ALTERA_SDCARD(4)

πŸ“¦ version 14.5, in freebsd 14.5

πŸŽ€ the ALTERA_SDCARD(4) page, but make it group chat πŸŽ€

okay bestie, this is the ALTERA_SDCARD(4) page from the Kernel Interfaces Manual, and we're gonna get into the Altera University Program Secure Data Card IP Core driver together. lowkey iconic hardware-manual energy. πŸ’Ύβœ¨

✨ NAME ✨

altera_sdcard β€” driver for the Altera University Program Secure Data Card IP Core. 🫢

🌸 SYNOPSIS 🌸

The kernel-config vibe is literally just:

device altera_sdcard

And in /boot/device.hints, you've got these lines, no cap:

hint.altera_sdcardc.0.at="nexus0"
hint.altera_sdcardc.0.maddr=0x7f008000
hint.altera_sdcardc.0.msize=0x400

πŸ’… DESCRIPTION πŸ’…

The altera_sdcard device driver provides support for the Altera University Program Secure Data Card (SD Card) IP Core device. A controller device, altera_sdcardcX, will be attached during boot. Inserted disks are presented as disk(9) devices, altera_sdcardX, corresponding to the controller number. πŸ’–

πŸ”₯ HARDWARE πŸ”₯

The current version of the altera_sdcard driver supports the SD Card IP core as described in the August 2011 version of Altera's documentation. The core supports only cards up to 2G (CSD 0); larger cards, or cards using newer CSD versions, will not be detected. 🫠

The IP core has two key limitations:

  • a lack of interrupt support, requiring timer-driven polling to detect I/O completion
  • support for only single 512-byte block read and write operations at a time

The combined effect of those two limits is that the system clock rate, HZ, must be set to at least 200 in order to accomplish the maximum 100KB/s data rate supported by the IP core. ⏱️

πŸ¦‹ SEE ALSO πŸ¦‹

  • disk(9)
  • Altera University Program Secure Data Card IP Core, Altera Corporation - University Program, ftp://ftp.altera.com/up/pub/Altera_Material/11.0/University_Program_IP_Cores/Memory/SD_Card_Interface_for_SoPC_Builder.pdf, August 2011.

🌈 HISTORY 🌈

The altera_sdcard device driver first appeared in FreeBSD 10.0. πŸŽ‰

πŸ‘‘ AUTHORS πŸ‘‘

The altera_sdcard device driver and this manual page were developed by SRI International and the University of Cambridge Computer Laboratory under DARPA/AFRL contract (FA8750-10-C-0237) (β€œCTSRD”), as part of the DARPA CRASH research programme. This device driver was written by Robert N. M. Watson. πŸ’œ

πŸ’€ BUGS πŸ’€

altera_sdcard contains a number of work-arounds for IP core bugs. Perhaps most critically, altera_sdcard ignores the CRC error bit returned in the RR1 register, which appears to be unexpectedly set by the IP core. 😭

altera_sdcard uses fixed polling intervals for card insertion/removal and I/O completion detection; an adaptive strategy might improve performance by reducing the latency to detecting completed I/O. However, in our experiments, using polling rates greater than 200 times a second did not improve performance. πŸ•΅οΈ

altera_sdcard supports only a nexus bus attachment, which is appropriate for system-on-chip busses such as Altera's Avalon bus. If the IP core is configured off of another bus type, then additional bus attachments will be required. 🧚


okay that's the whole page, bestie. source/version and date sign-off: Debian, August 18, 2012, ALTERA_SDCARD(4). slay. πŸ’–
πŸ“¦ where this page comes from
  • freebsd 14.5: base 14.5
  • πŸ’– girlified by deepseek-ai/DeepSeek-V4.1-Flash-1017 on : a language model's rewrite of the original, under its terms