PPM(5)

๐Ÿ’– PPM โ€” the Netpbm color image format ๐Ÿ’–

okay bestie, welcome to the manual page for PPM Format Specification, section 5 of the File Formats Manual ๐Ÿซถ this is the whole lore of the PPM format and I'm gonna walk you through it like we're texting at 2am, no cap.


โœจ NAME โœจ

PPM โ€” the Netpbm color image format ๐Ÿ’…


๐ŸŒˆ DESCRIPTION ๐ŸŒˆ

okay so first things first: this is part of Netpbm(1). ๐Ÿงš

The PPM format is a lowest common denominator color image file format. Like, it's the plain cheese pizza of image formats, and honestly? that's the whole point of it.

And now the tea: this format is egregiously inefficient. ๐Ÿ’€ It's highly redundant, and it's carrying around a whole bunch of information that the human eye can't even discern. On top of that, the format allows very little information about the image besides basic color, which means you might have to couple a file in this format with other independent information just to get any decent use out of it. But โ€” and this is the iconic part โ€” it is very easy to write and analyze programs to process this format, and that is the point. โœจ

Also worth knowing: files often conform to this format in every single respect except the precise semantics of the sample values. These files are useful because of the way PPM is used as an intermediary format. People informally call them PPM files, but to be absolutely precise you should indicate the variation from true PPM. For example:

"PPM using the red, green, and blue colors that the scanner in question uses."

The name "PPM" is an acronym derived from "Portable Pixel Map." Images in this format (or a precursor of it) were once also called "portable pixmaps." cute right? ๐ŸŒธ


๐ŸŽ€ THE FORMAT ๐ŸŽ€

here's the actual format definition, bestie. You can use the libnetpbm(1) C subroutine library to read and interpret the format conveniently and accurately. ๐Ÿง 

A PPM file consists of a sequence of one or more PPM images. There are no data, delimiters, or padding before, after, or between images.

Each PPM image consists of the following:

  • A "magic number" for identifying the file type. A ppm image's magic number is the two characters "P6". ๐Ÿ”ฎ
  • Whitespace (blanks, TABs, CRs, LFs).
  • A width, formatted as ASCII characters in decimal.
  • Whitespace.
  • A height, again in ASCII decimal.
  • Whitespace.
  • The maximum color value (Maxval), again in ASCII decimal. Must be less than 65536 and more than zero. โš ๏ธ
  • A single whitespace character (usually a newline).
  • A raster of Height rows, in order from top to bottom. Each row consists of Width pixels, in order from left to right. Each pixel is a triplet of red, green, and blue samples, in that order. Each sample is represented in pure binary by either 1 or 2 bytes. If the Maxval is less than 256, it is 1 byte. Otherwise, it is 2 bytes. The most significant byte is first.

A row of an image is horizontal. A column is vertical. The pixels in the image are square and contiguous. ๐Ÿ“

In the raster, the sample values are "nonlinear." They are proportional to the intensity of the ITU-R Recommendation BT.709 red, green, and blue in the pixel, adjusted by the BT.709 gamma transfer function. (That transfer function specifies a gamma number of 2.2 and has a linear section for small intensities). A value of Maxval for all three samples represents CIE D65 white and the most intense color in the color universe of which the image is part (the color universe is all the colors in all images to which this image might be compared).

BT.709's range of channel values (16-240) is irrelevant to PPM. ๐Ÿ™ˆ

ITU-R Recommendation BT.709 is a renaming of the former CCIR Recommendation 709. When CCIR was absorbed into its parent organization, the ITU, ca. 2000, the standard was renamed. This document once referred to the standard as CIE Rec. 709, but it isn't clear now that CIE ever sponsored such a standard. history lesson, you're welcome ๐Ÿ“š

Note that another popular color space is the newer sRGB. A common variation from PPM is to substitute this color space for the one specified. You can use pnmgamma to convert between this variation and true PPM.

Note that a common variation from the PPM format is to have the sample values be "linear," i.e. as specified above except without the gamma adjustment. pnmgamma takes such a PPM variant as input and produces a true PPM as output.

Strings starting with "#" may be comments, the same as with PBM(1). ๐Ÿ’ฌ

Note that you can use pamdepth to convert between the format with 1 byte per sample and the one with 2 bytes per sample.

All characters referred to herein are encoded in ASCII. "newline" refers to the character known in ASCII as Line Feed or LF. A "white space" character is space, CR, LF, TAB, VT, or FF (I.e. what the ANSI standard C isspace() function calls white space). โœจ

๐ŸŒŸ Minimal Subset ๐ŸŒŸ

The PPM format is so simple that many programmers write programs to process it directly, without using a library such as libnetpbm โ€” reverse engineering a subset of the format from examples rather than using the specification. So if you want to produce an image that as many programs as possible can read, you should stick to the following subset. ๐Ÿ‘‘

The image consists of the following bytes:

  • 'P6' followed by newline
  • width and height separated by a space (e.g. '50 100'), followed by newline
  • maxval, followed by newline. At most 255; even more minimally, 255 exactly.
  • The raster

There is only one image in the file.

The program pnmtopnm produces this minimal subset, so if you have a more complex PGM image, you can pass it to a less tolerant program through pnmtopnm. pamdepth can make the maxval 255. ๐Ÿ’…

๐Ÿฆ‹ Plain PPM ๐Ÿฆ‹

There is actually another version of the PPM format that is fairly rare: "plain" PPM format. The format above, which is generally considered the normal one, is known as the "raw" PPM format. See pbm (1) for some commentary on how plain and raw formats relate to one another and how to use them.

The difference in the plain format is:

  • There is exactly one image in a file.
  • The magic number is P3 instead of P6.
  • Each sample in the raster is represented as an ASCII decimal number (of arbitrary size).
  • Each sample in the raster has white space before and after it. There must be at least one character of white space between any two samples, but there is no maximum. There is no particular separation of one pixel from another โ€” just the required separation between the blue sample of one pixel from the red sample of the next pixel.
  • No line should be longer than 70 characters.

Here is an example of a small image in this format.

P3
# feep.ppm
4 4
15
 0  0  0    0  0  0    0  0  0   15  0 15
 0  0  0    0 15  7    0  0  0    0  0  0
 0  0  0    0  0  0    0 15  7    0  0  0
15  0 15    0  0  0    0  0  0    0  0  0

There is a newline character at the end of each of these lines.

Programs that read this format should be as lenient as possible, accepting anything that looks remotely like a PPM image. ๐Ÿซถ


๐ŸŒ INTERNET MEDIA TYPE ๐ŸŒ

No Internet Media Type (aka MIME type, content type) for PPM has been registered with IANA, but the value image/x-portable-pixmap is conventional. ๐Ÿ“ฎ

Note that the PNM Internet Media Type image/x-portable-anymap also applies.


๐Ÿ“ FILE NAME ๐Ÿ“

There are no requirements on the name of a PPM file, but the convention is to use the suffix ".ppm". "pnm" is also conventional, for cases where distinguishing between the particular subformats of PNM is not convenient. โœจ


๐Ÿ•ฐ๏ธ COMPATIBILITY ๐Ÿ•ฐ๏ธ

Before April 2000, a raw format PPM file could not have a maxval greater than 255. Hence, it could not have more than one byte per sample. Old programs may depend on this. ๐Ÿ˜ญ

Before July 2000, there could be at most one image in a PPM file. As a result, most tools to process PPM files ignore (and don't read) any data after the first image. ๐Ÿ’€


๐Ÿ‘€ SEE ALSO ๐Ÿ‘€

pnm(1), pgm(1), pbm(1), pam(1), programs that process PPM(1)


๐Ÿ“œ DOCUMENT SOURCE ๐Ÿ“œ

This manual page was generated by the Netpbm tool 'makeman' from HTML source. The master documentation is at

http://netpbm.sourceforge.net/doc/ppm.html

and that's the whole page bestie, you ate it ๐Ÿ’…โœจ this was netpbm documentation, 07 November 2025 edition, serving PPM Format Specification(5) realness โ€” go forth and pixel, mwah ๐ŸŽ€๐Ÿฆ‹๐Ÿ’–

๐Ÿ“ฆ where this page comes from