avr_interrupts(3)

📦 version 2.2.1, in fedora 43, fedora 44, opensuse-leap 16.0

💖 NAME 💖

avr_interrupts

This whole page is avr_interrupts(3) from avr-libc, bestie ✨

✨ SYNOPSIS ✨

💅 Global manipulation of the interrupt flag 💅

Okay so the global interrupt flag is chillin' in the I bit of the status register (SREG). 💅

Handling interrupts frequently requires attention regarding atomic access to objects that could be altered by code running within an interrupt context — peep <util/atomic.h> for that. 🫶

Frequently, interrupts are being disabled for periods of time in order to perform certain operations without being disturbed; see Problems with reordering code for things to be taken into account with respect to compiler optimizations. No cap.

#define sei()
#define cli()

🎀 Macros for writing interrupt handler functions 🎀

  • #define ISR(vector, attributes)
  • #define SIGNAL(vector)
  • #define EMPTY_INTERRUPT(vector)
  • #define ISR_ALIAS(vector, target_vector)
  • #define reti()
  • #define BADISR_vect

🌈 ISR attributes 🌈

  • #define ISR_BLOCK
  • #define ISR_NOBLOCK
  • #define ISR_NAKED
  • #define ISR_FLATTEN
  • #define ISR_NOICF
  • #define ISR_ALIASOF(target_vector)

🌸 Detailed Description 🌸

Note: This discussion of interrupts was originally taken from Rich Neswold's document. See Acknowledgments.

🦋 Introduction to avr-libc's interrupt handling 🦋

It's nearly impossible to find compilers that agree on how to handle interrupt code. Since the C language tries to stay away from machine dependent details, each compiler writer is forced to design their method of support. 💀

In the AVR-GCC environment, the vector table is predefined to point to interrupt routines with predetermined names. By using the appropriate name, your routine will be called when the corresponding interrupt occurs. The device library provides a set of default interrupt routines, which will get used if you don't define your own. Periodt.

Patching into the vector table is only one part of the problem. The compiler uses, by convention, a set of registers when it's normally executing compiler-generated code. It's important that these registers, as well as the status register, get saved and restored. The extra code needed to do this is enabled by tagging the interrupt function with __attribute__((signal)). 🔥

These details seem to make interrupt routines a little messy, but all these details are handled by the Interrupt API. An interrupt routine is defined with ISR(). This macro register and mark the routine as an interrupt handler for the specified peripheral. The following is an example definition of a handler for the ADC interrupt.

#include <avr/interrupt.h>

ISR(ADC_vect)
{
    // user code here
}

Refer to the chapter explaining assembler programming for an explanation about interrupt routines written solely in assembler language. 🧚

💜 Catch-all interrupt vector 💜

If an unexpected interrupt occurs (interrupt is enabled and no handler is installed, which usually indicates a bug), then the default action is to reset the device by jumping to the reset vector. You can override this by supplying a function named BADISR_vect which should be defined with ISR() as such. (The name BADISR_vect is actually an alias for __vector_default. The latter must be used inside assembly code in case <avr/interrupt.h> is not included.) 😭

#include <avr/interrupt.h>

ISR(BADISR_vect)
{
    // user code here
}

⭐ Nested interrupts ⭐

The AVR hardware clears the global interrupt flag in SREG before entering an interrupt vector. Thus, normally interrupts will remain disabled inside the handler until the handler exits, where the RETI instruction (that is emitted by the compiler as part of the normal function epilogue for an interrupt handler) will eventually re-enable further interrupts. For that reason, interrupt handlers normally do not nest. For most interrupt handlers, this is the desired behaviour, for some it is even required in order to prevent infinitely recursive interrupts (like UART interrupts, or level-triggered external interrupts). In rare circumstances though it might be desired to re-enable the global interrupt flag as early as possible in the interrupt handler, in order to not defer any other interrupt more than absolutely needed. This could be done using an sei() instruction right at the beginning of the interrupt handler, but this still leaves few instructions inside the compiler-generated function prologue to run with global interrupts disabled. The compiler can be instructed to insert an SEI instruction right at the beginning of an interrupt handler by declaring the handler the following way:

ISR(XXX_vect, ISR_NOBLOCK)
{
  ...
}

where XXX_vect is the name of a valid interrupt vector for the MCU type in question, as explained below. 👑

🍓 Two vectors sharing the same code 🍓

In some circumstances, the actions to be taken upon two different interrupts might be completely identical so a single implementation for the ISR would suffice. For example, pin-change interrupts arriving from two different ports could logically signal an event that is independent from the actual port (and thus interrupt vector) where it happened. Sharing interrupt vector code can be accomplished using the ISR_ALIASOF() attribute to the ISR macro:

ISR(PCINT0_vect)
{
  ...
  // Code to handle the event.
}

ISR(PCINT1_vect, ISR_ALIASOF(PCINT0_vect));
Note: There is no body to the aliased ISR.

Note that the ISR_ALIASOF() feature requires GCC 4.2 or above (or a patched version of GCC 4.1.x). See the documentation of the ISR_ALIAS() macro for an implementation which is less elegant but could be applied to all compiler versions. 💅

🎀 Empty interrupt service routines 🎀

In rare circumstances, an interrupt vector does not need any code to be implemented at all. The vector must be declared anyway, so when the interrupt triggers it won't execute the BADISR_vect code (which by default restarts the application). 🙈

This could for example be the case for interrupts that are solely enabled for the purpose of getting the controller out of sleep_mode().

A handler for such an interrupt vector can be declared using the EMPTY_INTERRUPT() macro:

EMPTY_INTERRUPT(ADC_vect);
Note: There is no body to this macro.

🧚 Manually defined ISRs 🧚

In some circumstances, the compiler-generated prologue and epilogue of the ISR might not be optimal for the job, and a manually defined ISR could be considered particularly to speedup the interrupt handling.

One solution to this could be to implement the entire ISR as manual assembly code in a separate (assembly) file. See Combining C and assembly source files for an example of how to implement it that way.

Another solution is to still implement the ISR in C language but take over the compiler's job of generating the prologue and epilogue. This can be done using the ISR_NAKED attribute to the ISR() macro. Note that the compiler does not generate anything as prologue or epilogue, so the final reti() must be provided by the actual implementation. SREG must be manually saved if the ISR code modifies it, and the compiler-implied assumption of __zero_reg__ always being 0 could be wrong (e. g. when interrupting right after of a MUL instruction). 💀

ISR(TIMER1_OVF_vect, ISR_NAKED)
{
  PORTB |= _BV(0);  // results in SBI which does not affect SREG
  reti();
}

🌈 Choosing the vector: Interrupt vector names 🌈

The interrupt is chosen by supplying one of the symbols in following table.

There are currently two different styles present for naming the vectors. One form uses names starting with SIG_, followed by a relatively verbose but arbitrarily chosen name describing the interrupt vector. This has been the only available style in avr-libc up to version 1.2.x.

Starting with avr-libc version 1.4.0, a second style of interrupt vector names has been added, where a short phrase for the vector description is followed by _vect. The short phrase matches the vector name as described in the datasheet of the respective device (and in Atmel's XML files), with spaces replaced by an underscore and other non-alphanumeric characters dropped. Using the suffix _vect is intented to improve portability to other C compilers available for the AVR that use a similar naming convention.

The historical naming style might become deprecated in a future release, so it is not recommended for new projects. 🫶

Note: The ISR() macro cannot really spell-check the argument passed to them. Thus, by misspelling one of the names below in a call to ISR(), a function will be created that, while possibly being usable as an interrupt function, is not actually wired into the interrupt vector table. The compiler will generate a warning if it detects a suspiciously looking name of a ISR() function (i.e. one that after macro replacement does not start with '__vector_').

Vector name Old vector name Description Applicable for device

okay so the list keeps going, and this stretch is the main event: every interrupt vector, the legacy SIG_* aliases it answers to, what it means, and every single chip that has it. no skips, no "and so on", we're doing all of them 💅

  • ADC_vect (aka SIG_ADC) — ADC Conversion Complete 🎀
    • 💾 AT90S2333, AT90S4433, AT90S4434, AT90S8535, AT90PWM216, AT90PWM2B, AT90PWM316, AT90PWM3B, AT90PWM3, AT90PWM2, AT90PWM1, AT90CAN128, AT90CAN32, AT90CAN64, ATmega103, ATmega128, ATmega1284P, ATmega16, ATmega163, ATmega165, ATmega165P, ATmega168P, ATmega169, ATmega169P, ATmega32, ATmega323, ATmega325, ATmega3250, ATmega3250P, ATmega328P, ATmega329, ATmega3290, ATmega3290P, ATmega48P, ATmega64, ATmega645, ATmega6450, ATmega649, ATmega6490, ATmega8, ATmega8535, ATmega88P, ATmega168, ATmega48, ATmega88, ATmega640, ATmega1280, ATmega1281, ATmega2560, ATmega2561, ATmega324P, ATmega164P, ATmega644P, ATmega644, ATtiny13, ATtiny15, ATtiny26, ATtiny43U, ATtiny48, ATtiny24, ATtiny44, ATtiny84, ATtiny45, ATtiny25, ATtiny85, ATtiny261, ATtiny461, ATtiny861, AT90USB1287, AT90USB1286, AT90USB647, AT90USB646
  • ANALOG_COMP_0_vect (aka SIG_COMPARATOR0) — Analog Comparator 0 ✨
    • 💾 AT90PWM3, AT90PWM2, AT90PWM1
  • ANALOG_COMP_1_vect (aka SIG_COMPARATOR1) — Analog Comparator 1 ✨
    • 💾 AT90PWM3, AT90PWM2, AT90PWM1
  • ANALOG_COMP_2_vect (aka SIG_COMPARATOR2) — Analog Comparator 2 ✨
    • 💾 AT90PWM3, AT90PWM2, AT90PWM1
  • ANALOG_COMP_vect (aka SIG_COMPARATOR) — Analog Comparator 🔍
    • 💾 AT90CAN128, AT90CAN32, AT90CAN64, ATmega103, ATmega128, ATmega1284P, ATmega165, ATmega165P, ATmega168P, ATmega169, ATmega169P, ATmega325, ATmega3250, ATmega3250P, ATmega328P, ATmega329, ATmega3290, ATmega3290P, ATmega48P, ATmega64, ATmega645, ATmega6450, ATmega649, ATmega6490, ATmega88P, ATmega168, ATmega48, ATmega88, ATmega640, ATmega1280, ATmega1281, ATmega2560, ATmega2561, ATmega324P, ATmega164P, ATmega644P, ATmega644, AT90USB162, AT90USB82, AT90USB1287, AT90USB1286, AT90USB647, AT90USB646
  • ANA_COMP_vect (aka SIG_COMPARATOR) — Analog Comparator 🔍 (yes, it's the same thing with a shorter name — both spellings are real)
    • 💾 AT90S1200, AT90S2313, AT90S2333, AT90S4414, AT90S4433, AT90S4434, AT90S8515, AT90S8535, ATmega16, ATmega161, ATmega162, ATmega163, ATmega32, ATmega323, ATmega8, ATmega8515, ATmega8535, ATtiny11, ATtiny12, ATtiny13, ATtiny15, ATtiny2313, ATtiny26, ATtiny28, ATtiny43U, ATtiny48, ATtiny24, ATtiny44, ATtiny84, ATtiny45, ATtiny25, ATtiny85, ATtiny261, ATtiny461, ATtiny861
  • CANIT_vect (aka SIG_CAN_INTERRUPT1) — CAN Transfer Complete or Error 🚌
    • 💾 AT90CAN128, AT90CAN32, AT90CAN64
  • EEPROM_READY_vect (aka SIG_EEPROM_READY, SIG_EE_READY) — no description in the source, bestie, she's just here with one chip 🫶
    • 💾 ATtiny2313
  • EE_RDY_vect (aka SIG_EEPROM_READY) — EEPROM Ready 💾
    • 💾 AT90S2333, AT90S4433, AT90S4434, AT90S8535, ATmega16, ATmega161, ATmega162, ATmega163, ATmega32, ATmega323, ATmega8, ATmega8515, ATmega8535, ATtiny12, ATtiny13, ATtiny15, ATtiny26, ATtiny43U, ATtiny48, ATtiny24, ATtiny44, ATtiny84, ATtiny45, ATtiny25, ATtiny85, ATtiny261, ATtiny461, ATtiny861
  • EE_READY_vect (aka SIG_EEPROM_READY) — EEPROM Ready 💾
    • 💾 AT90PWM3, AT90PWM2, AT90PWM1, AT90CAN128, AT90CAN32, AT90CAN64, ATmega103, ATmega128, ATmega1284P, ATmega165, ATmega165P, ATmega168P, ATmega169, ATmega169P, ATmega325, ATmega3250, ATmega3250P, ATmega328P, ATmega329, ATmega3290, ATmega3290P, ATmega32HVB, ATmega406, ATmega48P, ATmega64, ATmega645, ATmega6450, ATmega649, ATmega6490, ATmega88P, ATmega168, ATmega48, ATmega88, ATmega640, ATmega1280, ATmega1281, ATmega2560, ATmega2561, ATmega324P, ATmega164P, ATmega644P, ATmega644, ATmega16HVA, AT90USB162, AT90USB82, AT90USB1287, AT90USB1286, AT90USB647, AT90USB646
  • EXT_INT0_vect (aka SIG_INTERRUPT0) — External Interrupt Request 0 ⚡
    • 💾 ATtiny24, ATtiny44, ATtiny84
  • INT0_vect (aka SIG_INTERRUPT0) — External Interrupt 0 ⚡
    • 💾 AT90S1200, AT90S2313, AT90S2323, AT90S2333, AT90S2343, AT90S4414, AT90S4433, AT90S4434, AT90S8515, AT90S8535, AT90PWM216, AT90PWM2B, AT90PWM316, AT90PWM3B, AT90PWM3, AT90PWM2, AT90PWM1, AT90CAN128, AT90CAN32, AT90CAN64, ATmega103, ATmega128, ATmega1284P, ATmega16, ATmega161, ATmega162, ATmega163, ATmega165, ATmega165P, ATmega168P, ATmega169, ATmega169P, ATmega32, ATmega323, ATmega325, ATmega3250, ATmega3250P, ATmega328P, ATmega329, ATmega3290, ATmega3290P, ATmega32HVB, ATmega406, ATmega48P, ATmega64, ATmega645, ATmega6450, ATmega649, ATmega6490, ATmega8, ATmega8515, ATmega8535, ATmega88P, ATmega168, ATmega48, ATmega88, ATmega640, ATmega1280, ATmega1281, ATmega2560, ATmega2561, ATmega324P, ATmega164P, ATmega644P, ATmega644, ATmega16HVA, ATtiny11, ATtiny12, ATtiny13, ATtiny15, ATtiny22, ATtiny2313, ATtiny26, ATtiny28, ATtiny43U, ATtiny48, ATtiny45, ATtiny25, ATtiny85, ATtiny261, ATtiny461, ATtiny861, AT90USB162, AT90USB82, AT90USB1287, AT90USB1286, AT90USB647, AT90USB646
  • INT1_vect (aka SIG_INTERRUPT1) — External Interrupt Request 1 ⚡
    • 💾 AT90S2313, AT90S2333, AT90S4414, AT90S4433, AT90S4434, AT90S8515, AT90S8535, AT90PWM216, AT90PWM2B, AT90PWM316, AT90PWM3B, AT90PWM3, AT90PWM2, AT90PWM1, AT90CAN128, AT90CAN32, AT90CAN64, ATmega103, ATmega128, ATmega1284P, ATmega16, ATmega161, ATmega162, ATmega163, ATmega168P, ATmega32, ATmega323, ATmega328P, ATmega32HVB, ATmega406, ATmega48P, ATmega64, ATmega8, ATmega8515, ATmega8535, ATmega88P, ATmega168, ATmega48, ATmega88, ATmega640, ATmega1280, ATmega1281, ATmega2560, ATmega2561, ATmega324P, ATmega164P, ATmega644P, ATmega644, ATmega16HVA, ATtiny2313, ATtiny28, ATtiny48, ATtiny261, ATtiny461, ATtiny861, AT90USB162, AT90USB82, AT90USB1287, AT90USB1286, AT90USB647, AT90USB646
  • INT2_vect (aka SIG_INTERRUPT2) — External Interrupt Request 2 ⚡
    • 💾 AT90PWM3, AT90PWM2, AT90PWM1, AT90CAN128, AT90CAN32, AT90CAN64, ATmega103, ATmega128, ATmega1284P, ATmega16, ATmega161, ATmega162, ATmega32, ATmega323, ATmega32HVB, ATmega406, ATmega64, ATmega8515, ATmega8535, ATmega640, ATmega1280, ATmega1281, ATmega2560, ATmega2561, ATmega324P, ATmega164P, ATmega644P, ATmega644, ATmega16HVA, AT90USB162, AT90USB82, AT90USB1287, AT90USB1286, AT90USB647, AT90USB646
  • INT3_vect (aka SIG_INTERRUPT3) — External Interrupt Request 3 ⚡
    • 💾 AT90PWM3, AT90PWM2, AT90PWM1, AT90CAN128, AT90CAN32, AT90CAN64, ATmega103, ATmega128, ATmega32HVB, ATmega406, ATmega64, ATmega640, ATmega1280, ATmega1281, ATmega2560, ATmega2561, AT90USB162, AT90USB82, AT90USB1287, AT90USB1286, AT90USB647, AT90USB646
  • INT4_vect (aka SIG_INTERRUPT4) — External Interrupt Request 4 ⚡
    • 💾 AT90CAN128, AT90CAN32, AT90CAN64, ATmega103, ATmega128, ATmega64, ATmega640, ATmega1280, ATmega1281, ATmega2560, ATmega2561, AT90USB162, AT90USB82, AT90USB1287, AT90USB1286, AT90USB647, AT90USB646
  • INT5_vect (aka SIG_INTERRUPT5) — External Interrupt Request 5 ⚡
    • 💾 AT90CAN128, AT90CAN32, AT90CAN64, ATmega103, ATmega128, ATmega64, ATmega640, ATmega1280, ATmega1281, ATmega2560, ATmega2561, AT90USB162, AT90USB82, AT90USB1287, AT90USB1286, AT90USB647, AT90USB646
  • INT6_vect (aka SIG_INTERRUPT6) — External Interrupt Request 6 ⚡
    • 💾 AT90CAN128, AT90CAN32, AT90CAN64, ATmega103, ATmega128, ATmega64, ATmega640, ATmega1280, ATmega1281, ATmega2560, ATmega2561, AT90USB162, AT90USB82, AT90USB1287, AT90USB1286, AT90USB647, AT90USB646
  • INT7_vect (aka SIG_INTERRUPT7) — External Interrupt Request 7 ⚡
    • 💾 AT90CAN128, AT90CAN32, AT90CAN64, ATmega103, ATmega128, ATmega64, ATmega640, ATmega1280, ATmega1281, ATmega2560, ATmega2561, AT90USB162, AT90USB82, AT90USB1287, AT90USB1286, AT90USB647, AT90USB646
  • IO_PINS_vect (aka SIG_PIN, SIG_PIN_CHANGE) — External Interrupt Request 0 📍
    • 💾 ATtiny11, ATtiny12, ATtiny15, ATtiny26
  • LCD_vect (aka SIG_LCD) — LCD Start of Frame 🖥️
    • 💾 ATmega169, ATmega169P, ATmega329, ATmega3290, ATmega3290P, ATmega649, ATmega6490
  • LOWLEVEL_IO_PINS_vect (aka SIG_PIN) — Low-level Input on Port B 📍
    • 💾 ATtiny28
  • OVRIT_vect (aka SIG_CAN_OVERFLOW1) — CAN Timer Overrun 🚌
    • 💾 AT90CAN128, AT90CAN32, AT90CAN64
  • PCINT0_vect (aka SIG_PIN_CHANGE0) — Pin Change Interrupt Request 0 🦋
    • 💾 ATmega162, ATmega165, ATmega165P, ATmega168P, ATmega169, ATmega169P, ATmega325, ATmega3250, ATmega3250P, ATmega328P, ATmega329, ATmega3290, ATmega3290P, ATmega32HVB, ATmega406, ATmega48P, ATmega645, ATmega6450, ATmega649, ATmega6490, ATmega88P, ATmega168, ATmega48, ATmega88, ATmega640, ATmega1280, ATmega1281, ATmega2560, ATmega2561, ATmega324P, ATmega164P, ATmega644P, ATmega644, ATtiny13, ATtiny43U, ATtiny48, ATtiny24, ATtiny44, ATtiny84, ATtiny45, ATtiny25, ATtiny85, AT90USB162, AT90USB82, AT90USB1287, AT90USB1286, AT90USB647, AT90USB646
  • PCINT1_vect (aka SIG_PIN_CHANGE1) — Pin Change Interrupt Request 1 🦋
    • 💾 ATmega162, ATmega165, ATmega165P, ATmega168P, ATmega169, ATmega169P, ATmega325, ATmega3250, ATmega3250P, ATmega328P, ATmega329, ATmega3290, ATmega3290P, ATmega32HVB, ATmega406, ATmega48P, ATmega645, ATmega6450, ATmega649, ATmega6490, ATmega88P, ATmega168, ATmega48, ATmega88, ATmega640, ATmega1280, ATmega1281, ATmega2560, ATmega2561, ATmega324P, ATmega164P, ATmega644P, ATmega644, ATtiny43U, ATtiny48, ATtiny24, ATtiny44, ATtiny84, AT90USB162, AT90USB82
  • PCINT2_vect (aka SIG_PIN_CHANGE2) — Pin Change Interrupt Request 2 🦋
    • 💾 ATmega3250, ATmega3250P, ATmega328P, ATmega3290, ATmega3290P, ATmega48P, ATmega6450, ATmega6490, ATmega88P, ATmega168, ATmega48, ATmega88, ATmega640, ATmega1280, ATmega1281, ATmega2560, ATmega2561, ATmega324P, ATmega164P, ATmega644P, ATmega644, ATtiny48
  • PCINT3_vect (aka SIG_PIN_CHANGE3) — Pin Change Interrupt Request 3 🦋
    • 💾 ATmega3250, ATmega3250P, ATmega3290, ATmega3290P, ATmega6450, ATmega6490, ATmega324P, ATmega164P, ATmega644P, ATmega644, ATtiny48
  • PCINT_vect (aka SIG_PIN_CHANGE, SIG_PCINT) — no description in the source either, just the chip list, iconic honestly 👑
    • 💾 ATtiny2313, ATtiny261, ATtiny461, ATtiny861
  • PSC0_CAPT_vect (aka SIG_PSC0_CAPTURE) — PSC0 Capture Event 🎯
    • 💾 AT90PWM3, AT90PWM2, AT90PWM1
  • PSC0_EC_vect (aka SIG_PSC0_END_CYCLE) — PSC0 End Cycle 🔁
    • 💾 AT90PWM3, AT90PWM2, AT90PWM1
  • PSC1_CAPT_vect (aka SIG_PSC1_CAPTURE) — PSC1 Capture Event 🎯
    • 💾 AT90PWM3, AT90PWM2, AT90PWM1
  • PSC1_EC_vect (aka SIG_PSC1_END_CYCLE) — PSC1 End Cycle 🔁
    • 💾 AT90PWM3, AT90PWM2, AT90PWM1
  • PSC2_CAPT_vect (aka SIG_PSC2_CAPTURE) — PSC2 Capture Event 🎯
    • 💾 AT90PWM3, AT90PWM2, AT90PWM1
  • PSC2_EC_vect (aka SIG_PSC2_END_CYCLE) — PSC2 End Cycle 🔁
    • 💾 AT90PWM3, AT90PWM2, AT90PWM1
  • SPI_STC_vect (aka SIG_SPI) — Serial Transfer Complete 🔌
    • 💾 AT90S2333, AT90S4414, AT90S4433, AT90S4434, AT90S8515, AT90S8535, AT90PWM216, AT90PWM2B, AT90PWM316, AT90PWM3B, AT90PWM3, AT90PWM2, AT90PWM1, AT90CAN128, AT90CAN32, AT90CAN64, ATmega103, ATmega128, ATmega1284P, ATmega16, ATmega161, ATmega162, ATmega163, ATmega165, ATmega165P, ATmega168P, ATmega169, ATmega169P, ATmega32, ATmega323, ATmega325, ATmega3250, ATmega3250P, ATmega328P, ATmega329, ATmega3290, ATmega3290P, ATmega32HVB, ATmega48P, ATmega64, ATmega645, ATmega6450, ATmega649, ATmega6490, ATmega8, ATmega8515, ATmega8535, ATmega88P, ATmega168, ATmega48, ATmega88, ATmega640, ATmega1280, ATmega1281, ATmega2560, ATmega2561, ATmega324P, ATmega164P, ATmega644P, ATmega644, ATmega16HVA, ATtiny48, AT90USB162, AT90USB82, AT90USB1287, AT90USB1286, AT90USB647, AT90USB646
  • SPM_RDY_vect (aka SIG_SPM_READY) — Store Program Memory Ready 🧠
    • 💾 ATmega16, ATmega162, ATmega32, ATmega323, ATmega8, ATmega8515, ATmega8535
  • SPM_READY_vect (aka SIG_SPM_READY) — Store Program Memory Read 🧠
    • 💾 AT90PWM3, AT90PWM2, AT90PWM1, AT90CAN128, AT90CAN32, AT90CAN64, ATmega128, ATmega1284P, ATmega165, ATmega165P, ATmega168P, ATmega169, ATmega169P, ATmega325, ATmega3250, ATmega3250P, ATmega328P, ATmega329, ATmega3290, ATmega3290P, ATmega406, ATmega48P, ATmega64, ATmega645, ATmega6450, ATmega649, ATmega6490, ATmega88P, ATmega168, ATmega48, ATmega88, ATmega640, ATmega1280, ATmega1281, ATmega2560, ATmega2561, ATmega324P, ATmega164P, ATmega644P, ATmega644, AT90USB162, AT90USB82,

...and also AT90USB1287, AT90USB1286, AT90USB647, AT90USB646. 💖

  • TIM0_COMPA_vect / SIG_OUTPUT_COMPARE0A — Timer/Counter Compare Match A — ATtiny13, ATtiny43U, ATtiny24, ATtiny44, ATtiny84, ATtiny45, ATtiny25, ATtiny85
  • TIM0_COMPB_vect / SIG_OUTPUT_COMPARE0B — Timer/Counter Compare Match B — ATtiny13, ATtiny43U, ATtiny24, ATtiny44, ATtiny84, ATtiny45, ATtiny25, ATtiny85
  • TIM0_OVF_vect / SIG_OVERFLOW0 — Timer/Counter0 Overflow — ATtiny13, ATtiny43U, ATtiny24, ATtiny44, ATtiny84, ATtiny45, ATtiny25, ATtiny85
  • TIM1_CAPT_vect / SIG_INPUT_CAPTURE1 — Timer/Counter1 Capture Event — ATtiny24, ATtiny44, ATtiny84
  • TIM1_COMPA_vect / SIG_OUTPUT_COMPARE1A — Timer/Counter1 Compare Match A — ATtiny24, ATtiny44, ATtiny84, ATtiny45, ATtiny25, ATtiny85
  • TIM1_COMPB_vect / SIG_OUTPUT_COMPARE1B — Timer/Counter1 Compare Match B — ATtiny24, ATtiny44, ATtiny84, ATtiny45, ATtiny25, ATtiny85
  • TIM1_OVF_vect / SIG_OVERFLOW1 — Timer/Counter1 Overflow — ATtiny24, ATtiny44, ATtiny84, ATtiny45, ATtiny25, ATtiny85
  • TIMER0_CAPT_vect / SIG_INPUT_CAPTURE0 — ADC Conversion Complete — ATtiny261, ATtiny461, ATtiny861
  • TIMER0_COMPA_vect / SIG_OUTPUT_COMPARE0A — TimerCounter0 Compare Match A — ATmega168, ATmega48, ATmega88, ATmega640, ATmega1280, ATmega1281, ATmega2560, ATmega2561, ATmega324P, ATmega164P, ATmega644P, ATmega644, ATmega16HVA, ATtiny2313, ATtiny48, ATtiny261, ATtiny461, ATtiny861, AT90USB162, AT90USB82, AT90USB1287, AT90USB1286, AT90USB647, AT90USB646
  • TIMER0_COMPB_vect / SIG_OUTPUT_COMPARE0B, SIG_OUTPUT_COMPARE0_B — Timer Counter 0 Compare Match B — AT90PWM3, AT90PWM2, AT90PWM1, ATmega1284P, ATmega168P, ATmega328P, ATmega32HVB, ATmega48P, ATmega88P, ATmega168, ATmega48, ATmega88, ATmega640, ATmega1280, ATmega1281, ATmega2560, ATmega2561, ATmega324P, ATmega164P, ATmega644P, ATmega644, ATmega16HVA, ATtiny2313, ATtiny48, ATtiny261, ATtiny461, ATtiny861, AT90USB162, AT90USB82, AT90USB1287, AT90USB1286, AT90USB647, AT90USB646
  • TIMER0_COMP_A_vect / SIG_OUTPUT_COMPARE0A, SIG_OUTPUT_COMPARE0_A — Timer/Counter0 Compare Match A — AT90PWM3, AT90PWM2, AT90PWM1
  • TIMER0_COMP_vect / SIG_OUTPUT_COMPARE0 — Timer/Counter0 Compare Match — AT90CAN128, AT90CAN32, AT90CAN64, ATmega103, ATmega128, ATmega16, ATmega161, ATmega162, ATmega165, ATmega165P, ATmega169, ATmega169P, ATmega32, ATmega323, ATmega325, ATmega3250, ATmega3250P, ATmega329, ATmega3290, ATmega3290P, ATmega64, ATmega645, ATmega6450, ATmega649, ATmega6490, ATmega8515, ATmega8535
  • TIMER0_OVF0_vect / SIG_OVERFLOW0 — Timer/Counter0 Overflow — AT90S2313, AT90S2323, AT90S2343, ATtiny22, ATtiny26
  • TIMER0_OVF_vect / SIG_OVERFLOW0 — Timer/Counter0 Overflow — AT90S1200, AT90S2333, AT90S4414, AT90S4433, AT90S4434, AT90S8515, AT90S8535, AT90PWM216, AT90PWM2B, AT90PWM316, AT90PWM3B, AT90PWM3, AT90PWM2, AT90PWM1, AT90CAN128, AT90CAN32, AT90CAN64, ATmega103, ATmega128, ATmega1284P, ATmega16, ATmega161, ATmega162, ATmega163, ATmega165, ATmega165P, ATmega168P, ATmega169, ATmega169P, ATmega32, ATmega323, ATmega325, ATmega3250, ATmega3250P, ATmega328P, ATmega329, ATmega3290, ATmega3290P, ATmega32HVB, ATmega48P, ATmega64, ATmega645, ATmega6450, ATmega649, ATmega6490, ATmega8, ATmega8515, ATmega8535, ATmega88P, ATmega168, ATmega48, ATmega88, ATmega640, ATmega1280, ATmega1281, ATmega2560, ATmega2561, ATmega324P, ATmega164P, ATmega644P, ATmega644, ATmega16HVA, ATtiny11, ATtiny12, ATtiny15, ATtiny2313, ATtiny28, ATtiny48, ATtiny261, ATtiny461, ATtiny861, AT90USB162, AT90USB82, AT90USB1287, AT90USB1286, AT90USB647, AT90USB646
  • TIMER1_CAPT1_vect / SIG_INPUT_CAPTURE1 — Timer/Counter1 Capture Event — AT90S2313
  • TIMER1_CAPT_vect / SIG_INPUT_CAPTURE1 — Timer/Counter Capture Event — AT90S2333, AT90S4414, AT90S4433, AT90S4434, AT90S8515, AT90S8535, AT90PWM216, AT90PWM2B, AT90PWM316, AT90PWM3B, AT90PWM3, AT90PWM2, AT90PWM1, AT90CAN128, AT90CAN32, AT90CAN64, ATmega103, ATmega128, ATmega1284P, ATmega16, ATmega161, ATmega162, ATmega163, ATmega165, ATmega165P, ATmega168P, ATmega169, ATmega169P, ATmega32, ATmega323, ATmega325, ATmega3250, ATmega3250P, ATmega328P, ATmega329, ATmega3290, ATmega3290P, ATmega48P, ATmega64, ATmega645, ATmega6450, ATmega649, ATmega6490, ATmega8, ATmega8515, ATmega8535, ATmega88P, ATmega168, ATmega48, ATmega88, ATmega640, ATmega1280, ATmega1281, ATmega2560, ATmega2561, ATmega324P, ATmega164P, ATmega644P, ATmega644, ATtiny2313, ATtiny48, AT90USB162, AT90USB82, AT90USB1287, AT90USB1286, AT90USB647, AT90USB646
  • TIMER1_CMPA_vect / SIG_OUTPUT_COMPARE1A — Timer/Counter1 Compare Match 1A — ATtiny26
  • TIMER1_CMPB_vect / SIG_OUTPUT_COMPARE1B — Timer/Counter1 Compare Match 1B — ATtiny26
  • TIMER1_COMP1_vect / SIG_OUTPUT_COMPARE1A — Timer/Counter1 Compare Match — AT90S2313
  • TIMER1_COMPA_vect / SIG_OUTPUT_COMPARE1A — Timer/Counter1 Compare Match A — AT90S4414, AT90S4434, AT90S8515, AT90S8535, AT90PWM216, AT90PWM2B, AT90PWM316, AT90PWM3B, AT90PWM3, AT90PWM2, AT90PWM1, AT90CAN128, AT90CAN32, AT90CAN64, ATmega103, ATmega128, ATmega1284P, ATmega16, ATmega161, ATmega162, ATmega163, ATmega165, ATmega165P, ATmega168P, ATmega169, ATmega169P, ATmega32, ATmega323, ATmega325, ATmega3250, ATmega3250P, ATmega328P, ATmega329, ATmega3290, ATmega3290P, ATmega32HVB, ATmega48P, ATmega64, ATmega645, ATmega6450, ATmega649, ATmega6490, ATmega8, ATmega8515, ATmega8535, ATmega88P, ATmega168, ATmega48, ATmega88, ATmega640, ATmega1280, ATmega1281, ATmega2560, ATmega2561, ATmega324P, ATmega164P, ATmega644P, ATmega644, ATmega16HVA, ATtiny2313, ATtiny48, ATtiny261, ATtiny461, ATtiny861, AT90USB162, AT90USB82, AT90USB1287, AT90USB1286, AT90USB647, AT90USB646
  • TIMER1_COMPB_vect / SIG_OUTPUT_COMPARE1B — Timer/Counter1 Compare MatchB — AT90S4414, AT90S4434, AT90S8515, AT90S8535, AT90PWM216, AT90PWM2B, AT90PWM316, AT90PWM3B, AT90PWM3, AT90PWM2, AT90PWM1, AT90CAN128, AT90CAN32, AT90CAN64, ATmega103, ATmega128, ATmega1284P, ATmega16, ATmega161, ATmega162, ATmega163, ATmega165, ATmega165P, ATmega168P, ATmega169, ATmega169P, ATmega32, ATmega323, ATmega325, ATmega3250, ATmega3250P, ATmega328P, ATmega329, ATmega3290, ATmega3290P, ATmega32HVB, ATmega48P, ATmega64, ATmega645, ATmega6450, ATmega649, ATmega6490, ATmega8, ATmega8515, ATmega8535, ATmega88P, ATmega168, ATmega48, ATmega88, ATmega640, ATmega1280, ATmega1281, ATmega2560, ATmega2561, ATmega324P, ATmega164P, ATmega644P, ATmega644, ATmega16HVA, ATtiny2313, ATtiny48, ATtiny261, ATtiny461, ATtiny861, AT90USB162, AT90USB82, AT90USB1287, AT90USB1286, AT90USB647, AT90USB646
  • TIMER1_COMPC_vect / SIG_OUTPUT_COMPARE1C — Timer/Counter1 Compare Match C — AT90CAN128, AT90CAN32, AT90CAN64, ATmega128, ATmega64, ATmega640, ATmega1280, ATmega1281, ATmega2560, ATmega2561, AT90USB162, AT90USB82, AT90USB1287, AT90USB1286, AT90USB647, AT90USB646
  • TIMER1_COMPD_vect / SIG_OUTPUT_COMPARE0D — Timer/Counter1 Compare Match D — ATtiny261, ATtiny461, ATtiny861
  • TIMER1_COMP_vect / SIG_OUTPUT_COMPARE1A — Timer/Counter1 Compare Match — AT90S2333, AT90S4433, ATtiny15
  • TIMER1_OVF1_vect / SIG_OVERFLOW1 — Timer/Counter1 Overflow — AT90S2313, ATtiny26
  • TIMER1_OVF_vect / SIG_OVERFLOW1 — Timer/Counter1 Overflow — AT90S2333, AT90S4414, AT90S4433, AT90S4434, AT90S8515, AT90S8535, AT90PWM216, AT90PWM2B, AT90PWM316, AT90PWM3B, AT90PWM3, AT90PWM2, AT90PWM1, AT90CAN128, AT90CAN32, AT90CAN64, ATmega103, ATmega128, ATmega1284P, ATmega16, ATmega161, ATmega162, ATmega163, ATmega165, ATmega165P, ATmega168P, ATmega169, ATmega169P, ATmega32, ATmega323, ATmega325, ATmega3250, ATmega3250P, ATmega328P, ATmega329, ATmega3290, ATmega3290P, ATmega32HVB, ATmega48P, ATmega64, ATmega645, ATmega6450, ATmega649, ATmega6490, ATmega8, ATmega8515, ATmega8535, ATmega88P, ATmega168, ATmega48, ATmega88, ATmega640, ATmega1280, ATmega1281, ATmega2560, ATmega2561, ATmega324P, ATmega164P, ATmega644P, ATmega644, ATmega16HVA, ATtiny15, ATtiny2313, ATtiny48, ATtiny261, ATtiny461, ATtiny861, AT90USB162, AT90USB82, AT90USB1287, AT90USB1286, AT90USB647, AT90USB646
  • TIMER2_COMPA_vect / SIG_OUTPUT_COMPARE2A — Timer/Counter2 Compare Match A — ATmega168, ATmega48, ATmega88, ATmega640, ATmega1280, ATmega1281, ATmega2560, ATmega2561, ATmega324P, ATmega164P, ATmega644P, ATmega644, AT90USB1287, AT90USB1286, AT90USB647, AT90USB646
  • TIMER2_COMPB_vect / SIG_OUTPUT_COMPARE2B — Timer/Counter2 Compare Match A — ATmega168, ATmega48, ATmega88, ATmega640, ATmega1280, ATmega1281, ATmega2560, ATmega2561, ATmega324P, ATmega164P, ATmega644P, ATmega644, AT90USB1287, AT90USB1286, AT90USB647, AT90USB646
  • TIMER2_COMP_vect / SIG_OUTPUT_COMPARE2 — Timer/Counter2 Compare Match — AT90S4434, AT90S8535, AT90CAN128, AT90CAN32, AT90CAN64, ATmega103, ATmega128, ATmega16, ATmega161, ATmega162, ATmega163, ATmega165, ATmega165P, ATmega169, ATmega169P, ATmega32, ATmega323, ATmega325, ATmega3250, ATmega3250P, ATmega329, ATmega3290, ATmega3290P, ATmega64, ATmega645, ATmega6450, ATmega649, ATmega6490, ATmega8, ATmega8535
  • TIMER2_OVF_vect / SIG_OVERFLOW2 — Timer/Counter2 Overflow — AT90S4434, AT90S8535, AT90CAN128, AT90CAN32, AT90CAN64, ATmega103, ATmega128, ATmega1284P, ATmega16, ATmega161, ATmega162, ATmega163, ATmega165, ATmega165P, ATmega168P, ATmega169, ATmega169P, ATmega32, ATmega323, ATmega325, ATmega3250, ATmega3250P, ATmega328P, ATmega329, ATmega3290, ATmega3290P, ATmega48P, ATmega64, ATmega645, ATmega6450, ATmega649, ATmega6490, ATmega8, ATmega8535, ATmega88P, ATmega168, ATmega48, ATmega88, ATmega640, ATmega1280, ATmega1281, ATmega2560, ATmega2561, ATmega324P, ATmega164P, ATmega644P, ATmega644, AT90USB1287, AT90USB1286, AT90USB647, AT90USB646
  • TIMER3_CAPT_vect / SIG_INPUT_CAPTURE3 — Timer/Counter3 Capture Event — AT90CAN128, AT90CAN32, AT90CAN64, ATmega128, ATmega1284P, ATmega162, ATmega64, ATmega640, ATmega1280, ATmega1281, ATmega2560, ATmega2561, AT90USB1287, AT90USB1286, AT90USB647, AT90USB646
  • TIMER3_COMPA_vect / SIG_OUTPUT_COMPARE3A — Timer/Counter3 Compare Match A — AT90CAN128, AT90CAN32, AT90CAN64, ATmega128, ATmega1284P, ATmega162, ATmega64, ATmega640, ATmega1280, ATmega1281, ATmega2560, ATmega2561, AT90USB1287, AT90USB1286, AT90USB647, AT90USB646
  • TIMER3_COMPB_vect / SIG_OUTPUT_COMPARE3B — Timer/Counter3 Compare Match B — AT90CAN128, AT90CAN32, AT90CAN64, ATmega128, ATmega1284P, ATmega162, ATmega64, ATmega640, ATmega1280, ATmega1281, ATmega2560, ATmega2561, AT90USB1287, AT90USB1286, AT90USB647, AT90USB646
  • TIMER3_COMPC_vect / SIG_OUTPUT_COMPARE3C — Timer/Counter3 Compare Match C — AT90CAN128, AT90CAN32, AT90CAN64, ATmega128, ATmega64, ATmega640, ATmega1280, ATmega1281, ATmega2560, ATmega2561, AT90USB1287, AT90USB1286, AT90USB647, AT90USB646
  • TIMER3_OVF_vect / SIG_OVERFLOW3 — Timer/Counter3 Overflow — AT90CAN128, AT90CAN32, AT90CAN64, ATmega128, ATmega1284P, ATmega162, ATmega64, ATmega640, ATmega1280, ATmega1281, ATmega2560, ATmega2561, AT90USB1287, AT90USB1286, AT90USB647, AT90USB646
  • TIMER4_CAPT_vect / SIG_INPUT_CAPTURE4 — Timer/Counter4 Capture Event — ATmega640, ATmega1280, ATmega1281, ATmega2560, ATmega2561
  • TIMER4_COMPA_vect / SIG_OUTPUT_COMPARE4A — Timer/Counter4 Compare Match A — ATmega640, ATmega1280, ATmega1281, ATmega2560, ATmega2561
  • TIMER4_COMPB_vect / SIG_OUTPUT_COMPARE4B — Timer/Counter4 Compare Match B — ATmega640, ATmega1280, ATmega1281, ATmega2560, ATmega2561
  • TIMER4_COMPC_vect — SIG_OUTPUT_COMPARE4C — Timer/Counter4 Compare Match C — ATmega640, ATmega1280, ATmega1281, ATmega2560, ATmega2561 💖
  • TIMER4_OVF_vect — SIG_OVERFLOW4 — Timer/Counter4 Overflow — ATmega640, ATmega1280, ATmega1281, ATmega2560, ATmega2561 ✨
  • TIMER5_CAPT_vect — SIG_INPUT_CAPTURE5 — Timer/Counter5 Capture Event — ATmega640, ATmega1280, ATmega1281, ATmega2560, ATmega2561 🎀
  • TIMER5_COMPA_vect — SIG_OUTPUT_COMPARE5A — Timer/Counter5 Compare Match A — ATmega640, ATmega1280, ATmega1281, ATmega2560, ATmega2561 🦋
  • TIMER5_COMPB_vect — SIG_OUTPUT_COMPARE5B — Timer/Counter5 Compare Match B — ATmega640, ATmega1280, ATmega1281, ATmega2560, ATmega2561 🌸
  • TIMER5_COMPC_vect — SIG_OUTPUT_COMPARE5C — Timer/Counter5 Compare Match C — ATmega640, ATmega1280, ATmega1281, ATmega2560, ATmega2561 💅
  • TIMER5_OVF_vect — SIG_OVERFLOW5 — Timer/Counter5 Overflow — ATmega640, ATmega1280, ATmega1281, ATmega2560, ATmega2561 🫶
  • TWI_vect — SIG_2WIRE_SERIAL — 2-wire Serial Interface — AT90CAN128, AT90CAN32, AT90CAN64, ATmega128, ATmega1284P, ATmega16, ATmega163, ATmega168P, ATmega32, ATmega323, ATmega328P, ATmega32HVB, ATmega406, ATmega48P, ATmega64, ATmega8, ATmega8535, ATmega88P, ATmega168, ATmega48, ATmega88, ATmega640, ATmega1280, ATmega1281, ATmega2560, ATmega2561, ATmega324P, ATmega164P, ATmega644P, ATmega644, ATtiny48, AT90USB1287, AT90USB1286, AT90USB647, AT90USB646 😭
  • TXDONE_vect — SIG_TXDONE — Transmission Done, Bit Timer Flag 2 Interrupt — AT86RF401 🔥
  • TXEMPTY_vect — SIG_TXBE — Transmit Buffer Empty, Bit Itmer Flag 0 Interrupt — AT86RF401 👑
  • UART0_RX_vect — SIG_UART0_RECV — UART0, Rx Complete — ATmega161 🌈
  • UART0_TX_vect — SIG_UART0_TRANS — UART0, Tx Complete — ATmega161 ⭐
  • UART0_UDRE_vect — SIG_UART0_DATA — UART0 Data Register Empty — ATmega161 💀
  • UART1_RX_vect — SIG_UART1_RECV — UART1, Rx Complete — ATmega161 🙈
  • UART1_TX_vect — SIG_UART1_TRANS — UART1, Tx Complete — ATmega161 🍓
  • UART1_UDRE_vect — SIG_UART1_DATA — UART1 Data Register Empty — ATmega161 🧚
  • UART_RX_vect — SIG_UART_RECV — UART, Rx Complete — AT90S2313, AT90S2333, AT90S4414, AT90S4433, AT90S4434, AT90S8515, AT90S8535, ATmega103, ATmega163, ATmega8515 💜
  • UART_TX_vect — SIG_UART_TRANS — UART, Tx Complete — AT90S2313, AT90S2333, AT90S4414, AT90S4433, AT90S4434, AT90S8515, AT90S8535, ATmega103, ATmega163, ATmega8515 💖
  • UART_UDRE_vect — SIG_UART_DATA — UART Data Register Empty — AT90S2313, AT90S2333, AT90S4414, AT90S4433, AT90S4434, AT90S8515, AT90S8535, ATmega103, ATmega163, ATmega8515 ✨

and now the USART era begins, no cap 💅

  • USART0_RXC_vect — SIG_USART0_RECV — USART0, Rx Complete — ATmega162 🎀
  • USART0_RX_vect — SIG_UART0_RECV — USART0, Rx Complete — AT90CAN128, AT90CAN32, AT90CAN64, ATmega128, ATmega1284P, ATmega165, ATmega165P, ATmega169, ATmega169P, ATmega325, ATmega329, ATmega64, ATmega645, ATmega649, ATmega640, ATmega1280, ATmega1281, ATmega2560, ATmega2561, ATmega324P, ATmega164P, ATmega644P, ATmega644 🦋
  • USART0_TXC_vect — SIG_USART0_TRANS — USART0, Tx Complete — ATmega162 🌸
  • USART0_TX_vect — SIG_UART0_TRANS — USART0, Tx Complete — AT90CAN128, AT90CAN32, AT90CAN64, ATmega128, ATmega1284P, ATmega165, ATmega165P, ATmega169, ATmega169P, ATmega325, ATmega3250, ATmega3250P, ATmega329, ATmega3290, ATmega3290P, ATmega64, ATmega645, ATmega6450, ATmega649, ATmega6490, ATmega640, ATmega1280, ATmega1281, ATmega2560, ATmega2561, ATmega324P, ATmega164P, ATmega644P, ATmega644 💅
  • USART0_UDRE_vect — SIG_UART0_DATA — USART0 Data Register Empty — AT90CAN128, AT90CAN32, AT90CAN64, ATmega128, ATmega1284P, ATmega162, ATmega165, ATmega165P, ATmega169, ATmega169P, ATmega325, ATmega329, ATmega64, ATmega645, ATmega649, ATmega640, ATmega1280, ATmega1281, ATmega2560, ATmega2561, ATmega324P, ATmega164P, ATmega644P, ATmega644 🫶
  • USART1_RXC_vect — SIG_USART1_RECV — USART1, Rx Complete — ATmega162 😭
  • USART1_RX_vect — SIG_UART1_RECV — USART1, Rx Complete — AT90CAN128, AT90CAN32, AT90CAN64, ATmega128, ATmega1284P, ATmega64, ATmega640, ATmega1280, ATmega1281, ATmega2560, ATmega2561, ATmega324P, ATmega164P, ATmega644P, ATmega644, AT90USB162, AT90USB82, AT90USB1287, AT90USB1286, AT90USB647, AT90USB646 🔥
  • USART1_TXC_vect — SIG_USART1_TRANS — USART1, Tx Complete — ATmega162 👑
  • USART1_TX_vect — SIG_UART1_TRANS — USART1, Tx Complete — AT90CAN128, AT90CAN32, AT90CAN64, ATmega128, ATmega1284P, ATmega64, ATmega640, ATmega1280, ATmega1281, ATmega2560, ATmega2561, ATmega324P, ATmega164P, ATmega644P, ATmega644, AT90USB162, AT90USB82, AT90USB1287, AT90USB1286, AT90USB647, AT90USB646 🌈
  • USART1_UDRE_vect — SIG_UART1_DATA — USART1, Data Register Empty — AT90CAN128, AT90CAN32, AT90CAN64, ATmega128, ATmega1284P, ATmega162, ATmega64, ATmega640, ATmega1280, ATmega1281, ATmega2560, ATmega2561, ATmega324P, ATmega164P, ATmega644P, ATmega644, AT90USB162, AT90USB82, AT90USB1287, AT90USB1286, AT90USB647, AT90USB646 ⭐
  • USART2_RX_vect — SIG_USART2_RECV — USART2, Rx Complete — ATmega640, ATmega1280, ATmega1281, ATmega2560, ATmega2561 💀
  • USART2_TX_vect — SIG_USART2_TRANS — USART2, Tx Complete — ATmega640, ATmega1280, ATmega1281, ATmega2560, ATmega2561 🙈
  • USART2_UDRE_vect — SIG_USART2_DATA — USART2 Data register Empty — ATmega640, ATmega1280, ATmega1281, ATmega2560, ATmega2561 🍓
  • USART3_RX_vect — SIG_USART3_RECV — USART3, Rx Complete — ATmega640, ATmega1280, ATmega1281, ATmega2560, ATmega2561 🧚
  • USART3_TX_vect — SIG_USART3_TRANS — USART3, Tx Complete — ATmega640, ATmega1280, ATmega1281, ATmega2560, ATmega2561 💜
  • USART3_UDRE_vect — SIG_USART3_DATA — USART3 Data register Empty — ATmega640, ATmega1280, ATmega1281, ATmega2560, ATmega2561 💖
  • USART_RXC_vect — SIG_USART_RECV, SIG_UART_RECV — USART, Rx Complete — ATmega16, ATmega32, ATmega323, ATmega8 ✨
  • USART_RX_vect — SIG_USART_RECV, SIG_UART_RECV — USART, Rx Complete — AT90PWM3, AT90PWM2, AT90PWM1, ATmega168P, ATmega3250, ATmega3250P, ATmega328P, ATmega3290, ATmega3290P, ATmega48P, ATmega6450, ATmega6490, ATmega8535, ATmega88P, ATmega168, ATmega48, ATmega88, ATtiny2313 🎀
  • USART_TXC_vect — SIG_USART_TRANS, SIG_UART_TRANS — USART, Tx Complete — ATmega16, ATmega32, ATmega323, ATmega8 🦋
  • USART_TX_vect — SIG_USART_TRANS, SIG_UART_TRANS — USART, Tx Complete — AT90PWM3, AT90PWM2, AT90PWM1, ATmega168P, ATmega328P, ATmega48P, ATmega8535, ATmega88P, ATmega168, ATmega48, ATmega88, ATtiny2313 🌸
  • USART_UDRE_vect — SIG_USART_DATA, SIG_UART_DATA — USART Data Register Empty — AT90PWM3, AT90PWM2, AT90PWM1, ATmega16, ATmega168P, ATmega32, ATmega323, ATmega3250, ATmega3250P, ATmega328P, ATmega3290, ATmega3290P, ATmega48P, ATmega6450, ATmega6490, ATmega8, ATmega8535, ATmega88P, ATmega168, ATmega48, ATmega88, ATtiny2313 💅
  • USI_OVERFLOW_vect — SIG_USI_OVERFLOW — USI Overflow — ATmega165, ATmega165P, ATmega169, ATmega169P, ATmega325, ATmega3250, ATmega3250P, ATmega329, ATmega3290, ATmega3290P, ATmega645, ATmega6450, ATmega649, ATmega6490, ATtiny2313 🫶
  • USI_OVF_vect — SIG_USI_OVERFLOW — USI Overflow — ATtiny26, ATtiny43U, ATtiny24, ATtiny44, ATtiny84, ATtiny45, ATtiny25, ATtiny85, ATtiny261, ATtiny461, ATtiny861 😭
  • USI_START_vect — SIG_USI_START — USI Start Condition — ATmega165, ATmega165P, ATmega169, ATmega169P, ATmega325, ATmega3250, ATmega3250P, ATmega329, ATmega3290, ATmega3290P, ATmega645, ATmega6450, ATmega649, ATmega6490, ATtiny2313, ATtiny43U, ATtiny45, ATtiny25, ATtiny85, ATtiny261, ATtiny461, ATtiny861 🔥
  • USI_STRT_vect — SIG_USI_START — USI Start — ATtiny26 👑
  • USI_STR_vect — SIG_USI_START — USI START — ATtiny24, ATtiny44, ATtiny84 🌈
  • WATCHDOG_vect — SIG_WATCHDOG_TIMEOUT — Watchdog Time-out — ATtiny24, ATtiny44, ATtiny84 ⭐
  • WDT_OVERFLOW_vect — SIG_WATCHDOG_TIMEOUT, SIG_WDT_OVERFLOW — Watchdog Timer Overflow — ATtiny2313 💀
  • WDT_vect — SIG_WDT, SIG_WATCHDOG_TIMEOUT — Watchdog Timeout Interrupt — AT90PWM3, AT90PWM2, AT90PWM1, ATmega1284P, ATmega168P, ATmega328P, ATmega32HVB, ATmega406, ATmega48P, ATmega88P, ATmega168, ATmega48, ATmega88, ATmega640, ATmega1280, ATmega1281, ATmega2560, ATmega2561, ATmega324P, ATmega164P, ATmega644P, ATmega644, ATmega16HVA, ATtiny13, ATtiny43U, ATtiny48, ATtiny45, ATtiny25, ATtiny85, ATtiny261, ATtiny461, ATtiny861, AT90USB162, AT90USB82, AT90USB1287, AT90USB1286, AT90USB647, AT90USB646 🙈

✨ Macro Definition Documentation ✨

okay bestie, this is the macro hall of fame 💅 every single one of these is here, no skips, no cap. let's go one by one and keep all the facts intact, periodt.

#define BADISR_vect

#include <avr/interrupt.h>

This is a vector which is aliased to __vector_default, the vector executed when an ISR fires with no accompanying ISR handler. This may be used along with the ISR() macro to create a catch-all for undefined but used ISRs for debugging purposes. it's giving safety net energy 🫶

#define cli()

Disables all interrupts by clearing the global interrupt mask. This function actually compiles into a single line of assembly, so there is no function call overhead. However, the macro also implies a memory barrier which can cause additional loss of optimization. ngl, that tradeoff is lowkey iconic

In order to implement atomic access to multi-byte objects, consider using the macros from <util/atomic.h>, rather than implementing them manually with cli() and sei().

#define EMPTY_INTERRUPT(vector)

Defines an empty interrupt handler function. This will not generate any prolog or epilog code and will only return from the ISR. Do not define a function body as this will define it for you. Example:

EMPTY_INTERRUPT(ADC_vect);

#define ISR(vector, attributes)

Introduces an interrupt handler function (interrupt service routine) that runs with global interrupts initially disabled by default with no attributes specified.

The attributes are optional and alter the behaviour and resultant generated code of the interrupt routine. Multiple attributes may be used for a single function, with a space separating each attribute.

Valid attributes are ISR_BLOCK, ISR_NOBLOCK, ISR_NAKED and ISR_ALIASOF(vect).

vector must be one of the interrupt vector names that are valid for the particular MCU type.

#define ISR_ALIAS(vector, target_vector)

Aliases a given vector to another one in the same manner as the ISR_ALIASOF attribute for the ISR() macro. Unlike the ISR_ALIASOF attribute macro however, this is compatible for all versions of GCC rather than just GCC version 4.2 onwards.

Note: This macro creates a trampoline function for the aliased macro. This will result in a two cycle penalty for the aliased vector compared to the ISR the vector is aliased to, due to the JMP/RJMP opcode used.
Deprecated: For new code, the use of ISR(..., ISR_ALIASOF(...)) is recommended.

Example:

ISR(INT0_vect)
{
    PORTB = 42;
}

ISR_ALIAS(INT1_vect, INT0_vect);

#define ISR_ALIASOF(target_vector)

The ISR is linked to another ISR, specified by the vect parameter. This is compatible with GCC 4.2 and greater only.

Use this attribute in the attributes parameter of the ISR macro. Example:

ISR (INT0_vect)
{
    PORTB = 42;
}

ISR (INT1_vect, ISR_ALIASOF (INT0_vect));

#define ISR_BLOCK

Identical to an ISR with no attributes specified. Global interrupts are initially disabled by the AVR hardware when entering the ISR, without the compiler modifying this state.

Use this attribute in the attributes parameter of the ISR macro.

#define ISR_FLATTEN

The compiler will try to inline all called function into the ISR. This has an effect with GCC 4.6 and newer only.

Use this attribute in the attributes parameter of the ISR macro.

#define ISR_NAKED

ISR is created with no prologue or epilogue code. The user code is responsible for preservation of the machine state including the SREG register, as well as placing a reti() at the end of the interrupt routine.

Use this attribute in the attributes parameter of the ISR macro.

#define ISR_NOBLOCK

ISR runs with global interrupts initially enabled. The interrupt enable flag is activated by the compiler as early as possible within the ISR to ensure minimal processing delay for nested interrupts.

This may be used to create nested ISRs, however care should be taken to avoid stack overflows, or to avoid infinitely entering the ISR for those cases where the AVR hardware does not clear the respective interrupt flag before entering the ISR.

Use this attribute in the attributes parameter of the ISR macro.

#define ISR_NOICF

Avoid identical-code-folding optimization against this ISR. This has an effect with GCC 5 and newer only.

Use this attribute in the attributes parameter of the ISR macro.

#define reti()

Returns from an interrupt routine, enabling global interrupts. This should be the last command executed before leaving an ISR defined with the ISR_NAKED attribute.

This macro actually compiles into a single line of assembly, so there is no function call overhead.

#define sei()

Enables interrupts by setting the global interrupt mask. This function actually compiles into a single line of assembly, so there is no function call overhead. However, the macro also implies a memory barrier which can cause additional loss of optimization.

In order to implement atomic access to multi-byte objects, consider using the macros from <util/atomic.h>, rather than implementing them manually with cli() and sei().

#define SIGNAL(vector)

Introduces an interrupt handler function that runs with global interrupts initially disabled.

This is the same as the ISR macro without optional attributes.

Deprecated: Do not use SIGNAL() in new code. Use ISR() instead.

🌸 Author 🌸

Generated automatically by Doxygen for avr-libc from the source code.

and that's the whole vibe check, bestie 💖 this page was auto-generated by Doxygen for avr-libc from the source code, version 2.1.0, dated Sat Jan 29 2022, and yes — you just read avr_interrupts(3). periodt. 💅✨

📦 where this page comes from