opaextractperf(8)

✨ opaextractperf — the IFSFFCLIRG girlies' fave 💖

okay so bestie, opaextractperf is from the IFSFFCLIRG manual set, section 8, and she is that girl. let me tell you everything 💅

🌸 NAME 🌸

opaextractperf

She gives you a report of all the performance counters, in CSV format — perfect for yeeting straight into a spreadsheet or letting other scripts parse her for further analysis. 🍓

Here's the tea on how she works: she generates a detailed opareport component summary report and pipes the result to opaxmlextract, pulling out element values for NodeDesc, SystemImageGUID, PortNum, and all the performance counters. Extraction happens only from the Systems portion of the report, which does not contain Neighbor information (the Neighbor and SMs portions are suppressed). no cap. 🔥

🦋 Syntax 🦋

opaextractperf [opareport  options]

💜 Options 💜

• --help — Produces full help text. your bestie always comes through with the instructions ✨
• opareport options — The following options are passed to opareport. This subset is considered typical and useful for this command. By design, the tool ignores the -o/--output report option. 👑
  • -h/--hfi hfi — Specifies the HFI, numbered 1..n. Using 0 specifies that the -p port port is a system-wide port number. Default is 0.
  • -p/--port port — Specifies the port, numbered 1..n. Using 0 specifies the first active port. Default is 0.
  • -X/--infile snapshot_input — Generates a report using the data in the snapshot_input file. snapshot_input must have been generated during a previous -o snapshot run. When used, the -s, -i, -C, and -a options are ignored. '-' may be used as the snapshot_input to specify stdin.
  • -T/--topology topology_input — Uses topology_input file to augment and verify fabric information. When used, various reports can be augmented with information not available electronically (such as cable labels). '-' may be used to specify stdin.
  • -i/--interval seconds — Obtains performance statistics over interval seconds. Clears all statistics, waits interval seconds, then generates report. Implies -s option. ⏳
  • -b / --begin date_time — Obtains past performance stats over an interval beginning at date_time. Implies -s option. date_time may be a time entered as HH:MM[:SS] or date as mm/dd/YYYY, dd.mm.YYYY, YYYY-mm-dd or date followed by time; for example, "2016-07-04 14:40". Relative times are taken as "x [second|minute|hour|day](s) ago.
  • -e / --end date_time — Obtains past performance stats over an interval ending at date_time. Implies -s option.

date_time may be a time entered as HH:MM[:SS] or date as mm/dd/YYYY, dd.mm.YYYY, YYYY-mm-dd or date followed by time; for example, "2016-07-04 14:40". Relative times are taken as "x [second|minute|hour|day](s) ago.

• -C/--clear — Clears performance statistics for all ports. Only statistics with error thresholds are cleared. A clear occurs after generating the report.
• -a/--clearall — Clears all performance statistics for all ports. 😭 goodbye data
• -M/--pmadirect — Accesses performance statistics using direct PMA.
• -A/--allports — Gets PortInfo for down switch ports. Uses direct SMA to get this data. If used with -M, also gets PMA stats for down switch ports.
• -F/--focus point — Specifies the focus area for report. Used for all reports except route to limit scope of report. Refer to Point Syntax for details.

🌈 -h and -p options permit a variety of selections: 🌈

• -h 0 — First active port in system (Default).
• -h 0 -p 0 — First active port in system.
• -h x — First active port on HFI x.
• -h x -p 0 — First active port on HFI x.
• -h 0 -p y — Port y within system (no matter which ports are active).
• -h x -p y — HFI x, port y.

🎀 Point Syntax 🎀

she's got so many ways to point at a thing, it's giving main character energy. here we go:

• gid:value — value is numeric port GID of form: subnet:guid.
• lid:value — value is numeric LID.
• lid:value:node — value is numeric LID, selects entire node with given LID.
• lid:value:port:value2 — value is numeric LID of node, value2 is port number.
• portguid:value — value is numeric port GUID.
• nodeguid:value — value is numeric node GUID.
• nodeguid:value1:port:value2 — value1 is numeric node GUID, value2 is port number.
• iocguid:value — value is numeric IOC GUID.
• iocguid:value1:port:value2 — value1 is numeric IOC GUID, value2 is port number.
• systemguid:value — value is numeric system image GUID.
• systemguid:value1:port:value2 — value1 is the numeric system image GUID, value2 is port number.
• ioc:value — value is IOC Profile ID String (IOC Name).
• ioc:value1:port:value2 — value1 is IOC Profile ID String (IOC Name), value2 is port number.
• iocpat:value — value is glob pattern for IOC Profile ID String (IOC Name).
• iocpat:value1:port:value2 — value1 is glob pattern for IOC Profile ID String (IOC Name), value2 is port number.
• ioctype:value — value is IOC type (SRP or OTHER).
• ioctype:value1:port:value2 — value1 is IOC type (SRP or OTHER); value2 is port number.
• node:value — value is node description (node name).
• node:value1:port:value2 — value1 is node description (node name), value2 is port number.
• nodepat:value — value is glob pattern for node description (node name).
• nodepat:value1:port:value2 — value1 is the glob pattern for the node description (node name), value2 is port number.
• nodedetpat:value — value is glob pattern for node details.
• nodedetpat:value1:port:value2 — value1 is the glob pattern for the node details, value2 is port number.
• nodetype:value — value is node type (SW or FI).
• nodetype:value1:port:value2 — value1 is node type (SW or FI), value2 is port number.
• rate:value — value is string for rate (25g, 50g, 75g, 100g), omits switch mgmt port 0.
• portstate:value — value is a string for state (down, init, armed, active, notactive, initarmed).
• portphysstate:value — value is a string for PHYs state (polling, disabled, training, linkup, recovery, offline, test)
• mtucap:value — value is MTU size (2048, 4096, 8192, 10240), omits switch mgmt port 0.
• labelpat:value — value is glob pattern for cable label.
• lengthpat:value — value is glob pattern for cable length.
• cabledetpat:value — value is glob pattern for cable details.
• cabinflenpat:value — value is glob pattern for cable info length.
• cabinfvendnamepat:value — value is glob pattern for cable info vendor name.
• cabinfvendpnpat:value — value is glob pattern for cable info vendor part number.
• cabinfvendrevpat:value — value is glob pattern for cable info vendor revision.
• cabinfvendsnpat:value — value is glob pattern for cable info vendor serial number.
• cabinftype:value — value is either optical, passive_copper, active_copper, or unknown.
• linkdetpat:value — value is glob pattern for link details.
• portdetpat:value — value is glob pattern for port details.
• sm — Specifies the master subnet manager (SM).
• smdetpat:value — value is glob pattern for SM details.
• route:point1:point2 — Specifies all ports along the routes between the two given points.
• led:value — value is either on or off for LED port beacon.
• linkqual:value — Specifies the ports with a link quality equal to value.
• linkqualLE:value — Specifies the ports with a link quality less than or equal to value.
• linkqualGE:value — Specifies the ports with a link quality greater than or equal to value.
• nodepatfile:FILENAME — Specifies the name of file with the list of nodepats or node descriptions.
• nodepairpatfile:FILENAME — Specifies the name of file with the list of node pairs, separated by a colon.
• ldr — Specifies the ports with a non-zero link down reason or neighbor link down reason.
• ldr:value — Specifies the ports with a link down reason or neighbor link down reason equal to value.

💫 the part of the script that calls opareport and opaxmlextract 💫

literally iconic, here she is:

opareport -o comps -s -x -d 10 $@ | opaxmlextract -d ;

-e NodeDesc -e SystemImageGUID -e PortNum -e XmitDataMB

-e XmitData -e XmitPkts -e RcvDataMB -e RcvData -e RcvPkts

-e SymbolErrors -e LinkErrorRecovery -e LinkDowned -e PortRcvErrors

-e PortRcvRemotePhysicalErrors -e PortRcvSwitchRelayErrors

-e PortXmitDiscards -e PortXmitConstraintErrors

-e PortRcvConstraintErrors -e LocalLinkIntegrityErrors

-e ExcessiveBufferOverrunErrors -e VL15Dropped -s Neighbor -s SMs

⭐ Example ⭐

opaextractperf

opaextractperf -h 1 -p 2

aaaand that's the whole vibe, bestie 🫶 go forth and spreadsheet your counters 💖

Copyright(C) 2015-2019 Intel Corporation — that's the source and version tag, and she's dated 2015–2019. mwah, periodt. 💅🌸✨