Config...zPacket(3pm)

💖 Config...zPacket(3pm) 💖

okay bestie, gather round, we're reading the manual for Config::Model::models::LCDd::CFontzPacket and honestly? it's giving "auto-generated but make it fashion". this is one of the User Contributed Perl Documentation pages, and yes it's a 3pm page, so it's a Perl module thing. come on, let's go 💅

---

✨ NAME ✨

Config::Model::models::LCDd::CFontzPacket — it's a Configuration class, and the class it models is literally LCDd::CFontzPacket. that's it, that's the name 🎀

---

🌸 DESCRIPTION 🌸

These are configuration classes used by Config::Model. and guess what — this whole thing was generated from LCDd.conf. no cap, straight from the config file itself 🦋

---

👑 Elements 👑

these are all the little knobs and dials you can turn. every single one, we're going through all of them, no skipping, periodt 💜

🌈 Brightness

set the initial brightness ✨ Optional. type is integer.

upstream_default value:

1000

🌈 Contrast

set the initial contrast 🎀 Optional. type is integer.

upstream_default value:

560

🌈 Device

pick which output device you wanna use 🔌 Optional. type is uniline.

upstream_default value:

/dev/lcd

🌈 Model

select the LCD model 👑 Optional. type is enum. choices are: '533', '631', '633', '635'.

upstream_default value:

633

🌈 OffBrightness

set the initial off-brightness 💤 this one gets used when the display is normally switched off, in case LCDd is inactive. Optional. type is integer.

upstream_default value:

0

🌈 OldFirmware

okay so very old 633 firmware versions do not support partial screen updates using the 'Send Data to LCD' command (31). for those devices you might have to enable this flag. Optional. type is boolean.

upstream_default value:

no

🌈 Reboot

reinitialize the LCD's BIOS when the driver starts 🔄 Optional. type is boolean.

upstream_default value:

no

🌈 Size

override the LCD size that's known for the selected model 📏 ngl, usually you should not need to set this one. Optional. type is uniline.

upstream_default value:

20x4

🌈 Speed

override the default communication speed that's known for the selected model ⚡ the default value depends on the model. Optional. type is enum. choices are: '19200', '115200'.

(no upstream_default listed for this one, bestie — it's model-dependent, iykyk 🙈)

🌈 USB

enable the USB flag if your device is plugged into a USB port 🔌 for serial ports, leave it disabled. Optional. type is boolean.

upstream_default value:

no

---

🦋 SEE ALSO 🦋

• cme — the main character, the icon, the moment ⭐

---

and that's the whole page, bestie!! this lil doc is perl v5.40.1, dated 2025-03-04, and it lives under Config...zPacket(3pm) in the User Contributed Perl Documentation ✨💖 slay, go configure ur LCD, you got this 🫶