man(1)

💖 NAME 💖

lpc21isp — okay bestie, this is the in-circuit programming (ISP) tool for the NXP(Philips) microcontrollers. yes THAT one. she's serving 💅

✨ SYNOPSIS ✨

lpc21isp [[Options]] [file[ file[] [comport] [baudrate]
         [Oscillator_in_kHz]

lpc21isp [-bin] [-hex] [-term] [-termonly] [-localecho] [-detectonly]
         [-debug0] [-debug3] [-debug5] [-donotstart] [-try<n>] [-wipe]
         [-control] [-controlswap] [-controlinv] [-verify] [-logfile]
         [-halfduplex] [-ADARM] [-PHILIPSARM]

🌸 DESCRIPTION 🌸

So like, lpc21isp is an in-circuit programming (ISP) tool for the NXP(Philips) LPC1100/LPC1300/LPC1700/LPC2000 series ARM7/Cortex-M0/Cortex-M3 microcontrollers. that's the whole vibe, she flashes chips, she's iconic, periodt 👑

🎀 OPTIONS 🎀

• -bin — for uploading binary file 🫶
• -hex — for uploading file in intel hex format (default). this is the one she does if you don't say otherwise, no cap ✨
• -term — for starting terminal after upload
• -termonly — for starting terminal without an upload. just the terminal, nothing else, she's low maintenance like that 💅
• -localecho — for local echo in terminal
• -detectonly — detect only used LPC chiptype (PHILIPSARM only)
• -debug0 — for no debug. silence. nothing. zero thoughts, head empty 🙈
• -debug3 — for progress info only
• -debug5 — for full debug. she is YAPPING. every little detail, main character energy 🔥
• -donotstart — do not start MCU after download
• -try<n> — try n times to synchronise
• -wipe — Erase entire device before upload 🧹
• -control — for controlling RS232 lines for easier booting (Reset = DTR, EnableBootLoader = RTS)
• -controlswap — swap RS232 control lines (Reset = RTS, EnableBootLoader = DTR)
• -controlinv — Invert state of RTS & DTR (0=true/assert/set, 1=false/deassert/clear).
• -verify — Verify the data in Flash after every writes to sector. To detect errors in writing to Flash ROM
• -logfile — for enabling logging of terminal output to lpc21isp.log
• -halfduplex — use halfduplex serial communication (i.e. with K-Line)
• -ADARM — for downloading to an Analog Devices ARM microcontroller ADUC70xx
• -PHILIPSARM — for downloading to a microcontroller from NXP(Philips) LPC13xx/LPC17xx/LPC2000 family (default). yeah she's the default bestie, she's the moment 🌈

and that's the whole page, bestie!! 💖✨🎀🦋🌸💅🫶👑🌈⭐🍓🧚💜

this iconic little manual is version 1.9.4, dated 02 Aug 2012, and it's the lpc21isp man page. she's been slaying since 2012 and she is NOT slowing down. iykyk 💀💅