Tcl_GetEncoding(3)

💖 Tcl_GetEncoding(3) — Tcl Library Procedures 💖

Okay bestie, buckle up: this is the Tcl encoding page, and it is long. The whole vibe is procedures for creating and using encodings, and the full main-character lineup is: Tcl_GetEncoding, Tcl_FreeEncoding, Tcl_GetEncodingFromObj, Tcl_ExternalToUtfDString, Tcl_ExternalToUtf, Tcl_UtfToExternalDString, Tcl_UtfToExternal, Tcl_WinTCharToUtf, Tcl_WinUtfToTChar, Tcl_GetEncodingName, Tcl_SetSystemEncoding, Tcl_GetEncodingNameFromEnvironment, Tcl_GetEncodingNames, Tcl_CreateEncoding, Tcl_GetEncodingSearchPath, Tcl_SetEncodingSearchPath, Tcl_GetDefaultEncodingDir, and Tcl_SetDefaultEncodingDir. Slay. ✨

✨ NAME ✨

Tcl_GetEncoding, Tcl_FreeEncoding, Tcl_GetEncodingFromObj, Tcl_ExternalToUtfDString, Tcl_ExternalToUtf, Tcl_UtfToExternalDString, Tcl_UtfToExternal, Tcl_WinTCharToUtf, Tcl_WinUtfToTChar, Tcl_GetEncodingName, Tcl_SetSystemEncoding, Tcl_GetEncodingNameFromEnvironment, Tcl_GetEncodingNames, Tcl_CreateEncoding, Tcl_GetEncodingSearchPath, Tcl_SetEncodingSearchPath, Tcl_GetDefaultEncodingDir, Tcl_SetDefaultEncodingDir — procedures for creating and using encodings. Periodt. 💅

🌈 SYNOPSIS 🌈

Bestie, here is the exact spellbook. Copy these signatures character for character, no cap:

#include <tcl.h>

Tcl_Encoding
Tcl_GetEncoding(interp, name)

void
Tcl_FreeEncoding(encoding)

int
Tcl_GetEncodingFromObj(interp, objPtr, encodingPtr)

char *
Tcl_ExternalToUtfDString(encoding, src, srcLen, dstPtr)

char *
Tcl_UtfToExternalDString(encoding, src, srcLen, dstPtr)

int
Tcl_ExternalToUtf(interp, encoding, src, srcLen, flags, statePtr,
                  dst, dstLen, srcReadPtr, dstWrotePtr, dstCharsPtr)

int
Tcl_UtfToExternal(interp, encoding, src, srcLen, flags, statePtr,
                  dst, dstLen, srcReadPtr, dstWrotePtr, dstCharsPtr)

char *
Tcl_WinTCharToUtf(tsrc, srcLen, dstPtr)

TCHAR *
Tcl_WinUtfToTChar(src, srcLen, dstPtr)

const char *
Tcl_GetEncodingName(encoding)

int
Tcl_SetSystemEncoding(interp, name)

const char *
Tcl_GetEncodingNameFromEnvironment(bufPtr)

void
Tcl_GetEncodingNames(interp)

Tcl_Encoding
Tcl_CreateEncoding(typePtr)

Tcl_Obj *
Tcl_GetEncodingSearchPath()

int
Tcl_SetEncodingSearchPath(searchPath)

const char *
Tcl_GetDefaultEncodingDir(void)

void
Tcl_SetDefaultEncodingDir(path)

🎀 ARGUMENTS 🎀

Every single parameter, coming at you, zero skipped:

• Tcl_Interp *interp (in) — Interpreter to use for error reporting, or NULL if no error reporting is desired. Like, sometimes you just don't want the drama. 🙈
• const char *name (in) — Name of encoding to load. Gimme the name, bestie. 🏷️
• Tcl_Encoding encoding (in) — The encoding to query, free, or use for converting text. If encoding is NULL, the current system encoding is used. Ngl, that fallback is kinda iconic. ✨
• Tcl_Obj *objPtr (in) — Name of encoding to get token for. 💌
• Tcl_Encoding *encodingPtr (out) — Points to storage where encoding token is to be written. That's where the token goes, bestie. 🎟️
• const char *src (in) — For the Tcl_ExternalToUtf functions, an array of bytes in the specified encoding that are to be converted to UTF-8. For the Tcl_UtfToExternal and Tcl_WinUtfToTChar functions, an array of UTF-8 characters to be converted to the specified encoding. Same name, different direction — read the room. 👀
• const TCHAR *tsrc (in) — An array of Windows TCHAR characters to convert to UTF-8. Windows girlies, this one's for you. 🪟
• int srcLen (in) — Length of src or tsrc in bytes. If the length is negative, the encoding-specific length of the string is used. Negative length is giving "figure it out yourself" energy. 💀
• Tcl_DString *dstPtr (out) — Pointer to an uninitialized or free Tcl_DString in which the converted result will be stored. Uninitialized or free, okay? Don't come in with a whole situation. 🫶
• int flags (in) — Various flag bits OR-ed together. The details are about to get crunchy, but we're keeping every crumb:
  • TCL_ENCODING_START signifies that the source buffer is the first block in a (potentially multi-block) input stream, telling the conversion routine to reset to an initial state and perform any initialization that needs to occur before the first byte is converted. First block behavior, activated. 🚦
  • TCL_ENCODING_END signifies that the source buffer is the last block in a (potentially multi-block) input stream, telling the conversion routine to perform any finalization that needs to occur after the last byte is converted and then to reset to an initial state. Last block, wrap it up bestie. 🎬
  • TCL_ENCODING_STOPONERROR signifies that the conversion routine should return immediately upon reading a source character that does not exist in the target encoding; otherwise a default fallback character will automatically be substituted. So yeah — stop on error, or get the fallback character. Choose your fighter. ⚠️
• Tcl_EncodingState *statePtr (in/out) — Used when converting a (generally long or indefinite length) byte stream in a piece-by-piece fashion. The conversion routine stores its current state in *statePtr after src (the buffer containing the current piece) has been converted; that state information must be passed back when converting the next piece of the stream so the conversion routine knows what state it was in when it left off at the end of the last piece. May be NULL, in which case the value specified for flags is ignored and the source buffer is assumed to contain the complete string to convert. Piece-by-piece conversion is highkey a whole commitment, but the state remembers where it left off. 🧠💖
• char *dst (out) — Buffer in which the converted result will be stored. No more than dstLen bytes will be stored in dst. Respect the limit, bestie — no buffer overruns on main. 🚫
• int dstLen (in) — The maximum length of the output buffer dst in bytes. That's the ceiling, periodt. 📏
• int *srcReadPtr (out) — gets filled with how many bytes from src actually made it through the conversion ✨ Heads up: this can be less than the original source length if some source characters had a lil conversion problem 😭 Totally fine to pass NULL here.
• int *dstWrotePtr (out) — gets filled with how many bytes actually landed in the output buffer because of the conversion 💖 Can be NULL too, no pressure.
• int *dstCharsPtr (out) — gets filled with the number of characters that correspond to the number of bytes stored in the output buffer 🎀 NULL is allowed bestie.
• Tcl_DString *bufPtr (out) — storage where the prescribed system encoding name goes 🌸
• const Tcl_EncodingType *typePtr (in) — the struct that defines a whole new type of encoding 👑
• Tcl_Obj *searchPath (in) — a list of filesystem directories to go hunting in for encoding data files 🦋
• const char *path (in) — a path pointing at where the encoding file lives 📁

---

🌈 INTRODUCTION 🌈

Okay so these routines convert between Tcl's internal character representation, which is UTF-8, and the character representations that all the various operating systems and file systems out there use — think Unicode, ASCII, or Shift-JIS 💅 When you're operating on strings — like getting the names of files, or displaying characters using international fonts — those strings have to be translated into one or possibly multiple formats that the various system calls can actually use. No cap.

For instance, on a Japanese Unix workstation, a user might obtain a filename represented in the EUC-JP file encoding, and then translate the characters to the jisx0208 font encoding so the filename can be displayed in a Tk widget ✨ The whole purpose of the encoding package is to help bridge that translation gap 🫶 UTF-8 provides the intermediate staging ground for all the various encodings. In the example above, text would be translated into UTF-8 from whatever file encoding the operating system is using, and then it would be translated from UTF-8 into whatever font encoding the display routines require 💖 iykyk

Some basic encodings are compiled right into Tcl 🔥 Others can be defined by the user, or dynamically loaded from encoding files in a platform-independent manner. Iconic behaviour honestly.

---

💫 DESCRIPTION 💫

Tcl_GetEncoding finds an encoding given its name 🌸 That name may refer to a built-in Tcl encoding, a user-defined encoding registered by calling Tcl_CreateEncoding, or a dynamically-loadable encoding file. The return value is a token that represents the encoding, and you can use it in subsequent calls to procedures like Tcl_GetEncodingName, Tcl_FreeEncoding, and Tcl_UtfToExternal 👑 If the name didn't refer to any known or loadable encoding, NULL is returned and an error message is dropped in interp. Sad but true 😭

The encoding package maintains a database of all encodings currently in use 🎀 The first time name is seen, Tcl_GetEncoding returns an encoding with a reference count of 1. If the same name is requested further times, then the reference count for that encoding is incremented — without the overhead of allocating a new encoding and all its associated data structures 💅 slay, efficiency.

When an encoding is no longer needed, Tcl_FreeEncoding should be called to release it. When an encoding is no longer in use anywhere — meaning it has been freed as many times as it has been gotten — Tcl_FreeEncoding will release all storage the encoding was using and delete it from the database ✨ periodt.

Tcl_GetEncodingFromObj treats the string representation of objPtr as an encoding name, and finds an encoding with that name, just as Tcl_GetEncoding does 🌟 When an encoding is found, it is cached within the objPtr value for future reference, the Tcl_Encoding token is written to the storage pointed to by encodingPtr, and the value TCL_OK is returned. If no such encoding is found, the value TCL_ERROR is returned, and no writing to *encodingPtr takes place 🚫 Just as with Tcl_GetEncoding, the caller should call Tcl_FreeEncoding on the resulting encoding token when that token will no longer be used. Clean up after yourself bestie 💖

Tcl_ExternalToUtfDString converts a source buffer src from the specified encoding into UTF-8 🦋 The converted bytes are stored in dstPtr, which is then null-terminated. The caller should eventually call Tcl_DStringFree to free any information stored in dstPtr. When converting, if any of the characters in the source buffer cannot be represented in the target encoding, a default fallback character will be used 🌸 The return value is a pointer to the value stored in the DString.

Tcl_ExternalToUtf converts a source buffer src from the specified encoding into UTF-8 ✨ Up to srcLen bytes are converted from the source buffer and up to dstLen converted bytes are stored in dst. In all cases, *srcReadPtr is filled with the number of bytes that were successfully converted from src, and *dstWrotePtr is filled with the corresponding number of bytes that were stored in dst 💜 The return value is one of these:

• TCL_OK — all bytes of src were converted 🎉 ate.
• TCL_CONVERT_NOSPACE — the destination buffer was not large enough for all of the converted data; as many characters as could fit were converted though 😤
• TCL_CONVERT_MULTIBYTE — the last few bytes in the source buffer were the beginning of a multibyte sequence, but more bytes were needed to complete this sequence. A subsequent call to the conversion routine should pass a buffer containing the unconverted bytes that remained in src plus some further bytes from the source stream, to properly convert the formerly split-up multibyte sequence 🧩
• TCL_CONVERT_SYNTAX — the source buffer contained an invalid character sequence 💀 This may occur if the input stream has been damaged, or if the input encoding method was misidentified. rude.
• TCL_CONVERT_UNKNOWN — the source buffer contained a character that could not be represented in the target encoding and TCL_ENCODING_STOPONERROR was specified 🙈

Tcl_UtfToExternalDString converts a source buffer src from UTF-8 into the specified encoding 🌈 The converted bytes are stored in dstPtr, which is then terminated with the appropriate encoding-specific null. The caller should eventually call Tcl_DStringFree to free any information stored in dstPtr. When converting, if any of the characters in the source buffer cannot be represented in the target encoding, a default fallback character will be used 💖 The return value is a pointer to the value stored in the DString.

Tcl_UtfToExternal converts a source buffer src from UTF-8 into the specified encoding ✨ Up to srcLen bytes are converted from the source buffer and up to dstLen converted bytes are stored in dst. In all cases, *srcReadPtr is filled with the number of bytes that were successfully converted from src, and *dstWrotePtr is filled with the corresponding number of bytes that were stored in dst 🎀 The return values are the same as the return values for Tcl_ExternalToUtf — same list, same vibes, go look up there 👆

Tcl_WinUtfToTChar and Tcl_WinTCharToUtf are Windows-only convenience functions for converting between UTF-8 and Windows strings based on the TCHAR type, which is by convention a Unicode character on Windows NT 🪟 lowkey niche but iconic.

Tcl_GetEncodingName is roughly the inverse of Tcl_GetEncoding 🔄 Given an encoding, the return value is the name argument that was used to create the encoding. The string returned by Tcl_GetEncodingName is only guaranteed to persist until the encoding is deleted ⚠️ and the caller must not modify this string. hands off bestie 💅

Tcl_SetSystemEncoding sets the default encoding that should be used whenever the user passes a NULL value for the encoding argument to any of the other encoding functions 👑 If name is NULL, the system encoding is reset to the default system encoding, binary. If the name didn't refer to any known or loadable encoding, TCL_ERROR is returned and an error message is left in interp 😭 Otherwise, this procedure increments the reference count of the new system encoding, decrements the reference count of the old system encoding, and returns TCL_OK ✨ balanced, as all things should be.

Tcl_GetEncodingNameFromEnvironment provides a means for the Tcl library to report the encoding name it believes to be the correct one to use as the system encoding — based on system calls and examination of the environment, suitable for the platform 🦋 It accepts bufPtr, a pointer to an uninitialized or freed Tcl_DString, and writes the encoding name to it. The Tcl_DStringValue is returned 💖

Okay bestie, so Tcl_GetEncodingNames sets the interp result to a list consisting of the names of all the encodings that are currently defined or can be dynamically loaded, searching the encoding path specified by Tcl_SetDefaultEncodingDir. It does not ensure that the dynamically-loadable encoding files contain valid data, but merely that they exist. 💅✨

Next up: Tcl_CreateEncoding defines a new encoding and registers the C procedures that are called back to convert between the encoding and UTF-8. Encodings created by Tcl_CreateEncoding are thereafter visible in the database used by Tcl_GetEncoding. Just as with the Tcl_GetEncoding procedure, the return value is a token that represents the encoding and can be used in subsequent calls to other encoding functions. Tcl_CreateEncoding returns an encoding with a reference count of 1. 🎀

And if an encoding with the specified name already exists? Then its entry in the database is replaced with the new encoding; the token for the old encoding will remain valid and continue to behave as before, but users of the new token will now call the new encoding procedures. Iconic database glow-up behavior, no cap. 👑

The typePtr argument to Tcl_CreateEncoding contains information about the name of the encoding and the procedures that will be called to convert between this encoding and UTF-8. It is defined as follows:

typedef struct Tcl_EncodingType {
    const char *encodingName;
    Tcl_EncodingConvertProc *toUtfProc;
    Tcl_EncodingConvertProc *fromUtfProc;
    Tcl_EncodingFreeProc *freeProc;
    ClientData clientData;
    int nullSize;
} Tcl_EncodingType;

The encodingName provides a string name for the encoding, by which it can be referred in other procedures such as Tcl_GetEncoding. The toUtfProc refers to a callback procedure to invoke to convert text from this encoding into UTF-8. The fromUtfProc refers to a callback procedure to invoke to convert text from UTF-8 into this encoding. The freeProc refers to a callback procedure to invoke when this encoding is deleted. The freeProc field may be NULL. 🫶

The clientData contains an arbitrary one-word value passed to toUtfProc, fromUtfProc, and freeProc whenever they are called. Typically, this is a pointer to a data structure containing encoding-specific information that can be used by the callback procedures. For instance, two very similar encodings such as ascii and macRoman may use the same callback procedure, but use different values of clientData to control its behavior. The nullSize specifies the number of zero bytes that signify end-of-string in this encoding. It must be 1 (for single-byte or multi-byte encodings like ASCII or Shift-JIS) or 2 (for double-byte encodings like Unicode). Constant-sized encodings with 3 or more bytes per character (such as CNS11643) are not accepted. 🚫💀

The callback procedures toUtfProc and fromUtfProc should match the type Tcl_EncodingConvertProc:

typedef int Tcl_EncodingConvertProc(
        ClientData clientData,
        const char *src,
        int srcLen,
        int flags,
        Tcl_EncodingState *statePtr,
        char *dst,
        int dstLen,
        int *srcReadPtr,
        int *dstWrotePtr,
        int *dstCharsPtr);

The toUtfProc and fromUtfProc procedures are called by the Tcl_ExternalToUtf or Tcl_UtfToExternal family of functions to perform the actual conversion. The clientData parameter to these procedures is the same as the clientData field specified to Tcl_CreateEncoding when the encoding was created. The remaining arguments to the callback procedures are the same as the arguments, documented at the top, to Tcl_ExternalToUtf or Tcl_UtfToExternal, with the following exceptions. If the srcLen argument to one of those high-level functions is negative, the value passed to the callback procedure will be the appropriate encoding-specific string length of src. If any of the srcReadPtr, dstWrotePtr, or dstCharsPtr arguments to one of the high-level functions is NULL, the corresponding value passed to the callback procedure will be a non-NULL location. ✨

The callback procedure freeProc, if non-NULL, should match the type Tcl_EncodingFreeProc:

typedef void Tcl_EncodingFreeProc(
        ClientData clientData);

This freeProc function is called when the encoding is deleted. The clientData parameter is the same as the clientData field specified to Tcl_CreateEncoding when the encoding was created. 🌸

Tcl_GetEncodingSearchPath and Tcl_SetEncodingSearchPath are called to access and set the list of filesystem directories searched for encoding data files. 🦋

The value returned by Tcl_GetEncodingSearchPath is the value stored by the last successful call to Tcl_SetEncodingSearchPath. If no calls to Tcl_SetEncodingSearchPath have occurred, Tcl will compute an initial value based on the environment. There is one encoding search path for the entire process, shared by all threads in the process. Literally one path to rule them all, bestie. 💖

Tcl_SetEncodingSearchPath stores searchPath and returns TCL_OK, unless searchPath is not a valid Tcl list, which causes TCL_ERROR to be returned. The elements of searchPath are not verified as existing readable filesystem directories. When searching for encoding data files takes place, and non-existent or non-readable filesystem directories on the searchPath are silently ignored. 🙈

Tcl_GetDefaultEncodingDir and Tcl_SetDefaultEncodingDir are obsolete interfaces best replaced with calls to Tcl_GetEncodingSearchPath and Tcl_SetEncodingSearchPath. They are called to access and set the first element of the searchPath list. Since Tcl searches searchPath for encoding data files in list order, these routines establish the “default” directory in which to find encoding data files. 🎀⭐

💾 ENCODING FILES 💾

Okay bestie, so here's the tea: space would literally prohibit precompiling into Tcl every possible encoding algorithm (there are SO many), so a bunch of encodings are stored on disk as dynamically-loadable encoding files. And this whole arrangement also lets you create additional encoding files that can be loaded using the same mechanism. Iconic, honestly. These encoding files contain information about the tables and/or escape sequences used to map between an external encoding and Unicode. The external encoding may consist of single-byte, multi-byte, or double-byte characters.

Each dynamically-loadable encoding is represented as a text file. The initial line of the file, beginning with a “#” symbol, is a comment that provides a human-readable description of the file (yes, the first line is just vibe-setting commentary 💬). The next line identifies the type of encoding file. It can be one of the following letters:

1. S — A single-byte encoding, where one character is always one byte long in the encoding. An example is iso8859-1, used by many European languages. 🍓
2. D — A double-byte encoding, where one character is always two bytes long in the encoding. An example is big5, used for Chinese text.
3. M — A multi-byte encoding, where one character may be either one or two bytes long. Certain bytes are lead bytes, indicating that another byte must follow and that together the two bytes represent one character. Other bytes are not lead bytes and represent themselves. An example is shiftjis, used by many Japanese computers. 🌸
4. E — An escape-sequence encoding, specifying that certain sequences of bytes do not represent characters, but commands that describe how following bytes should be interpreted.

The rest of the lines in the file depend on the type.

Cases [1], [2], and [3] are collectively referred to as table-based encoding files. The lines in a table-based encoding file are in the same format as this example taken from the shiftjis encoding (this is not the complete file, bestie — it's just a taste):

# Encoding file: shiftjis, multi-byte
M
003F 0 40
00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0000000000000000000000000000000000000000000000000000000000000000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The third line of the file is three numbers. The first number is the fallback character (in base 16) to use when converting from UTF-8 to this encoding. The second number is a 1 if this file represents the encoding for a symbol font, or 0 otherwise. The last number (in base 10) is how many pages of data follow. So in the example: 003F 0 40 — fallback, not-a-symbol-font, 40 pages. Slay. 🔥

Subsequent lines in the example above are pages that describe how to map from the encoding into 2-byte Unicode. The first line in a page identifies the page number. Following it are 256 double-byte numbers, arranged as 16 rows of 16 numbers. Given a character in the encoding, the high byte of that character is used to select which page, and the low byte of that character is used as an index to select one of the double-byte numbers in that page — the value obtained being the corresponding Unicode character. By examination of the example above, one can see that the characters 0x7E and 0x8163 in shiftjis map to 203E and 2026 in Unicode, respectively. Math is mathing, iykyk. 🧮✨

Following the first page will be all the other pages, each in the same format as the first: one number identifying the page followed by 256 double-byte Unicode characters. If a character in the encoding maps to the Unicode character 0000, it means that the character does not actually exist. If all characters on a page would map to 0000, that page can be omitted (we love a shortcut, lowkey).

Case [4] is the escape-sequence encoding file. The lines in an this type of file are in the same format as this example taken from the iso2022-jp encoding:

# Encoding file: iso2022-jp, escape-driven
E
init           {}
final          {}
iso8859-1      \x1b(B
jis0201        \x1b(J
jis0208        \x1b$@
jis0208        \x1b$B
jis0212        \x1b$(D
gb2312         \x1b$A
ksc5601        \x1b$(C

In the file, the first column represents an option and the second column is the associated value. init is a string to emit or expect before the first character is converted, while final is a string to emit or expect after the last character. All other options are names of table-based encodings; the associated value is the escape-sequence that marks that encoding. Tcl syntax is used for the values; in the above example, for instance, “{}” represents the empty string and “\x1b” represents character 27. Cute little escape codes doing their thing 💅

When Tcl_GetEncoding encounters an encoding name that has not been loaded, it attempts to load an encoding file called name.enc from the encoding subdirectory of each directory that Tcl searches for its script library. If the encoding file exists, but is malformed, an error message will be left in interp. 👀 So like… malformed file = error message in interp, no cap.

---

🔑 KEYWORDS 🔑

utf, encoding, convert

---

That's the whole page, bestie — go forth and encode responsibly 🫶✨ This one's straight from the Tcl 8.1 manual, the Tcl_GetEncoding(3) page itself. Love that for us 💖🎀🦋