NVME-OCP-SET-PLP-HEALTH-CHECK-INTERVAL(1)

📦
version 3.2 · 10 versions
, in arch rolling

💅 NVME-OCP-SET-PLP — nvme-ocp-set-plp-health-check-interval 💅

okay bestie, this is the NVME-OCP-SET-PLP page for nvme-ocp-set-plp-health-check-interval — the little command that defines and sets the PLP health check interval. Let’s get into it, no cap. 💖

✨ NAME ✨

nvme-ocp-set-plp-health-check-interval — Define and set PLP health check interval.

🦋 SYNOPSIS 🦋

nvme [<global-options>] ocp set-plp-health-check-interval <device>
                        [--plp_health_interval=<plp_health_interval> | -p <plp_health_interval>]
                        [--save | -s]
                        [--no-uuid | -n]

🌸 DESCRIPTION 🌸

Define Set PLP health check interval. No argument prints current mode.

The <device> parameter is mandatory, bestie — it may be either the NVMe character device (ex: /dev/nvme0) or block device (ex: /dev/nvme0n1).

⚠️ This will only work on OCP compliant devices supporting this feature. Results for any other device are undefined. Like, undefined-undefined. Don’t test it on random hardware and act surprised. 💀

On success it returns 0, error code otherwise.

🎀 OPTIONS 🎀

  • -p <plp_health_interval>, --plp_health_interval=<plp_health_interval> — Set the plp health check interval [31:16].
  • -n, --no-uuid — Do not try to automatically detect UUID index for this command (required for old OCP 1.0 support).
  • -s, --save — Save the attribute so that it persists through all power states and resets.

👑 GLOBAL OPTIONS 👑

The following options are defined at the top-level nvme command and are available to this subcommand:

  • --dry-run — Print the command that would be executed, but do not actually execute it.
  • --no-ioctl-probing — Disable probing for 64-bit IOCTL support.
  • --no-retries — Disable retry logic on transient errors.
  • -o <fmt>, --output-format=<fmt> — Set the reporting format to normal, tabular, 'json, or binary. Only one output format may be used at a time.
  • --output-format-version=<version> — Select the output format version. Version 1 uses the original field naming, while version 2 (default) provides more consistent and script-friendly field names. Other versions are rejected.
  • --quiet — Suppress informational messages. Errors are still reported, and --quiet cancels any --verbose for the library log level.
  • --set-options=<key=value>[,<key=value>...] — Set libnvme library options for this invocation. Supported keys are force-4k, mi-probe-enabled, test-base-dir and test-sysfs-dir.
  • --timeout=<ms> — Set the timeout for the command in milliseconds. infinite or -1 waits without a time limit (0xffffffff).
  • -v, --verbose — Increase the level of detail in the output. May be specified multiple times to further increase verbosity.

These options can also be set as machine-wide defaults in nvme-cli.conf(5). A command-line flag always overrides the file.

🌈 EXAMPLES 🌈

  • Has the program issue a set-plp-health-check-interval to retrieve the 0xC6 set features.
# nvme ocp eol-plp-failure-mode /dev/nvme0

⭐ NVME ⭐

Part of the nvme-user suite.

💖 and that’s the page, bestie! Source/version: NVME-OCP-SET-PLP() — date: not printed in the original, so I’m not making one up. 🫶

📦 where this page comes from