ENUM NL80211_REG_RULE_ATTR(9)
β¨ NAME β¨
enum nl80211_reg_rule_attr β regulatory rule attributes π
(this is a page from the Kernel API Manual, bestie, so buckle up)
πΈ SYNOPSIS πΈ
enum nl80211_reg_rule_attr {
__NL80211_REG_RULE_ATTR_INVALID ,
NL80211_ATTR_REG_RULE_FLAGS ,
NL80211_ATTR_FREQ_RANGE_START ,
NL80211_ATTR_FREQ_RANGE_END ,
NL80211_ATTR_FREQ_RANGE_MAX_BW ,
NL80211_ATTR_POWER_RULE_MAX_ANT_GAIN ,
NL80211_ATTR_POWER_RULE_MAX_EIRP ,
NL80211_ATTR_DFS_CAC_TIME ,
NL80211_ATTR_POWER_RULE_PSD ,
__NL80211_REG_RULE_ATTR_AFTER_LAST ,
NL80211_REG_RULE_ATTR_MAX
};
π Constants π
okay so these are the attribute numbers that describe one single regulatory rule β like the little envelope of facts about "hey, this chunk of spectrum exists, here's what you're allowed to do in it" π no cap, they all matter:
__NL80211_REG_RULE_ATTR_INVALIDβ attribute number0is reserved. that's it, that's the whole vibe. it's the don't touch slot πNL80211_ATTR_REG_RULE_FLAGSβ a set of flags which specify additional considerations for a given frequency range. These are the enumnl80211_reg_rule_flags. basically the little stickers you slap on the rule that change how it behaves π¦NL80211_ATTR_FREQ_RANGE_STARTβ starting frequency for the regulatory rule in KHz. β οΈ heads up: this is not a center of frequency but an actual regulatory band edge. like, the literal edge of the band, not the middle. iykyk πNL80211_ATTR_FREQ_RANGE_ENDβ ending frequency for the regulatory rule in KHz. and same energy as its sibling: this is not a center of frequency but an actual regulatory band edge π«ΆNL80211_ATTR_FREQ_RANGE_MAX_BWβ maximum allowed bandwidth for this frequency range, in KHz. the width limit, periodt β¨NL80211_ATTR_POWER_RULE_MAX_ANT_GAINβ the maximum allowed antenna gain for a given frequency range. The value is inmBi(100 * dBi). and bestie listen β If you don't have one then don't send this. fr fr, just leave it out πNL80211_ATTR_POWER_RULE_MAX_EIRPβ the maximum allowed EIRP for a given frequency range. The value is inmBm(100 * dBm). πΆNL80211_ATTR_DFS_CAC_TIMEβ DFS CAC time in milliseconds. If not present or0default CAC time will be used. so like, zero means "you choose for me" π«NL80211_ATTR_POWER_RULE_PSDβ power spectral density (indBm). This could be negative. yes bestie, negative values are absolutely allowed, don't panic π__NL80211_REG_RULE_ATTR_AFTER_LASTβ internal use. nothing to see here, move along, this one's not for you πNL80211_REG_RULE_ATTR_MAXβ highest regulatory rule attribute number currently defined. the ceiling, the final boss, the top of the number stack π
π¦ SEE ALSO π¦
first up, the source of truth itself:
Kernel file ./include/uapi/linux/nl80211.h
and now the whole entire friend group (yes, all of them, i'm not skipping a single one π):
Station handling(9)Frame transmission/registration support(9)Virtual interface / concurrency capabilities(9)packet coalesce support(9)WPA/WPA2 EAPOL handshake offload(9)FILS shared key authentication offload(9)SAE authentication offload(9)VLAN offload support for setting group keys and binding STAs to VLANs(9)TID configuration(9)FILS shared key crypto offload(9)Multi-Link Operation(9)OWE DH IE handling offload(9)enum nl80211_commands(9)enum nl80211_attrs(9)enum nl80211_iftype(9)enum nl80211_sta_flags(9)enum nl80211_sta_p2p_ps_status(9)struct nl80211_sta_flag_update(9)enum nl80211_he_gi(9)enum nl80211_he_ltf(9)enum nl80211_he_ru_alloc(9)enum nl80211_eht_gi(9)enum nl80211_eht_ltf(9)enum nl80211_eht_ru_alloc(9)enum nl80211_rate_info(9)enum nl80211_sta_bss_param(9)enum nl80211_sta_info(9)enum nl80211_tid_stats(9)enum nl80211_txq_stats(9)enum nl80211_mpath_flags(9)enum nl80211_mpath_info(9)enum nl80211_band_iftype_attr(9)enum nl80211_band_attr(9)enum nl80211_nan_phy_cap_attr(9)enum nl80211_wmm_rule(9)enum nl80211_frequency_attr(9)enum nl80211_bitrate_attr(9)enum nl80211_reg_initiator(9)enum nl80211_reg_type(9)enum nl80211_sched_scan_match_attr(9)enum nl80211_reg_rule_flags(9)enum nl80211_dfs_regions(9)enum nl80211_user_reg_hint_type(9)enum nl80211_survey_info(9)enum nl80211_mntr_flags(9)enum nl80211_mesh_power_mode(9)enum nl80211_meshconf_params(9)enum nl80211_mesh_setup_params(9)enum nl80211_txq_attr(9)enum nl80211_channel_type(9)enum nl80211_key_mode(9)enum nl80211_chan_width(9)enum nl80211_bss_scan_width(9)enum nl80211_bss_use_for(9)enum nl80211_bss_cannot_use_reasons(9)enum nl80211_bss(9)enum nl80211_bss_status(9)enum nl80211_auth_type(9)enum nl80211_key_type(9)enum nl80211_mfp(9)enum nl80211_key_default_types(9)enum nl80211_key_attributes(9)enum nl80211_tx_rate_attributes(9)struct nl80211_txrate_vht(9)struct nl80211_txrate_he(9)struct nl80211_txrate_eht(9)enum nl80211_band(9)enum nl80211_ps_state(9)enum nl80211_attr_cqm(9)enum nl80211_cqm_rssi_threshold_event(9)enum nl80211_tx_power_setting(9)enum nl80211_tid_config(9)enum nl80211_packet_pattern_attr(9)struct nl80211_pattern_support(9)enum nl80211_wowlan_triggers(9)TCP connection wakeup(9)struct nl80211_wowlan_tcp_data_seq(9)struct nl80211_wowlan_tcp_data_token(9)struct nl80211_wowlan_tcp_data_token_feature(9)enum nl80211_wowlan_tcp_attrs(9)struct nl80211_coalesce_rule_support(9)enum nl80211_attr_coalesce_rule(9)enum nl80211_coalesce_condition(9)enum nl80211_iface_limit_attrs(9)enum nl80211_if_combination_attrs(9)enum nl80211_plink_state(9)enum nl80211_plink_action(9)enum nl80211_rekey_data(9)enum nl80211_hidden_ssid(9)enum nl80211_sta_wme_attr(9)enum nl80211_pmksa_candidate_attr(9)enum nl80211_tdls_operation(9)enum nl80211_ap_sme_features(9)enum nl80211_feature_flags(9)enum nl80211_ext_feature_index(9)enum nl80211_probe_resp_offload_support_attr(9)enum nl80211_connect_failed_reason(9)enum nl80211_timeout_reason(9)enum nl80211_scan_flags(9)enum nl80211_acl_policy(9)enum nl80211_smps_mode(9)enum nl80211_radar_event(9)enum nl80211_dfs_state(9)enum nl80211_protocol_features(9)enum nl80211_crit_proto_id(9)enum nl80211_rxmgmt_flags(9)struct nl80211_vendor_cmd_info(9)enum nl80211_tdls_peer_capability(9)enum nl80211_sched_scan_plan(9)struct nl80211_bss_select_rssi_adjust(9)enum nl80211_bss_select_attr(9)enum nl80211_nan_function_type(9)enum nl80211_nan_publish_type(9)enum nl80211_nan_func_term_reason(9)enum nl80211_nan_func_attributes(9)enum nl80211_nan_srf_attributes(9)enum nl80211_nan_match_attributes(9)enum nl80211_nan_band_conf_attributes(9)enum nl80211_nan_conf_attributes(9)enum nl80211_external_auth_action(9)enum nl80211_ftm_responder_attributes(9)enum nl80211_preamble(9)enum nl80211_peer_measurement_type(9)enum nl80211_peer_measurement_status(9)enum nl80211_peer_measurement_req(9)enum nl80211_peer_measurement_resp(9)enum nl80211_peer_measurement_ftm_req_type(9)enum nl80211_peer_measurement_peer_attrs(9)enum nl80211_peer_measurement_attrs(9)enum nl80211_peer_measurement_ftm_capa(9)enum nl80211_peer_measurement_ftm_type_capa(9)enum nl80211_peer_measurement_ftm_req(9)enum nl80211_peer_measurement_ftm_failure_reasons(9)enum nl80211_peer_measurement_ftm_resp(9)enum nl80211_obss_pd_attributes(9)enum nl80211_bss_color_attributes(9)enum nl80211_iftype_akm_attributes(9)enum nl80211_fils_discovery_attributes(9)enum nl80211_unsol_bcast_probe_resp_attributes(9)enum nl80211_sae_pwe_mechanism(9)enum nl80211_sar_type(9)enum nl80211_sar_attrs(9)enum nl80211_sar_specs_attrs(9)enum nl80211_mbssid_config_attributes(9)enum nl80211_ap_settings_flags(9)enum nl80211_wiphy_radio_attrs(9)enum nl80211_wiphy_radio_freq_range(9)enum nl80211_s1g_short_beacon_attrs(9)enum nl80211_nan_capabilities(9)enum nl80211_nan_peer_map_attrs(9)
and that's the whole page, bestie π«Ά go forth and describe your spectrum correctly, and remember: band edges, not centers. slay π
this lil love letter to nl80211 came from ./include/uapi/linux and it's stamped October 2026 π mwah, go read the kernel headers, they miss you π
π¦ where this page comes from
- nixpkgs unstable: linux-manual 7.3.1
- π girlified by deepseek-ai/DeepSeek-V4.1-Flash-1017 on : a language model's rewrite of the original, under its terms