gnutv(1)

💖 NAME 💖

gnutv — a digital tv utility 🫶

🌸 SYNOPSIS 🌸

gnutv [options]<channelname>

✨ DESCRIPTION ✨

Bestie, this manual page documents briefly the gnutv commands. Like, it's not gonna hold your hand through everything, but it's gonna tell you what's up. 🎀

gnutv is a digital tv utility. That's the whole vibe. 📺

💅 OPTIONS 💅

Okay so here's the full menu of flags — no skips, no skimming, we're covering every single one:

• -adapter <id> — which adapter to use (default 0)
• -frontend <id> — which frontend to use (default 0)
• -demux <id> — which demux to use (default 0)
• -caslotnum <id> — which ca slot number to use (default 0)
• -channels <filename> — the channels.conf file
• -secfile <filename> — optional sec.conf file
• -secid <secid> — the ID of the SEC configuration to use, and it's gotta be one of these icons only:
  • UNIVERSAL (default) — Europe, 10800 to 11800 MHz and 11600 to 12700 Mhz, Dual LO, loband 9750, hiband 10600 MHz
  • DBS — Expressvu, North America, 12200 to 12700 MHz, Single LO, 11250 MHz
  • STANDARD — 10945 to 11450 Mhz, Single LO, 10000 Mhz
  • ENHANCED — Astra, 10700 to 11700 MHz, Single LO, 9750 MHz
  • C-BAND — Big Dish, 3700 to 4200 MHz, Single LO, 5150 Mhz
  • C-MULTI — Big Dish - Multipoint LNBf, 3700 to 4200 MHz, Dual LO, H:5150MHz, V:5750MHz
  • One of the sec definitions from the secfile if supplied
• -out decoder — output to hardware decoder (this is the default, she's the main character 👑)
• -out decoderabypass — output to hardware decoder using audio bypass
• -out dvr — output stream to dvr device
• -out null — do not output anything (silence, iconic, no notes 💀)
• -out stdout — output to stdout
• -out file <filename> — output stream to file
• -out udp <address> <port> — output stream to address:port using udp
• -out udpif <address> <port> <interface> — output stream to address:port using udp forcing the specified interface
• -out rtp <address> <port> — output stream to address:port using udp-rtp
• -out rtpif <address> <port> <interface> — output stream to address:port using udp-rtp forcing the specified interface
• -timeout <secs> — number of seconds to output channel for. Heads up: 0 means exit immediately after successful tuning, and the default is to output forever ♾️
• -cammenu — show the CAM menu
• -nomoveca — do not attempt to move CA descriptors from stream to programme level
• -h — print this help text

This manual page was written by Uwe Bugla <uwe.bugla@gmx.de>. 🫡

And that's a wrap, bestie! This lil masterpiece lives in the General Commands Manual, version 1, dated February 14, 2010 — and the page signs off as gnutv(1). Go tune something cute. 🦋💜