AUEDIT(1)

📦 version 1.9.5, in fedora 43, fedora 44

💖 auedit — the girlies' guide to recording & editing audio 💖

ok so bestie, welcome to auedit from section 1 of the General Commands Manual. she's an X-based, window-oriented queen that lets you record and edit audio files, and honestly? she ate. 🎀

✨ SYNOPSIS ✨

auedit [-audio servername] [-toolkitoption ...] [filename]

🌸 DESCRIPTION 🌸

auedit gives you an X-based, window-oriented interface so you can record and edit audio files. no cap. the editing features you get are:

  • Cutting, copying, pasting, and mixing within a single auedit instance or between multiple auedit instances. multitasking icon behavior 💅
  • Changing the amplitude of an interval.
  • Reversing an interval.
  • Fading in or out an interval.

🦋 AUEDIT AND THE ATHENA WIDGET SET 🦋

auedit uses the X Toolkit Intrinsics and the Athena Widget Set. for more info, go read the Athena Widget Set documentation. iykyk. ✨

👑 SCREEN LAYOUT 👑

when auedit starts up, you get a single window split into several areas:

  • A collection of drop-down menus and command buttons.
  • A volume indicator and control slider.
  • The audio file represented as a wave form. if the audio data has multiple tracks, the tracks show up in ascending order. for stereo data, the convention is left track, then right track.
  • A set of indicators showing the interval start, duration, and end, plus the current position. these indicators are in units of minutes, seconds, and hundredths of seconds.
  • Buttons to play, stop, and pause the audio.
  • Two menus indicating the current file and data formats.
  • Two editable fields holding the current frequency and the audio file comment.

💜 INTERVALS 💜

lots of functions in auedit operate on a range of audio data called an interval. the initial interval encompasses all of the audio data. it's marked inside the wave form by two solid, vertical lines — the left marker is the start of the interval, the right marker is the end. 🫶

to select an interval of audio data, use the mouse to move the interval markers in the wave form. pressing a mouse button in the wave form selects the marker closest to the mouse position, and then you can drag that marker to wherever you want it in the wave form.

not me warning you though — the markers may not cross over each other. periodt.

🔥 PLAYING AN INTERVAL 🔥

to play an interval, click the Play button (the one with the triangle on its side). the audio data delimited by the start and end markers gets played, and a dashed vertical line shows the approximate position of the data currently being played.

to stop playing, click the Stop button (the one containing a solid square). clicking Pause (the button containing two vertical, parallel lines) pauses the playing — click Pause again to resume. the volume slider controls the play volume. the interval is played at the frequency specified by the Frequency field.

heads up bestie: while data is being played, most other functions are disabled. 😭

🎀 THE FILE MENU 🎀

  • New... — Initializes auedit with an empty file. You will be prompted for the number of tracks for the new file.
  • Load... — Loads a file. You will be prompted for the file name.
  • Save — Saves the current file. A backup file will be created by appending a tilde (~) to the current file name. The file format, data format, frequency and comment are used when saving the file.
  • Save as... — Saves the current file under a new name. You will be prompted for the file name. The file format, data format, frequency and comment are used when saving the file.
  • Save interval... — Saves the interval to a file. You will be prompted for a file name. The file format, data format, frequency and comment are used when saving the file.
  • Revert — Discards all changes made since the last save and restores the data to its state following the last save.
  • Exit — Exits auedit. If there have been changes made to the current file that have not been saved, you will be asked if you wish to save them.

💅 THE EDIT MENU 💅

the cut, copy, and paste commands in the edit menu transfer data to and from a selection buffer. this buffer is shared between all instances of auedit. which means… you can cut or copy data from one instance of auedit and paste it into another instance. slay. ✨

the only restriction is that the audio data in both instances must have the same number of tracks.

when transferring data between instances of differing frequencies, the data will be converted to the frequency of the destination. this can be used to change the frequency of the data in a single instance of auedit:

  1. First, cut the data whose frequency you wish to change.
  2. Then change the Frequency field to the desired frequency.
  3. Finally, paste the data back in.

the frequency of the data will be converted to the frequency specified in the Frequency field. iconic behavior, honestly.

  • Cut — Moves the interval to the selection buffer.
  • Copy — Copies the interval to the selection buffer.
  • Paste insert — Inserts the selection buffer at the point marked by the start marker.
  • Paste replace — Replaces the data at the point marked by the start marker with the data from the selection buffer.
  • Paste mix — Mixes the data at the point marked by the start marker with the data from the selection buffer. The mixing function is an average.
  • Undo — Undoes the last operation that modified the audio data. This includes effects operations in addition to editing operations. If the last operation was an Undo then the undo is undone, restoring the data to the state prior to the first undo.

🌈 THE ZOOM MENU 🌈

  • In — Zoom in by a factor of two.
  • Out — Zoom out by a factor of two.
  • Markers — Zoom in to the interval delimited by the start and end markers.
  • Full — Zoom out to display all of the audio data.

⭐ THE EFFECTS MENU ⭐

all operations under the effects menu apply to the current interval. 💖

  • Amplitude... — Scale the amplitude. You will be prompted for the scale. The scale may be non-integral.
  • Max Amplitude — Scales the interval to its maximum amplitude without clipping.
  • Reverse — Reverses the order of the data within the interval.
  • Fade In — Linearly scales the interval using a scale ranging from 0.0 to 1.0.
  • Fade Out — Linearly scales the interval using a scale ranging from 1.0 to 0.0.

🎙️ THE RECORD COMMAND 🎙️

clicking the Record button brings up the record dialog box. the record dialog box consists of:

  • A duration field. This is the maximum duration of the recording in seconds.
  • A frequency field. This is the frequency of the recording in hertz.
  • An input mode toggle button. Clicking this button toggles between line mode and microphone mode.
  • A gain slider. This controls the input gain level.
  • A record toggle button. Clicking this button starts and stops the recording.
  • A monitor toggle button. Clicking this button toggles the record monitoring feature that lets you hear what you're recording.
  • A dismiss command button. Clicking this button stops any current recording and dismisses the record dialog box.

🧚 OPTIONS 🧚

the following options may be used with auedit:

  • -audio servername — This option specifies the Network Audio System server to which auedit should connect.

🌸 SEE ALSO 🌸

nas(1), auconvert(1), X(1)

💀 BUGS 💀

There is no way to manipulate individual tracks.

Copyright 1993, 1994 Network Computing Devices, Inc.

👑 AUTHOR 👑

Greg Renda, Network Computing Devices, Inc.

ok that's the whole page bestie, every last crumb of it. 🫶 this was version 1.9.5 of the page, and it lives in section 1 of the manual (General Commands Manual). go forth and edit some audio, main character. 💅✨🎀

📦 where this page comes from