GDAL-RASTER-CONTOUR(1)

📦
version 3.13.3 · 7 versions
, in alpine 3.24, arch rolling, ubuntu stonking

💖 gdal-raster-contour 💖

okay bestie so this is the manual page for gdal-raster-contour (1), part of the GDAL fam, and it's literally about turning a raster elevation model — you know, a DEM — into a vector contour. maps girlies rise up 🗺️✨

Added in version 3.11. she's newer, she's fresh, she's giving elevation queen.

✨ SYNOPSIS ✨

Usage: gdal raster contour [OPTIONS] <INPUT> <OUTPUT>

Creates a vector contour from a raster elevation model (DEM).

🎀 Positional arguments

  • -i, --input <INPUT> — the input raster datasets. required, no skips, and heads up: not available in pipelines.
  • -o, --output <OUTPUT> — the output vector dataset. also required, also not available in pipelines.

🫶 Common Options

  • -h, --help — shows the help message and dips. byeeeee 💅
  • --json-usage — prints the usage as a JSON document and exits. machine-readable slay.
  • --config <KEY>=<VALUE> — configuration option. may be repeated.
  • -q, --quiet — quiet mode: no progress bar, no warning message. not available in pipelines.

🌸 Options

  • -f, --of, --format, --output-format <OUTPUT-FORMAT> — output format. and yes bestie, "GDALG" is allowed 💅 not available in pipelines.
  • --co, --creation-option <KEY>=<VALUE> — creation option. may be repeated. not available in pipelines.
  • --lco, --layer-creation-option <KEY>=<VALUE> — layer creation option. may be repeated. not available in pipelines.
  • --overwrite — says yes to overwriting an existing output dataset. not available in pipelines.
  • --output-layer <OUTPUT-LAYER> — output layer name.
  • -b, --band <BAND> — input band, using a 1-based index. default is 1.
  • --elevation-name <ELEVATION-NAME> — name of the elevation field.
  • --min-name <MIN-NAME> — name of the minimum elevation field.
  • --max-name <MAX-NAME> — name of the maximum elevation field.
  • --3d — forces 3D vectors instead of 2D. main character geometry energy ✨
  • --input-nodata <INPUT-NODATA> — input pixel value to treat as 'nodata'.
  • --interval <INTERVAL> — elevation interval between contours. mutually exclusive with --levels, --exp-base.
  • --levels <LEVELS> — list of contour levels. may be repeated. mutually exclusive with --interval, --exp-base.
  • -e, --exp-base <EXP-BASE> — base for exponential contour level generation. mutually exclusive with --interval, --levels.
  • --off, --offset <OFFSET> — offset to apply to contour levels.
  • -p, --polygonize — creates polygons instead of lines. glow-up from line to shape 🔥
  • --group-transactions <GROUP-TRANSACTIONS> — group n features per transaction. default is 100 000.

💜 Advanced Options

  • --if, --input-format <INPUT-FORMAT> — input formats. may be repeated. not available in pipelines.
  • --oo, --open-option <KEY>=<VALUE> — open options. may be repeated. not available in pipelines.
  • --output-oo, --output-open-option <KEY>=<VALUE> — output open options. may be repeated. not available in pipelines.

🌈 DESCRIPTION 🌈

gdal raster contour creates a vector contour from a raster elevation model (DEM). that's the whole gig, and she does it flawlessly.

Since GDAL 3.12, this algorithm can be part of a gdal pipeline. pipeline bestie!! she can be a team player now 🫶

Added in version 3.12.

🦋 GDALG OUTPUT (ON-THE-FLY / STREAMED DATASET) 🦋

This program supports serializing the command line as a JSON file using the GDALG output format. The resulting file can then be opened as a vector dataset using the GDALG: GDAL Streamed Algorithm driver, and apply the specified pipeline in a on-the-fly / streamed way. no cap, streaming fr fr ✨

NOTE: however this algorithm is not natively streaming compatible. Consequently a in-memory temporary dataset will be generated, which may cause significant processing time at opening. so like… it works, but it's giving buffering. be patient bestie 😭

👑 PROGRAM-SPECIFIC OPTIONS 👑

  • --3d — forces the production of 3D vectors instead of 2D. Includes elevation at every vertex. every single vertex, she's thorough 💅
  • -b, --band <BAND> — picks a particular band to get the DEM from. Defaults to band 1.
  • --elevation-name <ELEVATION-NAME> — provides a name for the attribute in which to put the elevation. If not provided no elevation attribute is attached. Ignored in polygonal contouring (-p) mode.
  • -e, --exp-base <EXP-BASE> — generate levels on an exponential scale: base ^ k, for k an integer. Mutually exclusive with --interval, --levels.
  • --group-transactions <GROUP-TRANSACTIONS> — group n features per transaction (default 100 000).
  • --interval <INTERVAL> — elevation interval between contours. Mutually exclusive with --levels, --exp-base. The first contour will be generated at the first multiple of INTERVAL which is greater than the raster minimum value. ikyk 🎀
  • --levels <LEVELS> — list of contour levels. MIN and MAX are special values that represent the minimum and maximum values in the raster. When --polygonize is used, the specified values are used as bounds of the generated polygons. Mutually exclusive with --interval, --exp-base.
  • --max-name <MAX-NAME> — provides a name for the attribute in which to put the maximum elevation. If not provided no maximum elevation attribute is attached. Ignored in polygonal contouring (-p) mode.
  • --min-name <MIN-NAME> — provides a name for the attribute in which to put the minimum elevation. If not provided no minimum elevation attribute is attached. Ignored in polygonal contouring (-p) mode.
  • --off, --offset <OFFSET> — offset from zero relative to which to interpret intervals.
  • --nln, --output-layer <OUTPUT-LAYER> — provides a name for the output vector layer. Defaults to "contour".
  • -p, --polygonize — create polygons instead of lines.
  • --input-nodata <INPUT-NODATA> — input pixel value to treat as 'nodata'.

💖 STANDARD OPTIONS 💖

  • --co, --creation-option <NAME>=<VALUE> — many formats have one or more optional creation options that can be used to control particulars about the file created. For instance, the GeoTIFF driver supports creation options to control compression, and whether the file should be tiled.

May be repeated.

The creation options available vary by format driver, and some simple formats have no creation options at all. A list of options supported for a format can be listed with the --formats command line option but the documentation for the format is the definitive source of information on driver creation options. See Raster drivers format specific documentation for legal creation options for each format.

  • --if, --input-format <format> — format/driver name to be attempted to open the input file(s). It is generally not necessary to specify it, but it can be used to skip automatic driver detection, when it fails to select the appropriate driver. This option can be repeated several times to specify several candidate drivers. Note that it does not force those drivers to open the dataset. In particular, some drivers have requirements on file extensions.

May be repeated.

  • --lco, --layer-creation-option <NAME>=<VALUE> — many formats have one or more optional layer creation options that can be used to control particulars about the layer created. For instance, the GeoPackage driver supports layer creation options to control the feature identifier or geometry column name, setting the identifier or description, etc.

May be repeated.

The layer creation options available vary by format driver, and some simple formats have no layer creation options at all. A list of options supported for a format can be listed with the --formats command line option but the documentation for the format is the definitive source of information on driver creation options. See Vector drivers format specific documentation for legal creation options for each format.

Note that layer creation options are different from dataset creation options. yes bestie, they're different, don't get it twisted 😤

  • --oo, --open-option <NAME>=<VALUE> — dataset open option (format specific).

May be repeated.

  • --output-open-option, --output-oo <NAME>=<VALUE> — Added in version 3.12.

Dataset open option for output dataset (format specific).

May be repeated.

  • -f, --of, --format, --output-format <OUTPUT-FORMAT> — which output vector format to use. Allowed values may be given by
gdal --formats | grep vector | grep rw | sort
  • --overwrite — allow program to overwrite existing target file or dataset. Otherwise, by default, gdal errors out if the target file or dataset already exists. so like, she WILL yell at you 💀

⭐ RETURN STATUS CODE ⭐

The program returns status code 0 in case of success, and non-zero in case of error (non-blocking errors emitted as warnings are considered as a successful execution). periodt. 💅

🍓 EXAMPLES 🍓

Example 1: Create contour lines from a raster elevation model

The following example creates contour lines from a raster elevation model:

gdal raster contour --interval 100 elevation.tif contour.shp

This will create a shapefile named contour.shp with contour lines at 100 meter intervals. iconic 🎀

Example 2: Create contour polygons from a raster elevation model with custom attributes and fixed levels

The following example creates contour polygons from a raster elevation model with custom attributes and fixed levels:

gdal raster contour --levels MIN,100,200,MAX --polygonize --min-name MIN --max-name MAX elevation.tif contour.shp

This will create a shapefile named contour.shp with contour polygons from the minimum raster value to 100, and from 100 to 200 and from 200 to the maximum value, and with attributes MIN, and MAX. she ate that fr fr 🔥

🌸 AUTHOR 🌸

Alessandro Pasotti <elpaso@itopen.it> — the actual legend who made this happen, show some respect 🫶

1998-2026

okay and that's the whole page bestie, no notes, she's perfect. this was GDAL-RASTER-CONTOUR(1) from the GDAL manual, dated Aug 18, 2026 — go contour something gorgeous, ily, bye 💖✨🌈

📦 where this page comes from