STRUCT CY8C95X0_PINCTRL(9)

💅 struct cy8c95x0_pinctrl(9) — the driver data glowie ✨

okay so bestie, welcome to the Kernel API Manual entry for struct cy8c95x0_pinctrl 💖 this is literally just the driver data struct, and honestly? it's giving organized queen energy. every field is a little drawer in the pinctrl dresser, and we're opening all of them 🎀

🌸 SYNOPSIS 🌸

here's the whole struct, bestie — copied exactly, no cap, do not touch:

struct cy8c95x0_pinctrl {
    struct regmap *regmap;
    struct mutex irq_lock;
    struct mutex i2c_lock;
    unsigned long irq_mask[BITS_TO_LONGS( MAX_LINE)];
    unsigned long irq_trig_raise[BITS_TO_LONGS( MAX_LINE)];
    unsigned long irq_trig_fall[BITS_TO_LONGS( MAX_LINE)];
    unsigned long irq_trig_low[BITS_TO_LONGS( MAX_LINE)];
    unsigned long irq_trig_high[BITS_TO_LONGS( MAX_LINE)];
    unsigned long push_pull[BITS_TO_LONGS( MAX_LINE)];
    unsigned long map[BITS_TO_LONGS( MAX_LINE)];
    unsigned int nport;
    struct gpio_chip gpio_chip;
    struct device *dev;
    struct pinctrl_dev *pctldev;
    struct pinctrl_desc pinctrl_desc;
    unsigned int tpin;
    struct gpio_desc *gpio_reset;
 };

like… look at all those BITS_TO_LONGS( MAX_LINE) bitmaps. she's thriving on bitmaps 🔥

🦋 Members 🦋

time for the member-by-member vibe check, one icon at a time 👑

• regmap — the device's regmap. only direct access registers bestie, don't get it twisted 🙈
• irq_lock — the IRQ bus lock 🔒
• i2c_lock — a mutex you gotta hold while you're using the regmap. hold her gently 🫶
• irq_mask — the I/O bits affected by interrupts ⚡
• irq_trig_raise — the I/O bits affected by raising voltage level ⬆️
• irq_trig_fall — the I/O bits affected by falling voltage level ⬇️
• irq_trig_low — the I/O bits affected by a low voltage level 🧊
• irq_trig_high — the I/O bits affected by a high voltage level 🔥
• push_pull — the I/O bits configured as push pull driver 💪
• map — the mask used to compensate for Gport2 width 📏 (yes, width compensation. she's doing math for you, say thank you)
• nport — number of Gports in this chip 🔢
• gpio_chip — the gpiolib chip 🐣
• dev — struct device 📱
• pctldev — the pin controller device 🎛️
• pinctrl_desc — the pin controller description 📝 (yes it's <noun> and pinctrl_desc, iconique naming, we stan)
• tpin — total number of pins 📌
• gpio_reset — a GPIO line handler that can reset the IC 🔄 like a little reset button but classy

⭐ SEE ALSO ⭐

go read these next, bestie, they're the whole friend group 👯‍♀️

• Kernel file ./drivers/pinctrl/pinctrl-cy8c95x0.c 📂
• cy8c95x0_regmap_write_bits(9), cy8c95x0_regmap_update_bits(9), cy8c95x0_regmap_read_bits(9) ✨

ok real talk — this page lives in ./drivers/pinctrl, which is the source dir, and the date on it is October 2026. so like… future-coded manpage, main character energy fr fr 👑

that's the whole struct, no skips, no summaries, we ate and left no crumbs 💅💖 byeee 🦋🌸