GFORTRAN(1)

📦
version 15.3.rel2 · 2 versions
, in nixpkgs unstable

💖 gfortran(1) — GNU Fortran compiler 💖

bestie, welcome to the gfortran(1) manual page. This is the GNU Fortran compiler, and we're doing this in installments because it is long. Part one starts right here. 🫶

✨ NAME ✨

gfortran — GNU Fortran compiler. That's the whole vibe. It compiles Fortran, and it's GNU's compiler for it, periodt. 💅

🌟 SYNOPSIS 🌟

Okay so the shape of it is literally:

gfortran [-c|-S|-E]
         [-g] [-pg] [-Olevel]
         [-Wwarn...] [-pedantic]
         [-Idir...] [-Ldir...]
         [-Dmacro[=defn]...] [-Umacro]
         [-foption...]
         [-mmachine-option...]
         [-o outfile] infile...

Only the most useful options are listed here; see below for the remainder. Like, this is the curated fit, not the whole closet. ✨

🦋 DESCRIPTION 🦋

Okay so real talk: the gfortran command supports all the options supported by the gcc command. Only options specific to GNU Fortran are documented here — this page is the Fortran-specific lore, not the entire GCC cinematic universe. 💖

All GCC and GNU Fortran options are accepted both by gfortran and by gcc (as well as any other drivers built at the same time, such as g++), since adding GNU Fortran to the GCC distribution enables acceptance of GNU Fortran options by all of the relevant drivers. Like, the whole friend group shares the aux cord. 🎀

In some cases, options have positive and negative forms; the negative form of -ffoo would be -fno-foo. This manual documents only one of these two forms, whichever one is not the default. So if you only see one form, that's not me being shady — that's literally the documented one, iykyk. 🦋

🎀 OPTIONS 🎀

Here is a summary of all the options specific to GNU Fortran, grouped by type. Explanations are in the following sections. Buckle up, bestie — this is the option mood board. 👑

💜 Fortran Language Options 💜

  • -fall-intrinsics
  • -fallow-argument-mismatch
  • -fallow-invalid-boz
  • -fbackslash
  • -fcray-pointer
  • -fd-lines-as-code
  • -fd-lines-as-comments
  • -fdec
  • -fdec-char-conversions
  • -fdec-structure
  • -fdec-intrinsic-ints
  • -fdec-static
  • -fdec-math
  • -fdec-include
  • -fdec-format-defaults
  • -fdec-blank-format-item
  • -fdefault-double-8
  • -fdefault-integer-8
  • -fdefault-real-8
  • -fdefault-real-10
  • -fdefault-real-16
  • -fdollar-ok
  • -ffixed-line-length-n
  • -ffixed-line-length-none
  • -fpad-source
  • -ffree-form
  • -ffree-line-length-n
  • -ffree-line-length-none
  • -fimplicit-none
  • -finteger-4-integer-8
  • -fmax-identifier-length
  • -fmodule-private
  • -ffixed-form
  • -fno-range-check
  • -fopenacc
  • -fopenmp
  • -fopenmp-allocators
  • -fopenmp-simd
  • -freal-4-real-10
  • -freal-4-real-16
  • -freal-4-real-8
  • -freal-8-real-10
  • -freal-8-real-16
  • -freal-8-real-4
  • -std=std
  • -ftest-forall-temp
  • -funsigned

🌈 Preprocessing Options 🌈

  • -A-question[=answer]
  • -Aquestion=answer
  • -C
  • -CC
  • -Dmacro[=defn]
  • -H
  • -P
  • -Umacro
  • -cpp
  • -dD
  • -dI
  • -dM
  • -dN
  • -dU
  • -fworking-directory
  • -imultilib dir
  • -iprefix file
  • -iquote
  • -isysroot dir
  • -isystem dir
  • -nocpp
  • -nostdinc
  • -undef

😭 Error and Warning Options 😭

  • -Waliasing
  • -Wall
  • -Wampersand
  • -Warray-bounds
  • -Wc-binding-type
  • -Wcharacter-truncation
  • -Wconversion
  • -Wdo-subscript
  • -Wfunction-elimination
  • -Wimplicit-interface
  • -Wimplicit-procedure
  • -Wintrinsic-shadow
  • -Wuse-without-only
  • -Wintrinsics-std
  • -Wline-truncation
  • -Wno-align-commons
  • -Wno-overwrite-recursive
  • -Wno-tabs
  • -Wreal-q-constant
  • -Wsurprising
  • -Wunderflow
  • -Wunused-parameter
  • -Wrealloc-lhs
  • -Wrealloc-lhs-all
  • -Wfrontend-loop-interchange
  • -Wtarget-lifetime
  • -fmax-errors=n
  • -fsyntax-only
  • -pedantic
  • -pedantic-errors

🫶 Debugging Options 🫶

  • -fbacktrace
  • -fdebug-aux-vars
  • -ffpe-trap=list
  • -ffpe-summary=list

🧚 Directory Options 🧚

  • -Idir
  • -Jdir
  • -fintrinsic-modules-path dir
  • -static-libgfortran
  • -static-libquadmath

🍓 Runtime Options 🍓

  • -fconvert=conversion
  • -fmax-subrecord-length=length
  • -frecord-marker=length
  • -fsign-zero

💜 Interoperability Options 💜

  • -fc-prototypes
  • -fc-prototypes-external

👑 Code Generation Options 👑

  • -faggressive-function-elimination
  • -fblas-matmul-limit=n
  • -fbounds-check
  • -ftail-call-workaround
  • -ftail-call-workaround=n
  • -fcheck-array-temporaries
  • -fcheck=<all|array-temps|bits|bounds|do|mem|pointer|recursion>
  • -fcoarray=<none|single|lib>
  • -fexternal-blas
  • -ff2c
  • -ffrontend-loop-interchange
  • -ffrontend-optimize
  • -finit-character=n
  • -finit-integer=n
  • -finit-local-zero
  • -finit-derived
  • -finit-logical=<true|false>
  • -finit-real=<zero|inf|-inf|nan|snan>
  • -finline-intrinsics[=<minloc,maxloc>]
  • -finline-matmul-limit=n
  • -finline-arg-packing
  • -fmax-array-constructor=n
  • -fmax-stack-var-size=n
  • -fno-align-commons
  • -fno-automatic
  • -fno-protect-parens
  • -fno-underscoring
  • -fsecond-underscore
  • -fpack-derived
  • -frealloc-lhs
  • -frecursive
  • -frepack-arrays
  • -fshort-enums
  • -fstack-arrays

🧚 Developer Options 🧚

  • -fdump-fortran-global
  • -fdump-fortran-optimized
  • -fdump-fortran-original
  • -fdump-parse-tree
  • -save-temps

🌸 Options controlling Fortran dialect 🌸

The following options control the details of the Fortran dialect accepted by the compiler. This is where we get into the flavor of the Fortran, bestie. 🍓

  • -ffree-form, -ffixed-form — Specify the layout used by the source file. The free form layout was introduced in Fortran 90. Fixed form was traditionally used in older Fortran programs. When neither option is specified, the source form is determined by the file extension.
  • -fall-intrinsics — This option causes all intrinsic procedures (including the GNU-specific extensions) to be accepted. This can be useful with -std= to force standard compliance but get access to the full range of intrinsics available with gfortran. As a consequence, -Wintrinsics-std is ignored and no user-defined procedure with the same name as any intrinsic is called except when it is explicitly declared EXTERNAL.
  • -fallow-argument-mismatch — Some code contains calls to external procedures with mismatches between the calls and the procedure definition, or with mismatches between different calls. Such code is nonconforming, and is usually flagged with an error. This options degrades the error to a warning that can only be disabled by disabling all warnings via -w. Only a single occurrence per argument is flagged by this warning. -fallow-argument-mismatch is implied by -std=legacy.

Using this option is strongly discouraged. It is possible to provide standard-conforming code that allows different types of arguments by using an explicit interface and TYPE(*).

  • -fallow-invalid-boz — A BOZ literal constant can occur in a limited number of contexts in standard conforming Fortran. This option degrades an error condition to a warning, and allows a BOZ literal constant to appear where the Fortran standard would otherwise prohibit its use.
  • -fd-lines-as-code, -fd-lines-as-comments — Enable special treatment for lines beginning with "d" or "D" in fixed form sources. If the -fd-lines-as-code option is given they are treated as if the first column contained a blank. If the -fd-lines-as-comments option is given, they are treated as comment lines.
  • -fdec — DEC compatibility mode. Enables extensions and other features that mimic the default behavior of older compilers (such as DEC). These features are nonstandard and should be avoided at all costs. For details on GNU Fortran's implementation of these extensions see the full documentation.

Other flags enabled by this switch are: -fdollar-ok -fcray-pointer -fdec-char-conversions -fdec-structure -fdec-intrinsic-ints -fdec-static -fdec-math -fdec-include -fdec-blank-format-item -fdec-format-defaults

If -fd-lines-as-code/-fd-lines-as-comments are unset, then -fdec also sets -fd-lines-as-comments.

  • -fdec-char-conversions — Enable the use of character literals in assignments and DATA statements for non-character variables.
  • -fdec-structure — Enable DEC STRUCTURE and RECORD as well as UNION, MAP, and dot ('.') as a member separator (in addition to '%'). This is provided for compatibility only; Fortran 90 derived types should be used instead where possible.
  • -fdec-intrinsic-ints — Enable B/I/J/K kind variants of existing integer functions (e.g. BIAND, IIAND, JIAND, etc...). For a complete list of intrinsics see Intrinsic Procedures.
  • -fdec-math — Obsolete flag. The purpose of this option was to enable legacy math intrinsics such as COTAN and degree-valued trigonometric functions (e.g. TAND, ATAND, etc...) for compatibility with older code. This option is no longer operable. The trigonometric functions are now either part of Fortran 2023 or GNU extensions.
  • -fdec-static — Enable DEC-style STATIC and AUTOMATIC attributes to explicitly specify the storage of variables and other objects.
  • -fdec-include — Enable parsing of INCLUDE as a statement in addition to parsing it as INCLUDE line. When parsed as INCLUDE statement, INCLUDE does not have to be on a single line and can use line continuations.
  • -fdec-format-defaults — Enable format specifiers F, G and I to be used without width specifiers; default widths are used instead.
  • -fdec-blank-format-item — Enable a blank format item at the end of a format specification i.e. nothing following the final comma.
  • -fdollar-ok — Allow $ as a valid non-first character in a symbol name. Symbols that start with $ are rejected since it is unclear which rules to apply to implicit typing as different vendors implement different rules. Using $ in IMPLICIT statements is also rejected.
  • -fbackslash — Change the interpretation of backslashes in string literals from a single backslash character to "C-style" escape characters. The following combinations are expanded: \a, \b, \f, \n, \r, \t, \v, \\, and \0 to the ASCII characters alert, backspace, form feed, newline, carriage return, horizontal tab, vertical tab, backslash, and NUL, respectively. Additionally, \xnn, \unnnn and \Unnnnnnnn (where each n is a hexadecimal digit) are translated into the Unicode characters corresponding to the specified code points. All other combinations of a character preceded by \ are unexpanded.
  • -fmodule-private — Set the default accessibility of module entities to PRIVATE. Use-associated entities are not accessible unless they are explicitly declared as PUBLIC.
  • -ffixed-line-length-n — Set column after which characters are ignored in typical fixed-form lines in the source file, and, unless -fno-pad-source, through which spaces are assumed (as if padded to that length) after the ends of short fixed-form lines.

Popular values for n include 72 (the standard and the default), 80 (card image), and 132 (corresponding to "extended-source" options in some popular compilers). n may also be none, meaning that the entire line is meaningful and that continued character constants never have implicit spaces appended to them to fill out the line. -ffixed-line-length-0 means the same thing as -ffixed-line-length-none.

  • -fno-pad-source — okay so by default, fixed-form lines have spaces assumed, like as if they got padded to that length, after the ends of short fixed-form lines 💅. This is not done if -ffixed-line-length-0, -ffixed-line-length-none or the -fno-pad-source option is used. With any of those options, continued character constants never have implicit spaces appended to them to fill out the line — no cap 🫶.
  • -ffree-line-length-n — sets the column after which characters are ignored in typical free-form lines in the source file ✨. The default value is 132. n may be none, meaning the entire line is meaningful. -ffree-line-length-0 means the same thing as -ffree-line-length-none 🎀.
  • -fmax-identifier-length=n — specify the maximum allowed identifier length 👑. Typical values are 31 (Fortran 95) and 63 (Fortran 2003 and later). Respect the limit, bestie 💅.
  • -fimplicit-none — specify that no implicit typing is allowed, unless overridden by explicit IMPLICIT statements 🌸. This is the equivalent of adding implicit none to the start of every procedure. Iconic, honestly.
  • -fcray-pointer — enable the Cray pointer extension, which provides C-like pointer functionality 🦋.
  • -fopenacc — enable handling of OpenACC directives !$acc in free-form Fortran and !$acc, c$acc and *$acc in fixed-form Fortran 🔥. When -fopenacc is specified, the compiler generates accelerated code according to the OpenACC Application Programming Interface v2.6 https://www.openacc.org. This option implies -pthread, and thus is only supported on targets that have support for -pthread. The option -fopenacc implies -frecursive. Big parallel energy ⭐.
  • -fopenmp — enable handling of OpenMP directives !$omp in Fortran 💜. It additionally enables the conditional compilation sentinel !$ in Fortran. In fixed source form Fortran, the sentinels can also start with c or *. When -fopenmp is specified, the compiler generates parallel code according to the OpenMP Application Program Interface v4.5 https://www.openmp.org. This option implies -pthread, and thus is only supported on targets that have support for -pthread. -fopenmp implies -fopenmp-simd and -frecursive. Slay, but only on targets with -pthread support 🫶.
  • -fopenmp-allocators — enables handling of allocation, reallocation and deallocation of Fortran allocatable and pointer variables that are allocated using the !$omp allocators and !$omp allocate constructs 🌈. Files containing either directive have to be compiled with this option in addition to -fopenmp. Additionally, all files that might deallocate or reallocate a variable that has been allocated with an OpenMP allocator have to be compiled with this option. This includes intrinsic assignment to allocatable variables when reallocation may occur and deallocation due to either of the following: end of scope, explicit deallocation, intent(out), deallocation of allocatable components etc. Files not changing the allocation status or only for components of a derived type that have not been allocated using those two directives do not need to be compiled with this option. Nor do files that handle such variables after they have been deallocated or allocated by the normal Fortran allocator. Very specific, very important, read the whole thing bestie 😭.
  • -fopenmp-simd — enable handling of OpenMP's simd, declare simd, declare reduction, assume, ordered, scan and loop directive, and of combined or composite directives with simd as constituent with !$omp in Fortran ✨. It additionally enables the conditional compilation sentinel !$ in Fortran. In fixed source form Fortran, the sentinels can also start with c or *. Other OpenMP directives are ignored. Unless -fopenmp is additionally specified, the loop region binds to the current task region, independent of the specified bind clause. So specific, but so valid 💅.
  • -fno-range-check — disable range checking on results of simplification of constant expressions during compilation 🎀. For example, GNU Fortran gives an error at compile time when simplifying a = 1. / 0. With this option, no error is given and a is assigned the value +Infinity. If an expression evaluates to a value outside of the relevant range of ["-HUGE()":"HUGE()"], then the expression is replaced by -Inf or +Inf as appropriate. Similarly, DATA i/Z'FFFFFFFF'/ results in an integer overflow on most systems, but with -fno-range-check the value "wraps around" and i is initialized to -1 instead. Chaos math, but make it intentional 💀.
  • -fdefault-integer-8 — set the default integer and logical types to an 8 byte wide type 👑. This option also affects the kind of integer constants like 42. Unlike -finteger-4-integer-8, it does not promote variables with explicit kind declaration. Defaults got upgraded, no notes.
  • -fdefault-real-8 — set the default real type to an 8 byte wide type 🌸. This option also affects the kind of non-double real constants like 1.0. This option promotes the default width of DOUBLE PRECISION and double real constants like 1.d0 to 16 bytes if possible. If -fdefault-double-8 is given along with -fdefault-real-8, DOUBLE PRECISION and double real constants are not promoted. Unlike -freal-4-real-8, -fdefault-real-8 does not promote variables with explicit kind declarations. It’s giving “default but make it thicc” 💖.
  • -fdefault-real-10 — set the default real type to a 10 byte wide type 🦋. This option also affects the kind of non-double real constants like 1.0. This option promotes the default width of DOUBLE PRECISION and double real constants like 1.d0 to 16 bytes if possible. If -fdefault-double-8 is given along with -fdefault-real-10, DOUBLE PRECISION and double real constants are not promoted. Unlike -freal-4-real-10, -fdefault-real-10 does not promote variables with explicit kind declarations. Ten byte real default, she’s specific 💅.
  • -fdefault-real-16 — set the default real type to a 16 byte wide type 🔥. This option also affects the kind of non-double real constants like 1.0. This option promotes the default width of DOUBLE PRECISION and double real constants like 1.d0 to 16 bytes if possible. If -fdefault-double-8 is given along with -fdefault-real-16, DOUBLE PRECISION and double real constants are not promoted. Unlike -freal-4-real-16, -fdefault-real-16 does not promote variables with explicit kind declarations. Maximum default real width, main character energy ⭐.
  • -fdefault-double-8 — set the DOUBLE PRECISION type and double real constants like 1.d0 to an 8 byte wide type 🎀. Do nothing if this is already the default. This option prevents -fdefault-real-8, -fdefault-real-10, and -fdefault-real-16 from promoting DOUBLE PRECISION and double real constants like 1.d0 to 16 bytes. It’s the “actually keep double at 8 bytes” button 🫶.
  • -finteger-4-integer-8 — promote all INTEGER(KIND=4) entities to INTEGER(KIND=8) entities 🌈. If KIND=8 is unavailable, then an error is issued. This option should be used with care and may not be suitable for your codes. Areas of possible concern include calls to external procedures, alignment in EQUIVALENCE and/or COMMON, generic interfaces, BOZ literal constant conversion, and I/O. Inspection of the intermediate representation of the translated Fortran code, produced by -fdump-tree-original, is suggested. This one can be a lot, so proceed carefully, bestie 😭.
  • -freal-4-real-8, -freal-4-real-10, -freal-4-real-16, -freal-8-real-4, -freal-8-real-10, -freal-8-real-16 — promote all REAL(KIND=M) entities to REAL(KIND=N) entities 💜. If REAL(KIND=N) is unavailable, then an error is issued. The -freal-4- flags also affect the default real kind and the -freal-8- flags also the double-precision real kind. All other real-kind types are unaffected by this option. The promotion is also applied to real literal constants of default and double-precision kind and a specified kind number of 4 or 8, respectively. However, -fdefault-real-8, -fdefault-real-10, -fdefault-real-10, and -fdefault-double-8 take precedence for the default and double-precision real kinds, both for real literal constants and for declarations without a kind number. Note that for REAL(KIND=KIND(1.0)) the literal may get promoted and then the result may get promoted again. These options should be used with care and may not be suitable for your codes. Areas of possible concern include calls to external procedures, alignment in EQUIVALENCE and/or COMMON, generic interfaces, BOZ literal constant conversion, and I/O and calls to intrinsic procedures when passing a value to the kind= dummy argument. Inspection of the intermediate representation of the translated Fortran code, produced by -fdump-fortran-original or -fdump-tree-original, is suggested. So many kinds, so little time 💀.
  • -std=std — specify the standard to which the program is expected to conform, which may be one of f95, f2003, f2008, f2018, f2023, gnu, or legacy 👑. The default value for std is gnu, which specifies a superset of the latest Fortran standard that includes all of the extensions supported by GNU Fortran, although warnings are given for obsolete extensions not recommended for use in new code. The legacy value is equivalent but without the warnings for obsolete extensions, and may be useful for old nonstandard programs. The f95, f2003, f2008, f2018, and f2023 values specify strict conformance to the Fortran 95, Fortran 2003, Fortran 2008, Fortran 2018 and Fortran 2023 standards, respectively; errors are given for all extensions beyond the relevant language standard, and warnings are given for the Fortran 77 features that are permitted but obsolescent in later standards. The deprecated option -std=f2008ts acts as an alias for -std=f2018. It is only present for backwards compatibility with earlier gfortran versions and should not be used any more. -std=f202y acts as an alias for -std=f2023 and enables proposed features for testing Fortran 202y. As the Fortran 202y standard develops, implementation might change or the experimental new features might be removed. Standards era, pick your fighter 🌸.
  • -ftest-forall-temp — enhance test coverage by forcing most forall assignments to use temporary 🎀. Testing arc, no notes.
  • -funsigned — allow the experimental unsigned extension ⭐. Experimental means experimental, bestie, don’t forget 🫶.

🌸 Enable and customize preprocessing 🌸

Okay so bestie, plot twist: lots of Fortran compilers (GNU Fortran included 😌) will happily pass your source code through a C preprocessor — CPP, sometimes also called the Fortran preprocessor or FPP — which is how you get conditional compilation. In GNU Fortran's case it's the GNU C Preprocessor, running in traditional mode. Periodt.

On systems with case-preserving file names, the preprocessor gets auto-invoked whenever your filename extension is .F, .FOR, .FTN, .fpp, .FPP, .F90, .F95, .F03 or .F08. Wanna manually invoke the preprocessor on literally any file? Use -cpp. Wanna turn preprocessing off for the files where it'd normally run automatically? Use -nocpp. Easy 💅

Now this is important: if a preprocessed file includes another file with the Fortran INCLUDE statement, the included file is not preprocessed. If you do want included files preprocessed, use the equivalent preprocessor statement #include instead.

When GNU Fortran invokes the preprocessor, __GFORTRAN__ is defined. And the macros __GNUC__, __GNUC_MINOR__ and __GNUC_PATCHLEVEL__ are your vibe check for figuring out the version of the compiler. See Top,,Overview,cpp,The C Preprocessor for the details, iykyk.

GNU Fortran also supports a bunch of INTEGER and REAL kind types on top of the kind types the Fortran standard requires — and no cap, the availability of any given kind type is architecture dependent 🙈. Here are the predefined preprocessor macros you can use to conditionally include code for these extra kind types: __GFC_INT_1__, __GFC_INT_2__, __GFC_INT_8__, __GFC_INT_16__, __GFC_REAL_10__, and __GFC_REAL_16__. Iconic.

While CPP is the de facto standard for preprocessing Fortran code, Part 3 of the Fortran 95 standard (ISO/IEC 1539-3:1998) defines Conditional Compilation, which is not widely used and not directly supported by the GNU Fortran compiler. So like… don't come for CPP, she's the main character here 🎀

The following options control preprocessing of Fortran code:

  • -cpp, -nocpp — -cpp enables preprocessing ✨ The preprocessor is automatically invoked if the file extension is .fpp, .FPP, .F, .FOR, .FTN, .F90, .F95, .F03 or .F08. Use this option to manually enable preprocessing of any kind of Fortran file. To disable preprocessing of files with any of the above listed extensions, use the negative form: -nocpp. Heads up: the preprocessor is run in traditional mode. Any restrictions of the file format — especially the limits on line length — apply for preprocessed output as well, so it might be advisable to use the -ffree-line-length-none or -ffixed-line-length-none options 🫶
  • -dM — Instead of the normal output, generate a list of #define directives for all the macros defined during the execution of the preprocessor, including predefined macros. This gives you a way of finding out what is predefined in your version of the preprocessor. Assuming you have no file foo.f90, the command
touch foo.f90; gfortran -cpp -E -dM foo.f90

shows all the predefined macros. Literally so useful 💖

  • -dD — Like -dM except in two respects: it does not include the predefined macros, and it outputs both the #define directives and the result of preprocessing. Both kinds of output go to the standard output file.
  • -dN — Like -dD, but emit only the macro names, not their expansions.
  • -dU — Like dD except that only macros that are expanded, or whose definedness is tested in preprocessor directives, are output; the output is delayed until the use or test of the macro; and #undef directives are also output for macros tested but undefined at the time.
  • -dI — Output #include directives in addition to the result of preprocessing.
  • -fworking-directory — Enable generation of linemarkers in the preprocessor output that let the compiler know the current working directory at the time of preprocessing. When this option is enabled, the preprocessor emits, after the initial linemarker, a second linemarker with the current working directory followed by two slashes. GCC uses this directory, when it is present in the preprocessed input, as the directory emitted as the current working directory in some debugging information formats. This option is implicitly enabled if debugging information is enabled, but this can be inhibited with the negated form -fno-working-directory. If the -P flag is present in the command line, this option has no effect, since no #line directives are emitted whatsoever.
  • -idirafter dir — Search dir for include files, but do it after all directories specified with -I and the standard system directories have been exhausted. dir is treated as a system include directory. If dir begins with =, then the = is replaced by the sysroot prefix; see --sysroot and -isysroot.
  • -imultilib dir — Use dir as a subdirectory of the directory containing target-specific C++ headers.
  • -iprefix prefix — Specify prefix as the prefix for subsequent -iwithprefix options. If the prefix represents a directory, you should include the final /. Don't forget it bestie 😭
  • -isysroot dir — This option is like the --sysroot option, but applies only to header files. See the --sysroot option for more information.
  • -iquote dir — Search dir only for header files requested with #include "file"; they are not searched for #include <file>, before all directories specified by -I and before the standard system directories. If dir begins with =, then the = is replaced by the sysroot prefix; see --sysroot and -isysroot.
  • -isystem dir — Search dir for header files, after all directories specified by -I but before the standard system directories. Mark it as a system directory, so that it gets the same special treatment as is applied to the standard system directories. If dir begins with =, then the = is replaced by the sysroot prefix; see --sysroot and -isysroot.
  • -nostdinc — Do not search the standard system directories for header files. Only the directories you have specified with -I options (and the directory of the current file, if appropriate) are searched.
  • -undef — Do not predefine any system-specific or GCC-specific macros. The standard predefined macros remain defined.
  • -Apredicate=answer — Make an assertion with the predicate predicate and answer answer. This form is preferred to the older form -A predicate(answer), which is still supported, because it does not use shell special characters.
  • -A-predicate=answer — Cancel an assertion with the predicate predicate and answer answer.
  • -C — Do not discard comments. All comments are passed through to the output file, except for comments in processed directives, which are deleted along with the directive. You should be prepared for side effects when using -C; it causes the preprocessor to treat comments as tokens in their own right. For example, comments appearing at the start of what would be a directive line have the effect of turning that line into an ordinary source line, since the first token on the line is no longer a #.
⚠️ Warning: this currently handles C-Style comments only. The preprocessor does not yet recognize Fortran-style comments. 💀
  • -CC — Do not discard comments, including during macro expansion. This is like -C, except that comments contained within macros are also passed through to the output file where the macro is expanded. In addition to the side-effects of the -C option, the -CC option causes all C++-style comments inside a macro to be converted to C-style comments. This is to prevent later use of that macro from inadvertently commenting out the remainder of the source line. The -CC option is generally used to support lint comments.
⚠️ Warning: this currently handles C- and C++-Style comments only. The preprocessor does not yet recognize Fortran-style comments. 😭
  • -Dname — Predefine name as a macro, with definition 1.
  • -Dname=definition — The contents of definition are tokenized and processed as if they appeared during translation phase three in a #define directive. In particular, the definition is truncated by embedded newline characters. If you are invoking the preprocessor from a shell or shell-like program you may need to use the shell's quoting syntax to protect characters such as spaces that have a meaning in the shell syntax. If you wish to define a function-like macro on the command line, write its argument list with surrounding parentheses before the equals sign (if any). Parentheses are meaningful to most shells, so you need to quote the option. With sh and csh, -D'name(args...)=definition' works 🐚 Also important: -D and -U options are processed in the order they are given on the command line. All -imacros file and -include file options are processed after all -D and -U options.
  • -H — Print the name of each header file used, in addition to other normal activities. Each name is indented to show how deep in the #include stack it is. Nested vibes 🌸
  • -P — Inhibit generation of linemarkers in the output from the preprocessor. This might be useful when running the preprocessor on something that is not C code, and is sent to a program that might be confused by the linemarkers.
  • -Uname — Cancel any previous definition of name, either built in or provided with a -D option.

🚨 Options to request or suppress errors and warnings 🚨

Okay so real talk. Errors are diagnostic messages that report that the GNU Fortran compiler cannot compile the relevant piece of source code. The compiler continues to process the program in an attempt to report further errors to aid in debugging, but does not produce any compiled output. So like… she's still trying, but nothing's coming out 💀

Warnings are diagnostic messages that report constructions that are not inherently erroneous but that are risky or suggest there is likely to be a bug in the program. Unless -Werror is specified, they do not prevent compilation of the program. Warnings are giving "not a red flag but definitely a yellow one" 🟡

You can request many specific warnings with options beginning -W, for example -Wimplicit to request warnings on implicit declarations. Each of these specific warning options also has a negative form beginning -Wno- to turn off warnings; for example -Wno-implicit. This manual lists only one of the two forms, whichever is not the default. Ngl that's kind of efficient of her 👑

These options control the amount and kinds of errors and warnings produced by GNU Fortran:

  • -fmax-errors=n — Limits the maximum number of error messages to n, at which point GNU Fortran bails out rather than attempting to continue processing the source code. If n is 0, there is no limit on the number of error messages produced. Zero means go off forever, basically ✨
  • -fsyntax-only — bestie this one is literally just a vibe check for your code 👀 it checks for syntax errors but does not actually compile anything. It does generate module files for each module in the code, but no other output file. So you get the receipts, not the binary.
  • -Wpedantic, -pedantic — issues warnings whenever you use extensions to Fortran. And -pedantic also applies to C-language constructs where they show up in GNU Fortran source files, like using \e in a character constant inside a directive like "#include".

Valid Fortran programs should compile properly with or without this option. But here's the tea: without this option, certain GNU extensions and traditional Fortran features are supported too. With it, many of them get rejected. 💅

Some users try to use -pedantic to check programs for conformance. They soon find out it does not do quite what they want — it finds some nonstandard practices, but not all. Still, improvements to GNU Fortran in this area are welcome 🫶.

This should be used in conjunction with -std=f95, -std=f2003, -std=f2008, -std=f2018 or -std=f2023.

  • -pedantic-errors — same energy as -pedantic, except errors are produced rather than warnings. So it's giving strict-strict. 😤
  • -Wall — turns on the commonly used warning options about usage that we recommend avoiding and that we believe are easy to avoid. Currently this includes -Waliasing, -Wampersand, -Wconversion, -Wsurprising, -Wc-binding-type, -Wintrinsics-std, -Wtabs, -Wintrinsic-shadow, -Wline-truncation, -Wtarget-lifetime, -Winteger-division, -Wreal-q-constant, -Wunused and -Wundefined-do-loop. It's the starter pack of warnings ✨
  • -Waliasing — warns about possible aliasing of dummy arguments. Specifically, it warns if the same actual argument is associated with a dummy argument with INTENT(IN) and a dummy argument with INTENT(OUT) in a call with an explicit interface.

The following example triggers the warning, no cap:

          interface
            subroutine bar(a,b)
              integer, intent(in) :: a
              integer, intent(out) :: b
            end subroutine
          end interface
          integer :: a

          call bar(a,a)
  • -Wampersand — warns about a missing ampersand in continued character constants. The warning is given with -Wampersand, -pedantic, -std=f95, -std=f2003, -std=f2008, -std=f2018 and -std=f2023. Note: with no ampersand given in a continued character constant, GNU Fortran assumes continuation at the first non-comment, non-whitespace character after the ampersand that initiated the continuation. iykyk 🌀
  • -Warray-temporaries — warns about array temporaries generated by the compiler. The info this warning gives you is sometimes useful in optimization, so you can avoid such temporaries. lowkey a performance girly 💅
  • -Wc-binding-type — warns if the a variable might not be C interoperable. In particular, it warns if the variable has been declared using an intrinsic type with default kind instead of using a kind parameter defined for C interoperability in the intrinsic ISO_C_Binding module. This option is implied by -Wall.
  • -Wcharacter-truncation — warns when a character assignment truncates the assigned string. 😭 your string got cut off bestie
  • -Wline-truncation — warns when a source code line is truncated. This option is implied by -Wall. For free-form source code, the default is -Werror=line-truncation such that truncations are reported as error. ⚠️
  • -Wconversion — warns about implicit conversions that are likely to change the value of the expression after conversion. Implied by -Wall.
  • -Wconversion-extra — warns about implicit conversions between different types and kinds. This option does not imply -Wconversion (sneaky little detail, don't forget it 🎀).
  • -Wexternal-argument-mismatch — warns about argument mismatches for dummy external procedures. This is implied by -fc-prototypes-external because generation of a valid C23 interface is not possible in such a case. Also implied by -Wall.
  • -Wextra — enables some warning options for usages of language features that may be problematic. Currently includes -Wcompare-reals, -Wunused-parameter and -Wdo-subscript. Extra ✨ literally in the name.
  • -Wfrontend-loop-interchange — warns when using -ffrontend-loop-interchange for performing loop interchanges.
  • -Wimplicit-interface — warns if a procedure is called without an explicit interface. Note: this only checks that an explicit interface is present. It does not check that the declared interfaces are consistent across program units. 🙈
  • -Wimplicit-procedure — warns if a procedure is called that has neither an explicit interface nor has been declared as EXTERNAL.
  • -Winteger-division — warns if a constant integer division truncates its result. As an example, 3/5 evaluates to 0. the math is mathing but like... sadly 💀
  • -Wintrinsics-std — warns if gfortran finds a procedure named like an intrinsic not available in the currently selected standard (with -std) and treats it as an EXTERNAL procedure because of this. -fall-intrinsics can be used to never trigger this behavior and always link to the intrinsic regardless of the selected standard.
  • -Wno-overwrite-recursive — do not warn when -fno-automatic is used with -frecursive. Recursion is broken if the relevant local variables do not have the attribute AUTOMATIC explicitly declared. This option can be used to suppress the warning when it is known that recursion is not broken. Useful for build environments that use -Werror. 🛠️
  • -Wreal-q-constant — produces a warning if a real-literal-constant contains a "q" exponent-letter.
  • -Wsurprising — produces a warning when "suspicious" code constructs are encountered. While technically legal, these usually indicate that an error has been made. 🕵️‍♀️

This currently produces a warning under the following circumstances:

  • An INTEGER-typed SELECT CASE construct has a CASE that can never be matched as its lower value is greater than its upper value.
  • A LOGICAL-typed SELECT CASE construct has three CASE statements.
  • A TRANSFER specifies a source that is shorter than the destination.
  • The type of a function result is declared more than once with the same type. If -pedantic or standard-conforming mode is enabled, this is an error.
  • A CHARACTER variable is declared with negative length.
  • With -fopenmp, for fixed-form source code, when an omx vendor-extension sentinel is encountered. (The equivalent ompx, used in free-form source code, is diagnosed by default.)
  • -Wtabs — by default, tabs are accepted as whitespace, but tabs are not members of the Fortran Character Set. For continuation lines, a tab followed by a digit between 1 and 9 is supported. -Wtabs causes a warning to be issued if a tab is encountered. Note, -Wtabs is active for -pedantic, -std=f95, -std=f2003, -std=f2008, -std=f2018, -std=f2023 and -Wall.
  • -Wundefined-do-loop — warns if a DO loop with step either 1 or -1 yields an underflow or an overflow during iteration of an induction variable of the loop. This option is implied by -Wall.
  • -Wunderflow — produces a warning when numerical constant expressions that yield an underflow are encountered during compilation. Enabled by default. 💧
  • -Wintrinsic-shadow — warns if a user-defined procedure or module procedure has the same name as an intrinsic; in this case, an explicit interface or EXTERNAL or INTRINSIC declaration might be needed to get calls later resolved to the desired intrinsic/procedure. This option is implied by -Wall.
  • -Wuse-without-only — warns if a USE statement has no ONLY qualifier and thus implicitly imports all public entities of the used module. not the ONLY-less behavior 😬
  • -Wunused-dummy-argument — warns about unused dummy arguments. This option is implied by -Wall.
  • -Wunused-parameter — contrary to gcc's meaning of -Wunused-parameter, gfortran's implementation of this option does not warn about unused dummy arguments (see -Wunused-dummy-argument), but about unused PARAMETER values. -Wunused-parameter is implied by -Wextra if also -Wunused or -Wall is used. plot twist 🫢
  • -Walign-commons — by default, gfortran warns about any occasion of variables being padded for proper alignment inside a COMMON block. This warning can be turned off via -Wno-align-commons. See also -falign-commons.
  • -Wfunction-elimination — warns if any calls to impure functions are eliminated by the optimizations enabled by the -ffrontend-optimize option. This option is implied by -Wextra.
  • -Wrealloc-lhs — warns when the compiler might insert code for allocation or reallocation of an allocatable array variable of intrinsic type in intrinsic assignments. In hot loops, the Fortran 2003 reallocation feature may reduce the performance. If the array is already allocated with the correct shape, consider using a whole-array array-spec (e.g. (:,:,:)) for the variable on the left-hand side to prevent the reallocation check. Note that in some cases the warning is shown, even if the compiler optimizes reallocation checks away. For instance, when the right-hand side contains the same variable multiplied by a scalar. See also -frealloc-lhs. 🔥
  • -Wrealloc-lhs-all — warns when the compiler inserts code for allocation or reallocation of an allocatable variable; this includes scalars and derived types.
  • -Wcompare-reals — warns when comparing real or complex types for equality or inequality. This option is implied by -Wextra.
  • -Wtarget-lifetime — warns if the pointer in a pointer assignment might be longer than its target. This option is implied by -Wall.
  • -Wzerotrip — warns if a DO loop is known to execute zero times at compile time. This option is implied by -Wall.
  • -Wdo-subscript — warns if an array subscript inside a DO loop could lead to an out-of-bounds access even if the compiler cannot prove that the statement is actually executed, in cases like
          real a(3)
          do i=1,4
            if (condition(i)) then
              a(i) = 1.2
            end if
          end do

This option is implied by -Wextra.

  • -Werror — turns all warnings into errors. every warning. all of them. no mercy 😈

Some of these have no effect when compiling programs written in Fortran.

🐛 Options for debugging your program 🐛

GNU Fortran has various special options that are used for debugging your program. grab your magnifying glass bestie 🔍✨

  • -fdebug-aux-vars — renames the internal variables that the gfortran front end creates and makes them visible to a debugger 💅 the internal variable names then start with uppercase letters followed by an underscore. Super useful for debugging the compiler's own code generation together with -fdump-tree-original, and for turning on debugging of the executable program with -g or -ggdb3. iykyk 🔍
  • *-ffpe-trap=list* — bestie, this one sets which floating point exception traps are enabled. On most systems, if a floating point exception happens and the trap for that exception is on, a SIGFPE signal gets sent and the program aborts, producing a core file that's genuinely useful for debugging 💀 list is a (possibly empty) comma-separated list of either none (to clear the whole set of exceptions to be trapped), or of these exceptions:
    • invalid — invalid floating point operation, like SQRT(-1.0) 🙈
    • zero — division by zero
    • overflow — overflow in a floating point operation
    • underflow — underflow in a floating point operation
    • inexact — loss of precision during operation
    • denormal — operation performed on a denormal value

The first five correspond to the five IEEE 754 exceptions, whereas the last one (denormal) is not part of the IEEE 754 standard but is available on some common architectures such as x86.

The first three (invalid, zero, and overflow) often indicate serious errors, so unless the program has provisions for dealing with these exceptions, enabling traps for these three is probably a good idea 👑

If you use the option more than once on the command line, the lists are joined: -ffpe-trap=list1 -ffpe-trap=list2 is equivalent to -ffpe-trap=list1,list2.

Heads up: once an exception is enabled it can't be disabled (there's no negative form), except by clearing all traps with none. No take-backs 🌸

Also, many (if not most) floating point operations incur loss of precision from rounding, so -ffpe-trap=inexact is likely to be uninteresting in practice. Like, you will get spammed, no cap 😭

By default no exception traps are enabled.

  • *-ffpe-summary=list* — tells the compiler which floating-point exceptions should have their flag status printed to ERROR_UNIT when STOP and ERROR STOP are invoked. list can be none, all, or a comma-separated list of these exceptions: invalid, zero, overflow, underflow, inexact and denormal (peep -ffpe-trap for a description of the exceptions 🫶).

If the option shows up more than once on the command line, only the last one is used.

By default, a summary for all exceptions but inexact is shown.

  • -fno-backtrace — when a serious runtime error is encountered or a deadly signal is emitted (segmentation fault, illegal instruction, bus error, floating-point exception, and the other POSIX signals that have the action core), the Fortran runtime library tries to output a backtrace of the error. -fno-backtrace disables that backtrace generation. Note it only has influence for compilation of the Fortran main program 💜

These options affect how GNU Fortran searches for files specified by the INCLUDE directive, and where it searches for previously compiled modules.

They also affect the search paths used by cpp when it's used to preprocess Fortran source ✨

  • *-Idir* — these affect interpretation of the INCLUDE directive (as well as the #include directive of the cpp preprocessor).

Also note that the general behavior of -I and INCLUDE is pretty much the same as -I with #include in the cpp preprocessor, with regard to looking for header.gcc files and other such things 👀

This path is also used to search for .mod files when previously compiled modules are required by a USE statement.

  • *-Jdir* — this one specifies where to put .mod files for compiled modules. It's also added to the list of directories searched by a USE statement.

The default is the current directory 🎀

  • *-fintrinsic-modules-path *dir — specifies the location of pre-compiled intrinsic modules, if they're not in the default location the compiler expects.

🔗 Influencing the linking step 🔗

These options come into play when the compiler links object files into an executable output file. They're meaningless if the compiler isn't doing a link step 💀

  • -static-libgfortran — on systems that provide libgfortran as both a shared and a static library, this forces the use of the static version. If no shared version of libgfortran was built when the compiler was configured, this option has no effect.
  • -static-libquadmath — same energy for libquadmath: on systems that provide it as a shared and a static library, this forces the static version. If no shared version of libquadmath was built when the compiler was configured, this option has no effect.
Real talk: the libquadmath runtime library is licensed under the GNU Lesser General Public License (LGPL), and linking it statically introduces requirements when redistributing the resulting binaries. Read up before you ship, bestie 📜

⚡ Influencing runtime behavior ⚡

These options affect the runtime behavior of programs compiled with GNU Fortran 🌈

  • *-fconvert=conversion* — specifies the representation of data for unformatted files. Valid values for conversion on most systems are:
    • native — the default ✨
    • swap — swap between big- and little-endian
    • big-endian — use big-endian representation for unformatted files
    • little-endian — use little-endian representation for unformatted files

On POWER systems that support -mabi=ieeelongdouble, there are additional options, and they can be combined with the others using commas. Those are:

  • -fconvert=r16_ieee — use IEEE 128-bit format for REAL(KIND=16).
  • -fconvert=r16_ibm — use IBM long double format for REAL(KIND=16).

This option has an effect only when used in the main program 🫶 the CONVERT specifier and the GFORTRAN_CONVERT_UNIT environment variable override the default specified by -fconvert.

  • *-frecord-marker=length* — specifies the length of record markers for unformatted files. Valid values for length are 4 and 8. Default is 4 ⭐ this is different from previous versions of gfortran, which specified a default record marker length of 8 on most systems. If you want to read or write files compatible with earlier versions of gfortran, use -frecord-marker=8.
  • *-fmax-subrecord-length=length* — specifies the maximum length for a subrecord. The maximum permitted value for length is 2147483639, which is also the default. Only really useful for use by the gfortran testsuite 🧪
  • -fsign-zero — when enabled, floating point numbers of value zero with the sign bit set are written as negative numbers in formatted output and treated as negative in the SIGN intrinsic. -fno-sign-zero does not print the negative sign of zero values (or values rounded to zero for I/O) and regards zero as a positive number in the SIGN intrinsic, for compatibility with Fortran 77. The default is -fsign-zero 💅

🛠️ GNU Fortran Developer Options 🛠️

GNU Fortran has various special options that are used for debugging the GNU Fortran compiler itself, no cap 🔍

  • -fdump-fortran-global — outputs a list of the global identifiers after translating into middle-end representation. Mostly useful for debugging the GNU Fortran compiler itself. The output generated by this option might change between releases. This option may also generate internal compiler errors for features that have only recently been added 👀
  • -fdump-fortran-optimized — outputs the parse tree after front-end optimization. Mostly useful for debugging the GNU Fortran compiler itself. The output generated by this option might change between releases. This option may also generate internal compiler errors for features that have only recently been added.
  • -fdump-fortran-original — outputs the internal parse tree after translating the source program into internal representation. Mostly useful for debugging the GNU Fortran compiler itself. The output generated by this option might change between releases. This option may also generate internal compiler errors for features that have only recently been added.
  • -fdump-parse-tree — outputs the internal parse tree after translating the source program into internal representation. Mostly useful for debugging the GNU Fortran compiler itself. The output generated by this option might change between releases. This option may also generate internal compiler errors for features that have only recently been added.
This option is deprecated; use -fdump-fortran-original instead 💀
  • -save-temps — stores the usual "temporary" intermediate files permanently, naming them as auxiliary output files, as specified described under GCC -dumpbase and -dumpdir.
gfortran -save-temps -c foo.F90

preprocesses input file foo.F90 to foo.fii, compiles to an intermediate foo.s, and then assembles to the (implied) output file foo.o, whereas:

gfortran -save-temps -S foo.F

saves the preprocessor output in foo.fi, and then compiles to the (implied) output file foo.s ✨

🎀 Options for code generation conventions 🎀

These machine-independent options control the interface conventions used in code generation.

Most of them have both positive and negative forms; the negative form of -ffoo would be -fno-foo. In the table below, only one of the forms is listed — the one that is not the default. You can figure out the other form by either removing no- or adding it 💅

  • -fno-automatic — treats each program unit (except those marked as RECURSIVE) as if the SAVE statement were specified for every local variable and array referenced in it. Does not affect common blocks. (Some Fortran compilers provide this option under the name -static or -save.) The default, which is -fautomatic, uses the stack for local variables smaller than the value given by -fmax-stack-var-size. Use the option -frecursive to use no static memory.

Local variables or arrays having an explicit SAVE attribute are silently ignored unless the -pedantic option is added 🙈

  • -ff2c — generates code designed to be compatible with code generated by g77 and f2c.

So like, real talk: those calling conventions that g77 uses (originally cooked up in f2c) are built on two rules — functions that return type default REAL actually have to return the C type double, and functions that return type COMPLEX hand their values back through an extra argument in the calling sequence that points at where the return value should be stored. Under the default GNU calling conventions though? Those functions just return their results like they would in GNU C — default REAL functions return the C type float, and COMPLEX functions return the GNU C type complex. Also, this option implies the -fsecond-underscore option, unless -fno-second-underscore is explicitly requested. 🫶

This does not affect the generation of code that interfaces with the libgfortran library.

Caution: bestie, do not mix Fortran code compiled with -ff2c with code compiled under the default -fno-f2c calling conventions. Mixing COMPLEX or default REAL function calls between program parts built with different calling conventions will break at execution time. Like, catastrophic break. 💀
Caution: this also breaks code that passes intrinsic functions of type default REAL or COMPLEX as actual arguments, because the library implementations use the -fno-f2c calling conventions.
  • -fno-underscoring — do not transform names of entities specified in the Fortran source file by appending underscores to them. ✨

With -funderscoring in effect, GNU Fortran appends one underscore to external names. This is done to ensure compatibility with code produced by many UNIX Fortran compilers. Heads up: this does not apply to names declared with C binding, or within a module.

Caution: the default behavior of GNU Fortran is incompatible with f2c and g77, so please use the -ff2c option if you want object files compiled with GNU Fortran to be compatible with object code created with these tools. 🙈

Use of -fno-underscoring is not recommended unless you're out here experimenting with issues such as integration of GNU Fortran into existing system environments (vis-à-vis existing libraries, tools, and so on).

For example, with -funderscoring, and assuming that j() and max_count() are external functions while my_var and lvar are local variables, a Fortran statement like

I = J() + MAX_COUNT (MY_VAR, LVAR)

is implemented as something akin to the C code:

i = j_() + max_count_(&my_var, &lvar);

With -fno-underscoring, the same statement is implemented as:

i = j() + max_count(&my_var, &lvar);

Use of -fno-underscoring allows direct specification of user-defined names while debugging and when interfacing GNU Fortran code with other languages. 🎀

Note that just because the names match does not mean that the interface implemented by GNU Fortran for an external name matches the interface implemented by some other language for that same name. Like, getting code produced by GNU Fortran to link to code produced by some other compiler using this or any other method can be only a small part of the overall solution — getting the code generated by both compilers to agree on issues other than naming can require significant effort, and, unlike naming disagreements, linkers normally cannot detect disagreements in these other areas. 😭

Also, note that with -fno-underscoring, the lack of appended underscores introduces the very real possibility that a user-defined external name conflicts with a name in a system library, which could make finding unresolved-reference bugs quite difficult in some cases — they might occur at program run time, and show up only as buggy behavior at run time. sneaky ones, fr.

Also note that declaring symbols as bind(C) is a more robust way to interface with code written in other languages or compiled with different Fortran compilers than the command-line options documented in this section. 💅

  • -fsecond-underscore — by default, GNU Fortran appends an underscore to external names. If this option is used, GNU Fortran appends two underscores to names with underscores and one underscore to names with no underscores.

For example, an external name such as MAX_COUNT is implemented as a reference to the link-time external symbol max_count__, instead of max_count_. This is required for compatibility with g77 and f2c, and is implied by use of the -ff2c option. ⭐

This option has no effect if -fno-underscoring is in effect. It is implied by the -ff2c option.

  • -fcoarray=<keyword> — pick your coarray flavor, babe:
    • none — disable coarray support; using coarray declarations and image-control statements produces a compile-time error. (Default) 🫥
    • single — single-image mode, i.e. num_images() is always one. One is the loneliest number but she's slaying.
    • lib — library-based coarray parallelization; a suitable GNU Fortran coarray library such as http://opencoarrays.org needs to be linked. Alternatively, GCC's libcaf_single library can be linked, albeit it only supports a single image.
  • -fcheck=<keyword> — enable the generation of run-time checks; the argument shall be a comma-delimited list of the following keywords. Prefixing a check with no- disables it if it was activated by a previous specification. 🔍
    • all — enable all run-time test of -fcheck. the whole menu, bestie.
    • array-temps — warns at run time when for passing an actual argument a temporary array had to be generated. The information generated by this warning is sometimes useful in optimization, in order to avoid such temporaries.

Note: the warning is only printed once per location.

  • bits — enable generation of run-time checks for invalid arguments to the bit manipulation intrinsics.
  • bounds — enable generation of run-time checks for array subscripts and against the declared minimum and maximum values. It also checks array indices for assumed and deferred shape arrays against the actual allocated bounds and ensures that all string lengths are equal for character array constructors without an explicit typespec.

Some checks require that -fcheck=bounds is set for the compilation of the main program.

Note: in the future this may also include other forms of checking, e.g., checking substring references.

  • do — enable generation of run-time checks for invalid modification of loop iteration variables. bestie do not touch the loop variable, i'm begging 🙏
  • mem — enable generation of run-time checks for memory allocation.

Note: this option does not affect explicit allocations using the ALLOCATE statement, which are always checked.

  • pointer — enable generation of run-time checks for pointers and allocatables.
  • recursion — enable generation of run-time checks for recursively called subroutines and functions that are not marked as recursive. See also -frecursive.

Note: this check does not work for OpenMP programs and is disabled if used together with -frecursive and -fopenmp.

Example: assuming you have a file foo.f90, the command

gfortran -fcheck=all,no-array-temps foo.f90

compiles the file with all checks enabled as specified above except warnings for generated array temporaries. ✨

  • -fbounds-check — deprecated alias for -fcheck=bounds. old news, she's retired 💅
  • -ftail-call-workaround
  • -ftail-call-workaround=n

Some C interfaces to Fortran codes violate the gfortran ABI by omitting the hidden character length arguments as described in (the reference in the original page is literally blank here — no cap, that's how she ships 😭). This can lead to crashes because pushing arguments for tail calls can overflow the stack.

To provide a workaround for existing binary packages, this option disables tail call optimization for gfortran procedures with character arguments. With -ftail-call-workaround=2 tail call optimization is disabled in all gfortran procedures with character arguments, with -ftail-call-workaround=1 or equivalent -ftail-call-workaround only in gfortran procedures with character arguments that call implicitly prototyped procedures.

Using this option can lead to problems including crashes due to insufficient stack space.

It is very strongly recommended to fix the code in question. The -fc-prototypes-external option can be used to generate prototypes that conform to gfortran's ABI, for inclusion in the source code. 🛠️

Support for this option will likely be withdrawn in a future release of gfortran.

The negative form, -fno-tail-call-workaround or equivalent -ftail-call-workaround=0, can be used to disable this option.

Default is currently -ftail-call-workaround, this will change in future releases.

  • -fcheck-array-temporaries — deprecated alias for -fcheck=array-temps.
  • -fmax-array-constructor=n — this option can be used to increase the upper limit permitted in array constructors. The code below requires this option to expand the array at compile time. 🌈
program test
implicit none
integer j
integer, parameter :: n = 100000
integer, parameter :: i(n) = (/ (2*j, j = 1, n) /)
print '(10(I0,1X))', i
end program test
Caution: this option can lead to long compile times and excessively large object files. she's a big girl, she takes up space. 💀

The default value for n is 65535. 🔢

  • -fmax-stack-var-size=n — this option specifies the size in bytes of the largest array that is put on the stack; if the size is exceeded static memory is used (except in procedures marked as RECURSIVE). Use the option -frecursive to allow for recursive procedures that do not have a RECURSIVE attribute or for parallel programs. Use -fno-automatic to never use the stack.

This option currently only affects local arrays declared with constant bounds, and may not apply to all character variables. Future versions of GNU Fortran may improve this behavior.

The default value for n is 65536. 🧚

  • -fstack-arrays — adding this option makes the Fortran compiler put all arrays of unknown size and array temporaries onto stack memory. If your program uses very large local arrays it is possible that you have to extend your runtime limits for stack memory on some operating systems. This flag is enabled by default at optimization level -Ofast unless -fmax-stack-var-size is specified. 🔥
  • -fpack-derived — tells GNU Fortran to pack derived type members as closely as possible 🎀. Heads up though: code compiled with this option is likely to be incompatible with code compiled without it, and it may also execute slower. iykyk, it's giving "cute but chaotic."
  • -frepack-arrays — okay so sometimes GNU Fortran passes assumed shape array sections via a descriptor describing a noncontiguous area of memory 🌸. This option adds code to the function prologue to repack the data into a contiguous block at runtime. The payoff? Faster accesses to the array ✨. The catch? It can introduce significant overhead to the function call, especially when the passed data is noncontiguous. Tradeoffs, bestie.
  • -fshort-enums — this one's for interoperability with C code that was compiled with the -fshort-enums option 🫶. It makes GNU Fortran choose the smallest INTEGER kind a given enumerator set fits in, and give all its enumerators this kind. Small and mighty 💅.
  • -finline-arg-packing — when passing an assumed-shape argument of a procedure as actual argument to an assumed-size or explicit size, or as argument to a procedure that does not have an explicit interface, the argument may have to be packed — that is, put into contiguous memory 🧚. An example is the call to foo in:
          subroutine foo(a)
             real, dimension(*) :: a
          end subroutine foo
          subroutine bar(b)
             real, dimension(:) :: b
             call foo(b)
          end subroutine bar

When -finline-arg-packing is in effect, this packing is performed by inline code. This allows for more optimization while increasing code size 🔥.

-finline-arg-packing is implied by any of the -O options except when optimizing for size via -Os. If the code contains a very large number of arguments that have to be packed, code size and also compilation time may become excessive 😭. If that's the case, it may be better to disable this option. Instances of packing can be found by using -Warray-temporaries 👑.

  • -fexternal-blas — this option makes gfortran generate calls to BLAS functions for some matrix operations like MATMUL, instead of using our own algorithms, if the size of the matrices involved is larger than a given limit (see -fblas-matmul-limit) ⭐. This may be profitable if an optimized vendor BLAS library is available. The BLAS library has to be specified at link time, no cap.
  • *-fblas-matmul-limit=n* — only significant when -fexternal-blas is in effect 🦋. Matrix multiplication of matrices with size larger than (or equal to) n is performed by calls to BLAS functions, while others are handled by gfortran internal algorithms. If the matrices involved are not square, the size comparison is performed using the geometric mean of the dimensions of the argument and result matrices 📐.

The default value for n is 30.

  • -finline-intrinsics
  • *-finline-intrinsics=intr1,intr2,...* — prefer generating inline code over calls to libgfortran functions to implement intrinsics 💖.

Usage of intrinsics can be implemented either by generating a call to the libgfortran library function or by directly generating inline code. For most intrinsics, only a single variant is available, and there is no choice of implementation. However, some intrinsics can use a library function or inline code, where inline code typically offers opportunities for additional optimization over a library function 🌈. With -finline-intrinsics=... or -fno-inline-intrinsics=..., the choice applies only to the intrinsics present in the comma-separated list provided as argument.

For each intrinsic, if no choice of implementation was made through either of the flag variants, a default behavior is chosen depending on optimization: library calls are generated when not optimizing or when optimizing for size; otherwise inline code is preferred ✨.

The set of intrinsics allowed as argument to -finline-intrinsics= is currently limited to MAXLOC and MINLOC 🙈. The effect of the flag is moreover limited to calls of those intrinsics without DIM argument and with ARRAY of a non-CHARACTER type. The case of rank-1 argument and DIM argument present, i.e. MAXLOC(A(:),DIM=1) or MINLOC(A(:),DIM=1) is inlined unconditionally for numeric rank-1 array argument A 💅.

  • *-finline-matmul-limit=n* — when front-end optimization is active, some calls to the MATMUL intrinsic function are inlined 🔥. This may result in code size increase if the size of the matrix cannot be determined at compile time, as code for both cases is generated. Setting -finline-matmul-limit=0 disables inlining in all cases. Setting this option with a value of n produces inline code for matrices with size up to n. If the matrices involved are not square, the size comparison is performed using the geometric mean of the dimensions of the argument and result matrices.

The default value for n is 30. The -fblas-matmul-limit can be used to change this value 🎀.

  • -frecursive — allow indirect recursion by forcing all local arrays to be allocated on the stack 🧚. > This flag cannot be used together with -fmax-stack-var-size= or -fno-automatic. Like, genuinely cannot. Don't try it.
  • -finit-local-zero
  • -finit-derived
  • *-finit-integer=n*
  • *-finit-real=<zero|inf|-inf|nan|snan>*
  • *-finit-logical=<true|false>*
  • *-finit-character=n*

The -finit-local-zero option instructs the compiler to initialize local INTEGER, REAL, and COMPLEX variables to zero, LOGICAL variables to false, and CHARACTER variables to a string of null bytes 💖. Finer-grained initialization options are provided by the -finit-integer=n, -finit-real=<zero|inf|-inf|nan|snan> (which also initializes the real and imaginary parts of local COMPLEX variables), -finit-logical=<true|false>, and -finit-character=n (where n is an ASCII character value) options.

With -finit-derived, components of derived type variables are initialized according to these flags 🌸. Components whose type is not covered by an explicit -finit-* flag are treated as described above with -finit-local-zero.

These options do not initialize:

  • objects with the POINTER attribute
  • allocatable arrays
  • variables that appear in an EQUIVALENCE statement.

(These limitations may be removed in future releases 👀.)

Note that the -finit-real=nan option initializes REAL and COMPLEX variables with a quiet NaN 🫶. For a signalling NaN use -finit-real=snan; note, however, that compile-time optimizations may convert them into quiet NaN and that trapping needs to be enabled (e.g. via -ffpe-trap) 💀.

The -finit-integer option parses the value into an integer of type INTEGER(kind=C_LONG) on the host. Said value is then assigned to the integer variables in the Fortran code, which might result in wraparound if the value is too large for the kind 😭.

Finally, note that enabling any of the -finit-* options silences warnings that would have been emitted by -Wuninitialized for the affected local variables. Iconic, honestly.

  • -falign-commons — by default, gfortran enforces proper alignment of all variables in a COMMON block by padding them as needed ✨. On certain platforms this is mandatory, on others it increases performance. If a COMMON block is not declared with consistent data types everywhere, this padding can cause trouble, and -fno-align-commons can be used to disable automatic alignment 🙈. The same form of this option should be used for all files that share a COMMON block. To avoid potential alignment issues in COMMON blocks, it is recommended to order objects from largest to smallest 📏.
  • -fno-protect-parens — by default the parentheses in expression are honored for all optimization levels such that the compiler does not do any reassociation 💅. Using -fno-protect-parens allows the compiler to reorder REAL and COMPLEX expressions to produce faster code 🔥. Note that for the reassociation optimization -fno-signed-zeros and -fno-trapping-math need to be in effect. The parentheses protection is enabled by default, unless -Ofast is given.
  • -frealloc-lhs — an allocatable left-hand side of an intrinsic assignment is automatically (re)allocated if it is either unallocated or has a different shape 🦋. The option is enabled by default except when -std=f95 is given. See also -Wrealloc-lhs.
  • -faggressive-function-elimination — functions with identical argument lists are eliminated within statements, regardless of whether these functions are marked PURE or not 👑. For example, in
          a = f(b,c) + f(b,c)

there is only a single call to f. This option only works if -ffrontend-optimize is in effect ⭐.

  • -ffrontend-optimize — this option performs front-end optimization, based on manipulating parts of the Fortran parse tree 🌈. Enabled by default by any -O option except -O0 and -Og. Optimizations enabled by this option include:
    • inlining calls to MATMUL,
    • elimination of identical function calls within expressions,
    • removing unnecessary calls to TRIM in comparisons and assignments,
    • replacing TRIM(a) with a(1:LEN_TRIM(a)) and
    • short-circuiting of logical operators (.AND. and .OR.).

It can be deselected by specifying -fno-frontend-optimize 💅.

  • -ffrontend-loop-interchange — attempt to interchange loops in the Fortran front end where profitable 🎀. Enabled by default by any -O option. At the moment, this option only affects FORALL and DO CONCURRENT statements with several forall triplets ✨.

🌿 ENVIRONMENT 🌿

The gfortran compiler currently does not make use of any environment variables to control its operation above and beyond those that affect the operation of gcc 🫶. That's it, that's the whole section. No secret env vars, bestie, sorry 😭.

💀 BUGS 💀

For instructions on reporting bugs, see <https://gitlab.arm.com/tooling/gnu-devtools-for-arm/-/issues/> 📝. Go off, report that bug, the maintainers literally want to know 👑.

👀 SEE ALSO 👀

gpl(7), gfdl(7), fsf-funding(7), cpp(1), gcov(1), gcc(1), as(1), ld(1), gdb(1), dbx(1) and the Info entries for gcc, cpp, gfortran, as, ld, binutils and gdb 🦋. A whole friend group fr fr.

🎀 AUTHOR 🎀

See the Info entry for gfortran for contributors to GCC and GNU Fortran 💖.

Okay bestie, legal time — but stay with me, it's actually kinda wholesome. 💖

Copyright © 2004-2025 Free Software Foundation, Inc. That's the whole squad at the FSF, holding it down since 2004, no cap. 👑

Permission is granted to copy, distribute and/or modify this document under the terms of the GNU Free Documentation License, Version 1.3 or any later version published by the Free Software Foundation — with the Invariant Sections being "Funding Free Software", the Front-Cover Texts being (a) (see below), and with the Back-Cover Texts being (b) (see below). A copy of the license is included in the gfdl(7) man page. 📖✨

Fr fr, read that bit again — the invariant section literally has to stay exactly as "Funding Free Software". The way that section is locked in, iconic. 🔒

🌸 (a) The FSF's Front-Cover Text is:

A GNU Manual

That's it. That's the whole front cover. Minimalist queen. 🎀

🦋 (b) The FSF's Back-Cover Text is:

You have freedom to copy and modify this GNU Manual, like GNU
software.  Copies published by the Free Software Foundation raise
funds for GNU development.

Okay but this one lowkey eats — freedom to copy and modify, just like GNU software itself, and every copy sold by the FSF feeds back into GNU development. Circular economy but make it open source. 💅🌈

💀 Real talk though: this isn't a suggestion, it's the actual license terms. Don't strip the invariant section, don't cook up your own cover texts, just vibe with the gfdl. 🙈

And that's a wrap on GFORTRAN(1), bestie!! 🫶 You made it through the entire page — I'm so proud. Go write some Fortran, compile it with gfortran, and remember: every flag you learned in here is now permanently in your brain. Main character energy only. 🌟

This little beauty is from gcc-15.3.1, dated 2026-06-27, and it lives its life filed under GFORTRAN(1) — go forth and man it whenever you forget a flag. Mwah. 💜🎀

📦 where this page comes from