SHELL(3)

📦 version 93vu, in opensuse-leap 16.0

🌸 NAME 🌸

okay so shell(3) is a ksh library interface — that’s the whole vibe, bestie 💖

🎀 SYNOPSIS 🎀

📦 HEADERS/LIBRARIES

#include        <shell.h>
libshell.a      -lshell

🧬 DATA TYPES

Shell_t;
Shopt_t;
Shscope_t;
Shbltin_t;
Shbltin_f;
Shinit_f;
Shwait_f;

🛠️ FUNCTIONS

int     sh_main(int argc, char *argv[], Sh_init fn);
Shell_t *sh_init(int argc, char *argv[]);
Shell_t *sh_getinterp(void);

Namval_t        *sh_addbuiltin(const char *name,Sh_bltin_f fn,void *arg);

unsigned int    sh_isoption(int option);
unsigned int    sh_onoption(int option);
unsigned int    sh_offoption(int option);

void    *sh_parse(Shell_t *shp, Sfio_t *sp, int flags);
int     sh_trap(const char *string, int mode);
int     sh_run(int argc, char *argv[]);
int     sh_eval(Sfio_t *sp,int mode);
int     sh_fun(Namval_t *funnode, Namval_t *varnode, char *argv[]);
int     sh_funscope(int argc,char *argv[],int(*fn)(void*),void *arg,int flags);
Shscope_t       *sh_getscope(int index,int whence);
Shscope_t       *sh_setscope(Shscope_t *scope);

int     (*sh_fdnotify(int(*fn)(int,int)))(int,int);
char    *sh_fmtq(const char *string);
void    *sh_waitnotify(Shwait_f fn);
void    sh_delay(double sec);
Sfio_t  *sh_iogetiop(int  fd, int mode);
int     sh_sigcheck(void);

✨ DESCRIPTION ✨

The Shell library is a set of functions used for writing extensions to ksh or writing commands that embed shell command processing. The include file <shell.h> contains the type definitions, function prototypes, and symbolic constants defined by this interface. It also defines replacement definitions for the standard library functions access(), close(), dup(), exit(), fcntl(), lseek(), open(), pipe(), read(), and write() that must be used with all code intended to be compiled as built-in commands. no cap, that part matters 💅

The <shell.h> header includes <ast.h> which in turn includes the standard include files, <stddef.h>, <stdlib.h>, <stdarg.h>, <limits.h>, <stdio.h>, <string.h>, <unistd.h>, <sys/types.h>, <fcntl.h>, and <locale.h>. The <shell.h> header also includes the headers <cdt.h>, <cmd.h>, <sfio.h>, <nval.h>, <stk.h>, and <error.h> so that in most cases, programs only require the single header <shell.h>. it’s giving “one header to rule them all” 🫶

🧚 ways to use this library

Programs can use this library in one of the following ways:

  1. To write builtin commands and/or other code that will be loaded into the shell by loading dynamic libraries at run time using the builtin(1) command. In this case the shell will look for a function named lib_init in your library and, if found, will execute this function with two arguments. The first argument will be an int with value 0 when the library is loaded. The second argument will contain a pointer to a structure of type Shbltin_t. In addition, for each argument named on the builtin command line, it will look for a function named b_name() in your library and will name as a built-in.
  2. To build a separate command that uses the shell as a library at compile or run time. In this case the sh_init() function must be called to initialize this library before any other commands in this library are invoked. The arguments argc and argv are the number of arguments and the vector of arguments as supplied by the shell. It returns a pointer to the Shell_t.
  3. To build a new version of ksh with extended capabilities, for example tksh(1). In this case, the user writes a main() function that calls sh_main() with the argc and argv arguments from main and pointer to function, fn as a third argument. The function fn will be invoked with argument 0 after ksh has done initialization, but before ksh has processed any start up files or executed any commands. The function fn will be invoked with an argument of 1 before ksh begins to execute a script that has been invoked by name since ksh cleans up memory and long jumps back to the beginning of the shell in this case. The function fn will be called with argument -1 before the shell exits.

🏗️ Shell_t fields

The Shell_t structure contains the following fields:

Shopt_t options;                /* set -o options */
Dt_t    *var_tree;              /* shell variable dictionary */
Dt_t    *fun_tree;              /* shell function dictionary */
Dt_t    *alias_tree;            /* shell alias dictionary */
Dt_t    *bltin_tree;            /* shell built-in dictionary */
Shscope_t       *topscope;              /* pointer to top-level scope */
char    *infile_name;   /* path name of current input file*/
int     inlineno;               /* line number of current input file*/
int     exitval;                /* most recent exit value*/

This structure is returned by sh_init() but can also be retrieved by a call to sh_getinterp().

🧱 built-ins and Shbltin_t

All built-in commands to the shell are invoked with three arguments. The first two arguments give the number of arguments and the argument list and uses the same conventions as the main() function of a program. The third argument is a pointer to a structure of type Shbltin_t. This structure contains shp which is a pointer to the shell interpreter, and ptr which is a pointer that can be associated with each built-in.

The sh_addbuiltin() function is used to add, replace or delete built-in commands. It takes the name of the built-in, name, a pointer to the function that implements the built-in, fn, and a pointer that will be passed to the function in the ptr field when it is invoked. If fn is non-NULL the built-in command is added or replaced. Otherwise, sh_addbuiltin() will return a pointer to the built-in if it exists or NULL otherwise. If arg is (void*)1 the built-in will be deleted. The name argument can be in the format of a pathname. It cannot be the name of any of the special built-in commands. If name contains a /, the built-in is the basename of the pathname and the built-in will only be executed if the given pathname is encountered when performing a path search. When adding or replacing a built-in, sh_addbuiltin() function returns a pointer to the name-value pair corresponding to the built-in on success and NULL if it is unable to add or replace the built-in. When deleting a built-in, NULL is returned on success or if not found, and the name-value pair pointer is returned if the built-in cannot be deleted.

🎚️ shell option constants

The functions sh_onoption(), sh_offoption(), sh_isoption() are used to set, unset, and test for shell options respectively. The option argument can be any one of the following:

  • SH_ALLEXPORT — The NV_EXPORT attribute is given to each variable whose name is an identifier when a value is assigned.
  • SH_BGNICE — Each background process is run at a lower priority.
  • SH_ERREXIT — Causes a non-interactive shell to exit when a command, other than a conditional command, returns non-zero.
  • SH_EMACS — The emacs editing mode.
  • SH_GMACS — Same as the emacs editing mode except for the behavior of CONTROL-T.
  • SH_HISTORY — Indicates that the history file has been created and that commands can be logged.
  • SH_IGNOREEOF — Do not treat end-of-file as exit.
  • SH_INTERACTIVE — Set for interactive shells. Do not set or unset this option. 🚨
  • SH_MARKDIRS — A / is added to the end of each directory generated by pathname expansion.
  • SH_MONITOR — Indicates that the monitor option is enabled for job control.
  • SH_NOCLOBBER — The > redirection will fail if the file exists. Each file created with > will have the O_EXCL bit set as described in <fcntl.h>.
  • SH_NOGLOB — Do not perform pathname expansion.
  • SH_NOLOG — Do not save function definitions in the history file.
  • SH_NOTIFY — Cause a message to be generated as soon as each background job completes.
  • SH_NOUNSET — Cause the shell to fail with an error when an unset variable is referenced.
  • SH_PRIVILEGED — listed with no extra description in the source; it just vibes here.
  • SH_VERBOSE — Cause each line to be echoed as it is read by the parser.
  • SH_XTRACE — Cause each command to be displayed after all expansions, but before execution.
  • SH_VI — The vi edit mode.
  • SH_VIRAW — Read character at a time rather than line at a time when in vi edit mode.

🪄 sh_trap()

The sh_trap() function can be used to compile and execute a string or file. A value of 0 for mode indicates that name refers to a string. A value of 1 for mode indicates that name is an Sfio_t* to an open stream. A value of 2 for mode indicates that name points to a parse tree that has been returned by sh_parse(). The complete file associated with the string or file is compiled and then executed so that aliases defined within the string or file will not take effect until the next command is executed.

🏃 sh_run()

The sh_run() function will run the command given by the argument list argv containing argc elements. If argv[0] does not contain a /, it will be checked to see if it is a built-in or function before performing a path search.

📝 sh_eval()

The sh_eval() function executes a string or file stream sp. If mode is non-zero and the history file has been created, the stream defined by sp will be appended to the history file as a command.

🧩 sh_parse()

The sh_parse() function takes a pointer to the shell interpreter shp, a pointer to a string or file stream sp, and compilation flags, and returns a pointer to a parse tree of the compiled stream. This pointer can be used in subsequent calls to sh_trap(). The compilation flags can be zero or more of the following:

  • SH_NL — Treat new-lines as ;.
  • SH_EOF — An end of file causes syntax error. By default it will be treated as a new-line.

🪞 scopes and Shscope_t

ksh executes each function defined with the function reserved word in a separate scope. The Shscope_t type provides an interface to some of the information that is available on each scope. The structure contains the following public members:

Sh_scope_t      *par_scope;
int             argc;
char            **argv;
char            *cmdname;
Dt_t             *var_tree;

The sh_getscope() function can be used to get the scope information associated with an existing scope. Scopes are numbered from 0 for the global scope up to the current scope level. The whence argument uses the symbolic constants associated with lseek() to indicate whether the Iscope argument is absolute, relative to the current scope, or relative to the topmost scope. The sh_setscope() function can be used to make a known scope the current scope. It returns a pointer to the old current scope.

sh_funscope() is your literal new-scope button 🫧 — it runs a function in a fresh scope. The arguments argc and argv are the number of arguments and the list of arguments, respectively. If fn is non-NULL, then fn is invoked with argc, argv, and arg as arguments. 💅

sh_fun() is the one you call inside a discipline function or a built-in extension when you need to execute a discipline function script. funnode is a pointer to the shell function or built-in to execute. varnode is a pointer to the name value pair that has defined this discipline. The array argv is a NULL-terminated list of arguments that are passed to the function. 🎀

Signal tea ☕: by default, ksh only records but does not act on signals when running a built-in command. If a built-in takes a substantial amount of time to execute, then it should check for interrupts periodically by calling sh_sigcheck(). If a signal is pending, sh_sigcheck() will exit the function you are calling and return to the point where the most recent built-in was invoked, or where sh_eval() or sh_trap() was called. 😭

sh_delay() makes the shell sleep for a period of time defined by sec. 🛌

sh_fmtq() can be used to convert a string into a string that is quoted so that it can be reinput to the shell. Heads up: the quoted string returned by sh_fmtq may be returned on the current stack, so it must be saved or copied. 🧠

sh_fdnotify() causes the function fn to be called whenever the shell duplicates or closes a file. It is provided for extensions that need to keep track of file descriptors that could be changed by shell commands. The function fn is called with two arguments. The first argument is the original file descriptor. The second argument is the new file descriptor for duplicating files, and SH_FDCLOSE when a file has been closed. The previously installed sh_fdnotify() function pointer is returned. 🧵

sh_waitnotify() causes the function fn to be called whenever the shell is waiting for input from a slow device or waiting for a process to complete. This function can process events and run shell commands until there is input, the timer is reached, or a signal arises. It is called with three arguments. The first is the file descriptor from which the shell is trying to read, or -1 if the shell is waiting for a process to complete. The second is a timeout in milliseconds. A value of -1 for the timeout means that no timeout should be set. The third argument is 0 for input file descriptors and 1 for output file descriptor. The function needs to return a value >0 if there is input on the file descriptor, and a value <0 if the timeout is reached or a signal has occurred. A value of 0 indicates that the function has returned without processing and that the shell should wait for input or process completion. The previously installed sh_waitnotify() function pointer is returned. ⏳

sh_iogetiop() returns a pointer to the Sfio stream corresponding to file descriptor number fd and the given mode mode. The mode can be either SF_READ or SF_WRITE. The fd argument can be the number of an open file descriptor or one of the following symbolic constants:

  • SH_IOCOPROCESS — the stream corresponding to the most recent co-process. 👯
  • SH_IOHISTFILE — the stream corresponding to the history file. If no stream exists corresponding to fd or the stream can not be accessed in the specified mode, NULL is returned. 📜

🌈 SEE ALSO 🌈

💌 AUTHOR 💌

David G. Korn (dgk@research.att.com). 🫶

That’s the whole page, bestie — source/version: AST, date: 28 Feb 2003, and the page is SHELL(3). Byeee 💖🎀✨

📦 where this page comes from