CREATE_SEQUENCE(7pg14)

okay bestie, welcome to the CREATE SEQUENCE(7) page from the PostgreSQL 14.24 Documentation — yes, the manual name is literally right there, no cap. This whole page is giving “define a new sequence generator” energy, and honestly? iconic. 💅✨

💖 NAME 💖

CREATE_SEQUENCE — define a new sequence generator. That’s the whole assignment: you’re making a fresh lil sequence generator, periodt. 🎀

✨ SYNOPSIS ✨

CREATE [ TEMPORARY | TEMP ] SEQUENCE [ IF NOT EXISTS ] name
    [ AS data_type ]
    [ INCREMENT [ BY ] increment ]
    [ MINVALUE minvalue | NO MINVALUE ] [ MAXVALUE maxvalue | NO MAXVALUE ]
    [ START [ WITH ] start ] [ CACHE cache ] [ [ NO ] CYCLE ]
    [ OWNED BY { table_name.column_name | NONE } ]

🌸 DESCRIPTION 🌸

CREATE SEQUENCE creates a new sequence number generator. This involves creating and initializing a new special single-row table with the name name. The generator will be owned by the user issuing the command. slay. 💖

If a schema name is given then the sequence is created in the specified schema. Otherwise it is created in the current schema. Temporary sequences exist in a special schema, so a schema name cannot be given when creating a temporary sequence. The sequence name must be distinct from the name of any other sequence, table, index, view, or foreign table in the same schema. iykyk, names gotta be unique in their lane. 🦋

After a sequence is created, you use the functions nextval, currval, and setval to operate on the sequence. These functions are documented in Section 9.17. 🫶

Although you cannot update a sequence directly, you can use a query like:

SELECT * FROM name;

to examine the parameters and current state of a sequence. In particular, the last_value field of the sequence shows the last value allocated by any session. (Of course, this value might be obsolete by the time it's printed, if other sessions are actively doing nextval calls.) lowkey a live-updates situation, so don’t be shocked if it’s already moved on. 😭

🎀 PARAMETERS 🎀

• TEMPORARY or TEMP — If specified, the sequence object is created only for this session, and is automatically dropped on session exit. Existing permanent sequences with the same name are not visible (in this session) while the temporary sequence exists, unless they are referenced with schema-qualified names. temporary vibe, temporary sequence. 💅
• IF NOT EXISTS — Do not throw an error if a relation with the same name already exists. A notice is issued in this case. Note that there is no guarantee that the existing relation is anything like the sequence that would have been created — it might not even be a sequence. so yeah, it might be a whole different creature bestie, be aware. 🙈
• name — The name (optionally schema-qualified) of the sequence to be created. 🌸
• data_type — The optional clause AS data_type specifies the data type of the sequence. Valid types are smallint, integer, and bigint. bigint is the default. The data type determines the default minimum and maximum values of the sequence. bigint is main character unless you say otherwise. 👑
• increment — The optional clause INCREMENT BY increment specifies which value is added to the current sequence value to create a new value. A positive value will make an ascending sequence, a negative one a descending sequence. The default value is 1. ⭐
• minvalue and NO MINVALUE — The optional clause MINVALUE minvalue determines the minimum value a sequence can generate. If this clause is not supplied or NO MINVALUE is specified, then defaults will be used. The default for an ascending sequence is 1. The default for a descending sequence is the minimum value of the data type. 🎀
• maxvalue and NO MAXVALUE — The optional clause MAXVALUE maxvalue determines the maximum value for the sequence. If this clause is not supplied or NO MAXVALUE is specified, then default values will be used. The default for an ascending sequence is the maximum value of the data type. The default for a descending sequence is -1. 🔥
• start — The optional clause START WITH start allows the sequence to begin anywhere. The default starting value is minvalue for ascending sequences and maxvalue for descending ones. start wherever, bestie. ✨
• cache — The optional clause CACHE cache specifies how many sequence numbers are to be preallocated and stored in memory for faster access. The minimum value is 1 (only one value can be generated at a time, i.e., no cache), and this is also the default. speed-friendly, but read the notes below before you get too excited. 💀
• CYCLE and NO CYCLE — The CYCLE option allows the sequence to wrap around when the maxvalue or minvalue has been reached by an ascending or descending sequence respectively. If the limit is reached, the next number generated will be the minvalue or maxvalue, respectively. If NO CYCLE is specified, any calls to nextval after the sequence has reached its maximum value will return an error. If neither CYCLE or NO CYCLE are specified, NO CYCLE is the default. no surprise loops unless you asked for the loop. 🌀
• OWNED BY table_name.column_name and OWNED BY NONE — The OWNED BY option causes the sequence to be associated with a specific table column, such that if that column (or its whole table) is dropped, the sequence will be automatically dropped as well. The specified table must have the same owner and be in the same schema as the sequence. OWNED BY NONE, the default, specifies that there is no such association. attached or unbothered, your call. 🫶

🦋 NOTES 🦋

Use DROP SEQUENCE to remove a sequence. simple as that. 💅

Sequences are based on bigint arithmetic, so the range cannot exceed the range of an eight-byte integer (-9223372036854775808 to 9223372036854775807). numbers have limits, bestie, respect them. 🔥

Because nextval and setval calls are never rolled back, sequence objects cannot be used if “gapless” assignment of sequence numbers is needed. It is possible to build gapless assignment by using exclusive locking of a table containing a counter; but this solution is much more expensive than sequence objects, especially if many transactions need sequence numbers concurrently. so yeah, if you need literally zero holes, this is not the no-cap shortcut. 😭

Unexpected results might be obtained if a cache setting greater than one is used for a sequence object that will be used concurrently by multiple sessions. Each session will allocate and cache successive sequence values during one access to the sequence object and increase the sequence object's last_value accordingly. Then, the next cache-1 uses of nextval within that session simply return the preallocated values without touching the sequence object. So, any numbers allocated but not used within a session will be lost when that session ends, resulting in “holes” in the sequence. holes in the sequence? unfortunately yes, that’s the tea. 💀

Furthermore, although multiple sessions are guaranteed to allocate distinct sequence values, the values might be generated out of sequence when all the sessions are considered. For example, with a cache setting of 10, session A might reserve values 1..10 and return nextval=1, then session B might reserve values 11..20 and return nextval=11 before session A has generated nextval=2. Thus, with a cache setting of one it is safe to assume that nextval values are generated sequentially; with a cache setting greater than one you should only assume that the nextval values are all distinct, not that they are generated purely sequentially. Also, last_value will reflect the latest value reserved by any session, whether or not it has yet been returned by nextval. it’s giving “distinct, not necessarily orderly,” and that distinction matters. 🦋

Another consideration is that a setval executed on such a sequence will not be noticed by other sessions until they have used up any preallocated values they have cached. so yeah, cached values are lowkey doing their own thing until they’re done. 🎀

🌈 EXAMPLES 🌈

Create an ascending sequence called serial, starting at 101:

CREATE SEQUENCE serial START 101;

Select the next number from this sequence:

SELECT nextval('serial');

 nextval
---------
     101

Select the next number from this sequence:

SELECT nextval('serial');

 nextval
---------
     102

Use this sequence in an INSERT command:

INSERT INTO distributors VALUES (nextval('serial'), 'nothing');

Update the sequence value after a COPY FROM:

BEGIN;
COPY distributors FROM 'input_file';
SELECT setval('serial', max(id)) FROM distributors;
END;

💅 COMPATIBILITY 💅

CREATE SEQUENCE conforms to the SQL standard, with the following exceptions:

• Obtaining the next value is done using the nextval() function instead of the standard's NEXT VALUE FOR expression. 📌
• The OWNED BY clause is a PostgreSQL extension. ✨

👑 SEE ALSO 👑

• ALTER SEQUENCE (ALTER_SEQUENCE(7))
• DROP SEQUENCE (DROP_SEQUENCE(7))

okay that’s the whole page, bestie — source/version: PostgreSQL 14.24, date: 2026. mwah, go create some sequences responsibly 💜🎀