio SPIC control program ✨ (it lives in the General Commands Manual, section 1, iykyk)


🌸 SYNOPSIS 🌸

spicctrl [-a|-b NUM|-B|-c|-C|-l NUM|-L|-p|-r|-R|-s|-S]

✨ DESCRIPTION ✨

so spicctrl is a lil utility that can use the Sony Programmable I/O Control device (SPIC), which is part of Sony Vaio's, to do a few simple things. it's giving tiny but mighty 🫢

currently, it can only be used to control the brightness on the LCD backlight, or print out the battery charge information. that's it. that's the whole gig πŸ’…

the amount of brightness of the LCD is given as a number ranging from 0 (most dim) to 255 (most bright). yes, 0 to 255, no in-between drama. periodt 🌈


πŸ’… OPTIONS πŸ’…

  • -a, --getacstatus β€” Get AC adaptor status (plugged in or not). like, is the charger in or not bestie πŸ”Œ
  • -b, --setbrightness=NUM β€” Set lcd screen brightness. πŸ‘‘
  • -B, --getbrightness β€” Get lcd screen brightness. ✨
  • -c, --getbat1capacity β€” Get the first battery full capacity. πŸ”‹
  • -C, --getbat2capacity β€” Get the second battery full capacity. πŸ”‹
  • -l, --setbluetoothpower=NUM β€” Set the bluetooth device power state (0=off, 1=on). πŸ¦‹
  • -L, --getbluetoothpower β€” Get the bluetooth device power state (0=off, 1=on). πŸ¦‹
  • -p, --powerstatus β€” Prints out a battery summary line. πŸ’–
  • -r, --getbat1remaining β€” Get the first battery remaining capacity. πŸ“
  • -R, --getbat2remaining β€” Get the second battery remaining capacity. πŸ“
  • -s, --getbat1status β€” Get the first battery status (present or not). ⭐
  • -S, --getbat2status β€” Get the second battery status (present or not). ⭐
  • -f, --setfanstatus=NUM β€” Set fan speed (0=off, other values progressively increase the speed of the fan β€” note that there are only about 6 speed levels that map to the 8 bits). 🌬️
  • -F, --getfanstatus β€” Get fan speed (0 should be OFF). πŸ’€
  • -T, --gettempstatus β€” Get temperature (Degree C) β€” useful under APM when there is no way to get the temperature otherwise. 🌑️

πŸŽ€ FILES πŸŽ€

  • /dev/sonypi β€” sonypi interface device file. You must be able to write to the file to use this program. no write permission, no vibes, that's the rule πŸ™ˆ

🫢 AUTHOR 🫢

spicctrl was written by Stelian Pop <stelian@popies.net>, and this man page was written by Joey Hess <joey@kitenet.net>. legends only πŸ‘‘


and that's the whole page bestie, mwah πŸ’‹ this one's dated 11 December 2001, and it's from the SPICCTRL(1) manual β€” go be the main character of your own laptop, slay πŸ§šπŸ’œ

πŸ“¦ where this page comes from